• Textile Coloration and Finishing
• /
• v.7 no.1
• /
• pp.72-79
• /
• 1995

The effect of copper sulfate/thiourea on the diffusion and the dye exhaustion of two dyes, C. I. Acid Orange 7 and C. I. Food Yellow 3 in nylon 6 fiber has been studied. The results obtained from the experimetal are as follows : 1) Copper sulfate reacted with thiourea at constant temperature and then generated the colorless trasparent coordination compound, and then combinated end group of carboxyl of nylon 6 fiber. 2) The coordination compound [$Cu_{2}$($TU_{6}$)] ($(SO_{4})_2$) is conducted at pH 5-6 in solution intensity and repulsed the sulfonic acid group of dyes, and therefore the diffusion of dyes is restraint. 3) Dye uptake and diffusion coefficient were decreased in the order of untreated > copper sulfate/thiourea-treated > tannin-treated.

• Textile Coloration and Finishing
• /
• v.15 no.5
• /
• pp.301-309
• /
• 2003

Of the various types of dye that can be used to apply polyamide fibers, acid dyes and pre-metallised acid dyes are great in use so far. However, since these acid dyeings suffer from dye loss during laundering, recourse to an aftertreatment is usually necessary to achieve adequate fastness to washing. In the case of reactive dyes, the characteristically high washfastness of dyeings comes with the concomitant advantages of brightness and low environmental impact. Despite the obvious advantages, the commercialization of reactive dyes for polyamide fibers has not gained widespread success. In this context, the rewards for approach are likely to be considerable. Heterobifunctional reactive dyes were applied to polyamide fibers using various conditions. Optimum conditions and fixation were determined. The forms in which the vinylsulphone and hydrolyzed moieties were examined using HPLC-Mass. In addition, it was found that the extent of the washfastness secured, in terms of both change in color and staining of adjacent multifiber was being acceptable.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.1-7
• /
• 1994

A low-temperature dyeing system for silk fabrics based on a redox system has been investigated. Some factors affecting dyeing of silk fabrics with levelling acid dyes in the absence and presence of certain redox system were investigated under different conditions. The variables studied were; type and concentration of redox system, dyeing conditions, i. e. temperature and time, dye concentration, material-to-liquor ration(LR) and colour fastness. The colour strength(K/S value) is outstandingly higher in the presence than in the absence of redox system. A comparison between the colour strength values of such dyeings abtained the three redox system would call for the following order ; Glyoxal/hydrogen peroxide>thiourea/hydrogen peroxide>glucose/hydrgen peroxide> nothing. In the presence of redox system, free radicals are supposed to be formed in both the fiber and the dye and the interaction between these free radicals bring about covalent fixation beside the usual electrostatic bonds, hydrogen bonds and Van der Waals forces.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.97-104
• /
• 1995

The photochromic dyes(spiroxazine) as a susceptible material were synthesized by condensing 1-nitroso-$\beta$-naphthol with piperidine. The melting point of the synthesized spiroxazine dye was 245$^{\circ}C$. Irradiation with ultraviolet light had effect on reversible coloration reaction. The photochromic dye microcapsules were produced by interfacial precipitation method using polyvinylalcohol and ethylcellulose. The average diameter of microcapsules was 5.4$\mu$m. The dyeability and fastness of dyeings of the microcapsule fibers were increased by pretreatment of the cationic agent.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.3
• /
• pp.391-400
• /
• 2009

The purpose of this study is to investigate the efficacy of safflower yellow colorant as a natural dye for hair coloring. The dyeing properties of safflower yellow colorant on hair were explored to obtain optimum conditions. Also, the effect of mordant was studied in terms of dye uptake, colorfastness, and hair damage to better understand the characteristics of the colorant. Tensile strength measurement and SEM analysis were carried out for investigating hair damage to light exposure and washing. On the basis of obtained results considering possible hair damage, optimum dyeing conditions were set 100%(o.w.h.) colorant concentration, pH 5, $40^{\circ}C$, and 20min. Dye uptake was improved more effectively by repeated dyeing rather than by increasing concentration. Pre-mordanting method improved dye uptake slightly, irrespective of mordant type. The safflower yellow colorant produced Y colors on hair. Cu and Fe mordants improved washing and light fastness slightly. Better strength retention was obtained with the mordanted-dyed hair than the unmordanted-dyed hair after light irradiation for 40 hours and 10 repeated washing. The hair was more damaged by light exposure than by washing. It was concluded that the safflower yellow colorant can be used as a natural semi-permanent hair dye producing Y color without mordanting.

• Journal of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.12-16
• /
• 1967

Fading of Chlorantine Fast Red 5B (C.I. Direct Red 81) on cotton fabric exposed to carbon are light was examined. It was observed that the dye had anomaly in CF curve slope, while normal in CFG one. Auther considered that the reason for discrepancy of the one with the other curve slope might be appeared from Weber-Fechner law, and derived following equation $F_v=[logC_0-log(C_0-C_0F_t/100)]{\times}100/(logC_0+b)$ where $F_t$; the proportion of dye faded after t hour exposure. $F_v$; the proportion of dye faded after t hour exposure, when a pattern is judged by visual method $C_0$; initial dye concentration. b; constant. also, the reason for increasing lightfastness with dye concentration was discussed on view of the above equation.

• Textile Coloration and Finishing
• /
• v.19 no.1 s.92
• /
• pp.1-11
• /
• 2007

Dyeing of polyester/cotton blends is usually carried out through the two-bath or one-bath two-step dyeing method using proper disperse dyes and reactive dyes for each fiber. However, the dyeing requires relatively long and complicated procedure as well as there are some problems such as lower dyeability. In the present study, new one-bath one-step dyeing process was investigated using disperse dyes having amino groups and hetero-bifunctional bridge compound(DBDCBS) including dichloro-s-triazinyl groups and ${\alpha},{\beta}$-dibromopropionylamido groups to improve the dyeability of cotton component in polyester/cotton blends. And the one-bath dyeing properties of polyester/cotton blends was evaluated by various dyeing conditions such as pH, temperature and dye concentration, The optimum dyeing condition was pH 4 and $110-120^{\circ}C$. Color fastness were relatively good because of the colvalent bond formation between DBDCBS-reacted cotton fiber and disperse dye.

• The Research Journal of the Costume Culture
• /
• v.24 no.6
• /
• pp.777-787
• /
• 2016

This study was carried out in order to provide useful data for planning fabrics of summer eco-friendly fashion products. The fabrics used in this study were four cellulose fibers: cotton, cotton/mulberry blended, flax, and flax/lyocell blended. Dyeing with natural indigo was carried out under three different reducing conditions (i.e., general, eclectic, and eco-friendly) that have different reducing agent and pH levels, and hydrosulfite and glucose were used as a reducing agent. The dye uptake (K/S value) of fabrics dyed with natural indigo by a reducing condition was the highest at 660nm. Regardless of the fabrics, dye uptake was the highest under the general reducing condition and the lowest under the eco-friendly reducing condition. Under different reducing conditions, the dye uptake of natural indigo fabrics with the maximum absorption wavelength indicated a difference. The colorfastness of cellulose fabrics that were dyed with natural indigo had a rate of 4 to 5 except for rubbing fastness, which indicated good colorfastness. Additionally, natural indigo-dyed cotton and flax fabrics had good antibiosis. When the color characteristics of fabrics dyed with natural indigo were measured, all of the three reducing conditions created purple blue (PB) colors, and the color characteristics of dyed fabrics by reducing condition and fabric showed significant differences.

• Journal of the Korean Home Economics Association
• /
• v.35 no.3
• /
• pp.115-124
• /
• 1997

In this study, Water Repellent Finish was carried out before dyeing on cotton fabrics. It was aimed to improve on dyeing properties of cotton fabrics with direct dye. The results obtained were summerized as follows: 1. The K/S value of water repellent finished cotton fabrics increased. This phenomena in water repellent finished cotton fabrics were much more noticiable than unfinished cotton fabrics. 2. The color fastness(light, washing, and rubbing) of water repellent finished cotton-dyed were worse than those of unfinished cotton-dyed with direct dye. △E of water repellent finished cotton fabrics wasn't showed significant difference as compared with that of unfinished cotton fabrics. 3. The water repellency of finished cotton after dyeing got down from 100 to 70. That of finished-cotton before dyeing was 100. 4. Moisture regain, stiffness and weight of finished cotton fabrics were not almost differenciated with unfinished cotton fabrics. Moreover, the tensile strength of finished cotton fabrics was increased compared to that of unfinished cotton fabrics. As conclusion, according to the above results when the cotton fabrics were dyed with direct dye, it was much more effective that water repellent finished cotton fabrics were dyed rather than trational process, that is pre-dyeing after-finishing even if, by low liquor ratio. The physical properties of fabrics were maintained or increased.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.119-129
• /
• 2020

Unlike synthetic dyes, natural dyes do not affect the human body or create atmosphere pollution that are also mothproof, antibiotic and sterilized. This study examined the changes in dye adsorption properties according to mordant types and mordanting method to qualify trends using sage and rosemary extracts. Dyeability of sage extract is often similar to rosemary extract regardless of dyeing conditions. Dyeing properties of herb colorants on cotton, silk and wool fiber and effect of dyeing conditions on dye uptake were also compared. Dyed fabric showed a yellowish color and the dyeing affinity was somewhat good with rosemary extract. The surface color of the dyed fabrics was darkened by mordant treatment. The K/S value of herb colorants of protein fiber was higher than cellulose fiber. The concentration of mordant having the highest dyeing affinity was different from the mordant type. Regardless of the type of fiber, the K/S value of premordanting was the highest in mordanting method, and the K/S value of simultaneous mordanting indicated no noticeable mordant effect. The fastness of washing of silk fabric was reduced the most by mordant treatment. The lightfastness was reduced in Al mordant treatment regardless of the type of fiber. The lightfastness of wool increased somewhat by mordant treatment.