• 펄프종이기술
• /
• 제43권1호
• /
• pp.1-10
• /
• 2011

To investigate the combination dyeing properties of natural dyes, the combination dyeing using gallnut,-Al, Cu, Fe-sappan wood, and gallnut-Al, Cu, Fe-gardenia was performed on bast fiber of mulberry, cotton, silk, and their K/S values, colors, and sunlight fastness were measured. The gallnut-Al, Cu, Fe-gardenia dyeing showed the highest K/S values when the dyeing concentration of gallnut is 3%. It tended to show the higher K/S values than gallnut-Al, Cu, Fe-sappan wood. The silk showed the highest values of in K/S, and then followed by cotton, and bast fiber of mulberry. The mordants developed different colors on the bast fiber and the cotton treated with gallnut-Al, Cu, Fe-sappan wood. However, the silk showed a series of YR, showing no effect of the mordants on the development of color. The combination dyeing of gallnut-Al, Cu, Fe-gardenia showed a series of Y. The results showed that sappan wood could develop various colors but gardenia could develop a series of Y. No distinct improvement on sunlight fastness of the combination dyeing was observed.

• Journal of the Korean Wood Science and Technology
• /
• 제49권2호
• /
• pp.134-141
• /
• 2021

This study was conducted to investigate the potential of the neutral extract (NE) prepared by treating P. radiata bark with aqueous NaHCO3 solution as a natural dyestuff. Silk and cotton fabrics were dyed at four different NE concentrations, 0.5%, 1.0%, 1.5%, and 2.0% o.w.b. (on the weight of bath). The fabric to liquid ratio of 1 : 50, dyeing temperature of 90℃, and dyeing time of 90 min were used as the fixed condition. The appropriate NE dyeing concentration of silk and cotton fabrics was 1.5% o.w.b. Colors of the dyed silk and cotton fabrics were brown and light brown, respectively. From colorfastness assessment, both dyed silk and cotton showed good washing and rubbing fastness, but poor light fastness. NE dyed fabrics exhibited excellent ammonia deodorization property and antibacterial activity against Staphylococcus aureus and Klebsiella pneumoniae. Therefore, NE of P. radiata bark could have the potential for use as a functional brown dyestuff.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.220-229
• /
• 2021

This study is aimed to a textile design with a motif of korean endemic plants and a method for printing it in an eco-friendly manner. The floral pattern with the motif of korean endemic plants was designed using Illustrator and Photoshop program. CMYK color, which is the basic color of Digital Textile Printing (DTP), is based on natural dyes, and various colors, achromatic colors and pastel tones are applied. As a result, half-linen and cotton were suitable as a result of designing and applying a floral pattern of a korean special plants. Also, as a result of analyzing the printing effect by colorway and DTP for each material, it was printed uniformly and the washing fastness was good. However, fastness of color change showed low, indicating that a follow-up study was needed. This study contributes to environmental conservation through eco-friendly printing and the korean endemic plants will be interested in people around the world beyond korea.

• 한국의류산업학회지
• /
• 제14권2호
• /
• pp.311-319
• /
• 2012

The purpose of this study is to investigate the dyeing property of gromwell on modified cotton fabric by chitosan. Modified cotton fabrics were manufactured by crosslinking agent epichlorohydrin in the presence of chitosan. Gromwell colorants were extracted with methanol. Modified cotton fabrics dyed using gromwell were post-mordanted using Al, Fe and Cu. The dyeability (K/S) and color factors (L, a, b, ${\Delta}E$ and h) of modified cotton fabrics were measured by computer color matching. Additionally the fastness to washing and light were also investigated. The dye-uptake of modified cotton fabrics increased with the dyeing time. The saturated dyeing time was about 10minutes at $50^{\circ}C$. The dyeability (K/S) was remarkably increased with increasing content of chitosan because of having a amine group of chitosan. Modified cotton fabrics were dyed yellowish red by non and Fe mordanting, blueish red by Al and Cu mordanting, respectively. The washing fastness of non, Al, Fe and Cu mordant in the presence and absence of chitosan were increased $1{\rightarrow}2$, $3{\rightarrow}4$, $4{\rightarrow}4-5$ and $4{\rightarrow}4-5$ respectively. And light fastness of non, Al, Fe and Cu mordant in the presence and absence of chitosan were increased $1{\rightarrow}1-2$, $1{\rightarrow}1-2$, $1.2{\rightarrow}2.3$ and $1-2{\rightarrow}2$ respectively.

• 한국의류산업학회지
• /
• 제10권4호
• /
• pp.552-559
• /
• 2008

Recent days, various inner wears, sheets and interior goods are manufactured using materials dyed with loess emphasizing its improved blood circulation, metabolism, anti-bacterial, deodorizing properties, and far-infrared ray emissions. The purpose of this study is to investigate the effect of chitosan treatment on the dyeing of cotton fabric using loess as colorants. Particle size of loess, the morphology and dyeability(K/S) of chitosan crosslinked cotton fabrics, and washing durability of loess dyed cotton fabric were investigated. In this study, cotton fabrics were treated with a crosslinking agent, epichlorohydrin, in the presence of chitosan to improve the dyeing properties of cotton fabrics with natural dye by the chemical linking of chitosan to the cellulose structure. This process was applied by means of the conventional mercerizing process. The results obtained were as follows; Mean average diameter of loess was $1.13{\mu}m$. According to various conditions, the optimum dyeing conditions for cotton fabrics pretreated by 1% chitosan treatment was where 10%(owb) of loess was applied at $90^{\circ}C$ for 120minutes, while for cotton fabrics without chitosan treatment was where 15%(owb) of loess was applied at $90^{\circ}C$ for 150minutes. Overall, K/S value of loess dyed cotton fabric pretreated with 1% chitosan was higher than that of cotton fabrics without chitosan treatment. The Color fastness, washing fastness and light fastness of loess were excellent as 4-5grade.

• 복식문화연구
• /
• 제24권4호
• /
• pp.431-440
• /
• 2016

The purpose of this research is to revive the colors of combination dyeing and mixed dyeing with natural dyestuffs. The fabrics used were cotton and rayon. The natural dyestuffs used in this research were indigo, Phellodendron amurense, and Caesalpinia sappan. The effects of combination dyeing were as follows. First, all samples showed deeper colors. Second, according to the results of the surface K/S measurement, while the surface K/S of cotton was over 15, that of rayon was over 17. Third, the results of the light fastness measurement showed the superiority (by over grade 4) of all the samples, except in the case of rayon fiber sample no. 6 (which had been pre-dyed with indigo five times before being dyed with P. amurense once and then being dyed with C. sappan once). In the color fastness to washing measurement, all fibers showed superiority (by over grade 3~4). In addition, the color fastness to dry cleaning of all fibers was satisfactory or excellent (by over grade 3). Fourth, according to the results of the tensile strength measurement, it tended to decrease in the case of cotton and increase in the case of rayon. Fifth, the results of the density measurement showed that the density of cotton decreased by about 15~20% in the case of warp and 10% in the case of weft for all samples. The density of rayon decreased 20% in the case of warp for all samples and increased 30% in the case of weft for all samples.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.303-308
• /
• 2004

A natural colorant was extracted from Cassia tara L. using buffer solutions (pH: 2-11) as extractants. The dyeing solution (Cassia tara L. extract) extracted using pH 9 buffer solution was found to give the highest K/S values of dyed fabrics. Cotton and silk fabrics were dyed with Cassia tara L. extract at $60^{\circ}C$ for 60 min with pre-treatment of various metal salts as mordants. It was found that Cassia tara L. extract was polygenetic dyestuffs and its major components were anthraquinones. Studies have been made on the effects of the kind of mordant on dyeing properties and colour fastnesses of cotton and silk fabrics. The K/S of cotton fabrics increased in the order of the dyeing using $FeSO_4 >CuSO_4> ZnSO_4> MnSO_4\cong Al_2(SO_4)_3 > NiSo_4 > none$, however, the K/S of silk fabrics increased in the order of the dyeing using $FeSO_4 > CuSO_4 > ZnSO_4\cong Al_2(SO_4)_3 > MnSO_4\cong NiSO_4 > none$. It was found that the K/S values of dyed fabrics were largely affected by the colour difference $(\DeltaE)$ between mordanted fabric and control fabric. However, they were not depended on the content of mordanted metal ion of the fabrics. Mordants $FeSO_4$ and CuSO_4$ for cotton fabric, $FeSO_4,\; CuSO_4,\; and\; Al_2(S0_4)_3$ for silk fabric were found to give good light fastness (rating 4).

• 한국염색가공학회지
• /
• 제8권5호
• /
• pp.7-16
• /
• 1996

The air-flow dyeing machine is a new type of dyeing machine. Which is an energy saving type to be able to dye the fabrics with the lowest liquor ratio and in shorter time. This machine is operated with an aerodynamic system rather than a hyd raulic system for traditional jet or overflow dyeing. An air-flow dyeing machine(Green-flow) by the use of aerodynamic technology was developed and compared with the Luft-roto machine made by Thies Company, Germany, in this study. Three samples were dyed with both machines under the same dyeing conditions and color fastness, dyeing levelness, drapability, and mechanical properties of these samples were compared. The results were as follows; Both machines have almost the same dyeability. The dyeability was good at liquor ratio of 1: 3.5 and the speed of 450yds/min. The order for drapability was Crepe de Chine > Cool Peach > Charmeuse. Except for the color fastness of sublimation being below class 4, most color fastness of samples dyed with Green-flow m/c were above class 4. The maximum speed was 510yds/min. for Crepe de Chine and the standard deviation of K/S value was lower for Charmeuse and Cool Peach when employed on the "Green-flow" machine and lower for Crepe de Chine when employed on the Luft-roto machine. Comparing with dyeing of the Green-flow machine and that of the Luft-roto machine, the RT of the Charmeuse was found to be higher with the Green-flow machine and thus the sample had an improved wrinkle recovery. LT and WT of Cool Peach were higher, and shear properties(G, 2HG, 2HGS) of Crepe de Chine were higher, both turning out as suitable for clothing. clothing.

• 한국염색가공학회지
• /
• 제32권1호
• /
• pp.38-43
• /
• 2020

To overcome the harmful effects caused by conventional oxidative hair dyes, natural colorants becomes more popular in the hair dyeing. By extracting Sagassum fusiforme powders with aqueous alkaline solution as a solvent at 130℃ for 60 minutes, a fucoxanthin concentration of up to 216㎍/ml can be obtained. UV/Vis analysis was used to prove the presence of fucoxanthin in the extract powder. A K/S value of 23.8 can be obtained when wool fabrics were dyed with the extract at 120℃ for 60 minutes under pH 2. The color fastness properties of the dyed wool fabrics were very good as indicated by rating 4 for laundering(color change), rating 3 or higher for rubbing, and rating 5 for light irradiation. The dyed wool fabric was found to have antimicrobial activity against Staphylococcus aureus. The antioxidant and antimicrobial activity of the Sagassum fusiforme extract can be an effective functional hair colorant. Hair dyeing with the extract formulation at 45℃ for 40 minutes under pH 5 accomplished a K/S value of 8.9. The color fastness of the dyed hair showed rating 3 against light irradiation, which increased to rating 5 with after-mordanting of tannin acid.

• 한국잠사곤충학회지
• /
• 제28권1호
• /
• pp.72-78
• /
• 1986

견에 대한 오배자탄닌과 합성탄닌의 처리조임이 견의 탄닌증량율에 미치는 영향과 탄닌증량견의 염색조건 및 실용적 특성을 구명하기 위하여 시험결과 1. 견의 증량율을 기안한 합리적인 탄닌처리 농도는 오배자 30g/l, 합성탄닌산 15g/l이었고, 처리온도 및 시간은 8$0^{\circ}C$에서 60분 내외 처리용액의 산도는 pH 2-3이었다. 2. 탄닌처리 견의 염색조건에 있어서 부착된 탄닌의 탈락을 적게하며 염착농도(K/S)를 향상시킬 수 있는 OrangeII에 의한 합리적 염색온도 및 시간은 6$0^{\circ}C$, 90분이었다. 3. 탄닌염색 가공견포의 Soaping에 의한 색착($\Delta$E)는 미가공 견포에 비하여 현저히 감소됨으로서 세탁견도가 2급이나 향상되었다. 4. 탄닌 염색가공 견포의 자외선 조사에 의한 dyeloss율은 무처리염색견포의 1/6정도로 감소됨으로서 탄니처리 견포의 내광성이 현저히 개선되었다. 5. 탄닌 염색가공 견포의 마찰견도와 발수성은 미가공 견포와 같은 수준이었으나 Drape계수는 감소됨으로서 의복의 착용감이 향상되었다.