• 패션비즈니스
• /
• 제15권4호
• /
• pp.182-189
• /
• 2011

Dyeing properties of cow leather was investigated with Tumeric powder. The effects of dyeing conditions, mordanting conditions, color change, and color fastnesses were studied. The results were as follows. The dye uptake increased as dye concentration, dyeing temperature, and bath ratio increased. In the effect of dyeing time, the highest dye uptakes showed at 20 minutes and decreased after that point. Pre mordanting was more effective than the post mordanting, and the dye uptakes improved all mordanted fabrics. The highest K/S values showed in pre-Al sample, and the lowest K/S values showed in post-Cu one. The values of Hunter on the samples were more changeable $L^*$ and $b^*$ than $a^*$, and all samples showed Yellow color in Munsell value. But the mordanting methods and mordanting agents were not significant in the color changes. The light fastness of dyed samples showed 1 grade, the dry cleaning and abrasion fastnesses did not improved except post-Fe wet sample.

• Fibers and Polymers
• /
• 제7권2호
• /
• pp.169-173
• /
• 2006

Six nano disperse dyes were prepared using corresponding O/W nanoemulsions which were obtained with sodium laurylsulphate and caprylic triglyceride. The average particle size of the dyes prepared were in the range of $110{\sim}130nm$. Exhaust dyeing using nano dyes resulted in low exhaustion yields of $17{\sim}26%$ on regular polyester fiber and $28{\sim}38%$ on ultramicrofiber polyester. The observed low exhaustion yields of nano disperse dye can be explained by the solubilization of dye particles into surfactant micelles as well as the high stability of the nanoemulsions, these might reduce the capacity of dye uptake onto the fibers. However, higher K/S values of dyeings with nano dyes on ultramicrofiber sites compared to those on regular polyester sites suggested their potential to be more efficient dyes for finer denier microfiber polyesters.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.117-117
• /
• 2012

섬유의 단사섬도가 감소할수록 단위중량당 표면적이 커지고, 굴곡 반경이 작아지며 굴곡시 반발성이 낮아지기 때문에 일반 합성섬유가 가지고 있는 감성을 크게 개선시키고 새로운 기능성을 부가할 수 있다. 이러한 초극세사를 단독으로 사용하여 섬유제품을 제조할 수 있지만 타 섬유와 복합하여 제반 물성 및 경제성을 향상시킬 수 있다. 초극세사와 타섬유를 복합하면 의류용 고밀도 직물, wiping cloth, 인조피혁 등의 용도로 활발히 전개되고 있다. 한편, 나노필라멘트는 일반 섬유보다 섬도가 월등히 낮아 농색을 얻기가 어려워 색상 영역에 제한이 있으며 견뢰도가 다소 불량한 단점이 있다. 나노필라멘트를 일반 섬도의 PET와 복합한 제품의 경우 염착거동이 서로 상이하여, 초극세화 및 응용기술 개발에 있어 감량, 염색 및 후가공 기술 확보는 제품성능 향상을 위해서 매우 중요한 기술적 요소이다. 본 연구에서는 새롭게 개발된 단사섬도 800nm급 해도형 폴리에스테르 나노필라멘트 섬유와 잠재 권축사 등의 일반 폴리에스테르 섬유를 교직한 섬유제품의 염색성 및 견뢰도 특성을 비교하여 고찰함으로써 제품화에 필요한 요소 기술의 기초를 마련하고자 한다.

• 한국염색가공학회지
• /
• 제13권2호
• /
• pp.28-28
• /
• 2001

Four kinds of neutral sodium salts with different anions, NaF, NaCl, NaBr, and NaI, were added to the dye bath to accurately understand the effect of anions on the reactive dyeing of silk with C. I. Reactive Black 5. The sodium cation lowered the negative surface potential of the silk and increased the dye-uptake on fille fabric as reported previously. However, because of the discrepancy in the anions′inhibition power from cation′s lowering the surface negative potential the amount of the dye on the silk fiber was different from each other in the order of $F^-\;>\;Cl^-\;>\; Br^-\;>\;I^-$. The activation energy($E_a$) for the dyeing was in the order of $F^-\;>\;Cl^-\;>\; Br^-\;>\;I^-$ but the dye-uptake on the fabric and the activation free energy(Δ$G^*$), the real energy barrier for the reaction, were in the order of $F^-\;>\;Cl^-\;>\; Br^-\;>\;I^-$ because the strength of the interaction of the anions with sodium cations was the same as the order of the latter. In other words $F^-$ exerted the weakest electrostatic force on $Na^+$and competed with the dyestuff anions least of all. The decrease in Δ$S^*$may be due to the looesly bonded activated complex of dyestuff anions, sodium cations and fiber molecules at transition state. It was clarified from the Bronsted equation that sodium salts with different anions also had fille ionic strength effect and the specific salt effect on the reactive dyeing.

• 한국의류학회지
• /
• 제38권3호
• /
• pp.415-426
• /
• 2014

This study investigated the color change, enhancement of dye uptake, washing fastness, and light fastness of cotton and silk when dyed with Juniperus chinensis and Terminalia chebula (combination dyeing) using various methods. The dyeing methods were 1) dyeing Juniperus chinensis extract and Terminalia chebula Retzius extract sequentially (J-T), 2) dyeing Terminalia chebula Retzius extract and Juniperus chinensis extract sequentially (T-J), 3) dyeing Juniperus chinensis extract and Terminalia chebula Retzius extract simultaneously (J+T), and 4) dyeing Juniperus chinensis extract 4 times repeatedly and followed by a dyeing Terminalia chebula Retzius extract in sequence. In terms of increased dyeing uptake, combination dyeing (dyeing 2 times like method 1, 2, 3) had the same impact as the repeated dyeing (method 4). The color of J, T combination dyeing showed wide range of mixed YR series, Y series resulting from Terminalia chebula Retzius, and R series resulting from Juniperus chinensis. In cotton, J-T dyeing method showed superior enhancement of dye uptake, and T-J method in silk. In both of the cases, Y series color from Terminalia chebula Retzius extract was mainly shown (Y series color was superior to R series color after dyeing). Therefore, it is recommended for cotton to implement T-J method and for silk to implement J-T method in order to enhance both dyeing uptake and emphasize the color of R series. The K/S value of combination dyed fabrics was decreased by increasing washing time; however, the K/S value of combination dyed fabrics was increased by increasing UV irradiation time. But after repeated washing and longer UV irradiation, ${\Delta}E$ value of combination dyed fabric became smaller compared to fabric dyed with Juniperus chinensis only. Thus, it was found that after J, T combination dyeing, fabric became less prone to fading by washing and UV than after Juniperus chinensis single dyeing was done.

• 한국의류학회지
• /
• 제46권1호
• /
• pp.132-146
• /
• 2022

To explore the potential use of Ecklonia cava as a natural dye for textiles, silk fabric was dyed with Ecklonia cava extracted by hot water under varied conditions, including temperature, duration, dye concentration, mordanting, and pH adjustment. The fabric was also evaluated for fastness, sun-protective property, and deodorization. Ecklonia cava extract was estimated by FT-IR to have polyphenol as a main functional colorant in plants, while the existence of phlorotannins through the UV-spectrum method was also confirmed. The fabric was optimized for maximum dye uptake at a temperature of 80℃ for a duration of 50 minutes along all dye concentrations. The dyed fabric showed a hue of Yellow Red under all dyeing conditions while additional color tones, such as grayish and dark, were generated through mordanting and pH adjustment. Both good sun-protective properties and a positive deodorization rate were also recorded, with more than 20% (owf) Ecklonia cava extract on silk fabric. These results imply that Ecklonia cava has great potential to be used as an eco-friendly natural dye and in fashion goods with skin-health functions made of silk.

• 한국염색가공학회지
• /
• 제5권3호
• /
• pp.206-215
• /
• 1993

In the prior study, wool gabardines were treated with alkaline proteases which were some kinds of enzyme to decompose protein, and their tensile strengths were determined, and the surface of the fibers were also observed using a scanning electron microscope. Enzylon ASN 30 and Alkalase 2.5L DX did not show much effect on the weight loss of wool, however, the weight loss of wool increased considerably with treating Esperase 8.0L. Pretreatment of wool with dichloloisocyanuric acid before protease-treatment increased the weight loss of wool to a great extent. In this study, the enzyme treated wools dyeing behaviors with acid dye, Milling Cyanine 5R, were mainly investigated. The protease-treatment remarkably increased not only the rate of dyeing but also the saturation dye uptake. From these results, it seemed likely that the structural relaxation of adhesive filler of interscale or intercellular cement facilitated the dye penetration into the fibers, at the same time, the change in the inner structure of the wool fibers by the protease made the fixation of the dyes more efficient.

• 한국염색가공학회지
• /
• 제6권4호
• /
• pp.27-33
• /
• 1994

Wool fabrics were treated with low temperature oxygen plasma and/or protease, and examined for their mechanical and dyeing properties. By plasma-treatment the strength of wool fabric increased and higher rate of weight loss for protease treatment was obtained. When dyed by levelling type acid dye equilibrium dye uptake appeared same, but rate of dyeing increased by the plasma treatment, while, with milling type acid dye, both of them increased greatly in the order of untreatedplasma/protease-treated. It was assumed from the above results that plasma affects the surface of fiber, and enzyme attacks mainly the inner part of fiber. This was confirmed again by scanning electron microscope.

• 한국염색가공학회지
• /
• 제13권3호
• /
• pp.180-187
• /
• 2001

Generally, polyester microfiber has much greater dye uptake than that of regular ones. In spite of high dye up-take visual shade depth of dyed fabric decreases with smaller denier, which results in poor washing fastness of dyed fabric. In this study, in order to investigate the washing fastness, polyester microfiber fabric was dyed by using two type of disperse dyes and treated with 3 different reduction clearing methods. The reduction clearing methods in this study are normal alkaline reduction clearing, $N_2$ gas replacement method, and ultrasonic treatment during reduction clearing. The results were as followings ; The most important factors affecting the washing fastness of polyester artificial suede fabric were found to be the reduction clearing method, the chemical structure of used disperse dyes and the structure and denier of fibers. It was also obtained that the heat treatment of dyed fabric decreased the washing fastness due to the dye migration from inner phase to surface.

• 한국염색가공학회지
• /
• 제14권6호
• /
• pp.319-327
• /
• 2002

Nylon 6 ultramicrofiber(UMF, monodenier 0.074d) and regular staple fiber(monodenier 2.05d) were dyed with acid and disperse dyes to investigate the effect of the difference of the fiber fineness. Also X-ray diffraction pattern, birefringence, DSC thermogram, moisture regain and water absorption of these fibers are measured. The dyeing rate of nylon UMF with acid dyes is increased compared with that of regular fiber, but not increased for disperse dyes. Also the saturation dye uptake of UMF with acid dyes is higher than that of regular fiber, while it is unchanged for disperse dyes. The moisture regain of UMF is similar to the regular fiber, whereas the water absorption of UMF is two times th그n that of the regular fiber. The crystallinity percentage of UMF is higher than that of regular fiber.