• 한국염색가공학회지
• /
• 제24권2호
• /
• pp.106-112
• /
• 2012

As a subsequent research of the previously reported$^{9)}$, a series of diaminoanthraquinoid blue dyes having hexyl, heptyl and octyl substituents were newly synthesized in order to investigate dyeability toward polypropylene fibers. As the length of alkyl groups introduced to the chromophore increased, the dyeability of the dyes toward polypropylene fibers also increased and then gradually decreased. From the result of dyeing, the hexyl-substituted dye showed the highest color strength and deep shade on pure polypropylene fibers. The good fastness rates to wash, rubbing and light were also obtained for all of the synthesized dyes.

• 한국염색가공학회지
• /
• 제23권1호
• /
• pp.21-27
• /
• 2011

The natural dyeing of cotton fabric with gardenia blue powder was studied. Cotton fabrics were treated with chitosan in order to increase K/S values and colorfastness. K/S values were increased with increasing the concentration of gardenia blue powder, dyeing time and temperature, and the lower pH of dye bath. In case of chitosan finishing, K/S values were increased, and ${\lambda}_{max}$ shifted to 600nm at 400nm. The wash fastness was improved, but the abrasion fastness was lowered in the case of wet rubbing.

• 한국염색가공학회지
• /
• 제32권3호
• /
• pp.128-134
• /
• 2020

Heat and flame protecting cloth is usually made of meta aramid fiber because of its own properties. But the high inter molecular hydrogen bonding and high Tg is the reason of the difficulty to dye meta aramid fiber. Recently, it was commercialized that the easily dyeable meta aramid fiber(AMD) for improving dyeability. In this study, the dyeing properties of AMD dyed with cationic dyes were investigated. The K/S values of AMD were 5~10% higher than these of general meta aramid fiber(AM) in the case of 1%owf caused by the lower crystallinity of AMD. The difference between K/S values of AMD and AM was increased as increasing dyeing concentration. The washing and rubbing fastness grade of AM and AMD were similar and good to very good.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.226-231
• /
• 2020

This study investigated effect of particle sizes of polymer binders for digital textile printing(DTP) pigment inks on touch of fabrics. The polymer binders were synthesized via miniemulsion polymerization of methyl methacrylate(MMA), butyl acrylate(BA), N-ethylolacrylamide(NEA) and methacrylic acid(MAA). The prepared binders were applied to black pigment inks and those black pigment inks were used to dye cotton fabrics. Then, color strength, rubbing fastness, stiffness, surface and bending properties of the dyed fabrics were investigated. Depending on the particle size of the polymer binder used, color strength, friction fastness, stiffness, surface and bending properties change. Generally, the larger the particle size of the polymer binder, the softer properties.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.325-331
• /
• 2010

The alkaline dissolution behavior of sea-island type ultrafine nylon fiber were dependent on the concentration of NaOH and treatment time, and the most appropriate condition for alkaline dissolution was to treat with 20g/l NaOH for 30 min at $80^{\circ}C$. The dyeing properties of sea-island type ultrafine nylon fiber and regular nylon fiber were examined with 3 different types of acid dyes in this study. The dye uptakes of ultrafine nylon fiber were higher than regular nylon fiber because of large surface area per unit mass, which increased as the dye bath pH decreased. The dyeing rates on ultrafine nylon fiber were faster and dye exhaustions were higher than regular nylon fiber, however color strength and rating of wash fastness were lower. It was also found that levelling type acid dye showed fast dyeing rate on both nylon fibers than metal-complex and milling type acid dyes.

• Asian Journal of Business Environment
• /
• 제14권1호
• /
• pp.15-22
• /
• 2024

Purpose: The development of natural batik dyes based on a combination of coconut fiber waste and avocado leaves using the extraction method is important to support the green economy and reduce chemical waste in Indonesia. Research design, data and methodology: The research explores the use of coconut fiber and avocado leaf waste extraction as a natural batik dye and conducts market testing to assess consumer satisfaction. Results: Indonesian batik exports are growing, but synthetic dye practices are causing a decline in demand. To address this, natural dyes are being explored, including coconut fiber waste and avocado leaf waste. Conclusion: Test results from washing at 40 degrees Celsius in terms of color changes and color staining, from sweat in terms of changes in acid color and changes in base color, to sunlight in terms of color fastness value, to heat to iron in terms of color change and color staining shows a value of 3-4 (quite good) and 4-5 (good), meaning that coconut fiber and avocado leaves waste can be used as natural batik dye.

• 한국의류학회지
• /
• 제33권2호
• /
• pp.256-265
• /
• 2009

The purpose of this study is to check color change, color fastness, increase wt., antibiosis, and UV-protection efficiency depending on gallnut concentrations and mordanting methods, when silk fabrics dye with gromwell according to pH. This results will contribute in developing of natural mordant with multi function. The results are as follows. ${\lambda}_{max}$ of Gallnut extracts was near 299 nm. When gallnut was used as a mordant, at all pH levels, pre-mordanted fabrics had red color and post-mordanted ones had red-purple color which was closed to natural color of gromwell. Brightness of post-mordanted fabrics was higher than that of pre-mordanted fabrics. In the case of chroma, pre-mordanted fabrics was higher than post-mordanted fabrics. There was no significant difference of color, brightness, and chroma depending on gallnut concentration. As mordanting concentration increased, fabric weight gradually went up and increase weight reached maximum $17{\sim}19%$. At all pH levels, color fastness improved by pre-mordanting and post-mordanting, and it showed the maximum $4{\sim}5$ grade of wet fastness and 5 grade of dry cleaning. Antibiosis of silk fabric was improved by gromwell dyeing and synthetic tannin mordanting. Antibiosis of gallnut extracts was excellent. The color fastness and antibiosis were preserved after 10 cycle dry cleaning. UV-protection efficiency was excellent by dyeing with gromwell and mordanting with gallnut.

• 한국의상디자인학회지
• /
• 제16권4호
• /
• pp.229-235
• /
• 2014

This study conducted a research on burn-out printing convergence technology for cellulose blend knit fabrics. Printing technology, which forms color pattern on the fabric, can be generally classified into four according to printer or printing method, e.g. screen printing, roller printing, rotary printing, digital printing. However, these printing methods are flat in design or pattern, which have limitation to overcome monotonousness of fabric, so that recently burn-out process method, which expresses three-dimensional pattern effect by treating chemical on the surface of fabric as the method to appeal its esthetics to the customers. Particularly, in case of cellulose/polyester composite material, first, it is proceeded in 2 processes, by dyeing cellulose or polyester fabric and burning out cellulose fabric, in this process, due to pollution caused by disperse dye migration, color of polyester fabric part could be discolored, which has high falt risk. This research considered coloring burn-out technique, which simultaneously proceed dyeing and burn-out by reducing dyeing and burn-out process to 1 stage, which were proceeded in 2 stages previously. As the research result, it was confirmed that reasonable depth of roller was 0.04~0.06mm in roller printing process, heat treatment condition of burn-out far-infrared radiation was $185^{\circ}C{\times}30m/min$. Color fastness to washing was confirmed to be 4-5 grade, color fastness to rubbing, 3-4 grade, color fastness to light, 4 grade. Also, it was confirmed that energy reduction effect appeared 38.19%, in case of energy cost per yard compared to the existing production, also, 19.74%, in case of production cost.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제39차 학술발표회
• /
• pp.35-36
• /
• 2008

A diblock copolymer($PEO_{45}$-MeDMA) derived from [2-(methacryloyloxy) ethyl] trimethylammonium chloride(MeDMA) was synthesized and applied to the meta-aramid fibers. Meta-aramid fabric was pretreated with $PEO_{45}$-MeDMA and successfully dyed with acid dyes. The dyeability of this fabric was investigated and found to depend on the $PEO_{45}$-MeDMA concentration, pH, and dye concentration. The color fastness properties of the copolymer pretreated dyed fabric was evaluated.

• 한국염색가공학회지
• /
• 제13권4호
• /
• pp.256-263
• /
• 2001

Polyester fabrics were irradiated by UV produced by the low pressure mercury lamp. UV irradiation broke a C-H bond of PET fiber and caused the carbonyl groups on the fiber surfaces. Surface modification of PET fibers were accelerated by pretreatment with methanol, ethanol and acetone. The irradiated PET was dyed with basic dyes having cationic groups. The dye uptakes were proportional to irradiation times, and in inversely proportional to irradiation distances. The tensile strengths of PET fabrics decreased by UV irradiation. Washing fastness of PET dyeings were good, about 4-5 grade,andlightfastnesswerepoor, about l grade.