• Journal of the Korean Graphic Arts Communication Society
• /
• v.7 no.1
• /
• pp.16-30
• /
• 1989

The anodixed aluminium film by sulfuric acid - method has many pores, the inner, called barrier layers, is active. They have strong absorption of dye. on be other, the absorption of dye is lost by Sealing, the surface is not dyed. We make IMAGE FORMATION on the film by the chemical behavior. This study made sure whether ion absorption is not in the barrier layer by IRRS and ESCA, considerated the mechanism of inage formation.

• Journal of the Korean Chemical Society
• /
• v.38 no.12
• /
• pp.857-863
• /
• 1994

The absorption and fluorescence spectroscopic studies on the interaction between thionine (TH) and sodium dodecyl sulfate (SDS) have been carried out. The absorption and fluorescence spectral changes of TH with the changes of concentration of SDS are interpreted in terms of i) the aggregation of TH-SDS complex, ii) the stacking process of dye molecules by the association of the TH-SDS complex, iii) breakdown of the stacking due to the formation of dye-rich induced micelles, iv) redistribution of dye molecules in the surface of SDS micelles.

• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.52-60
• /
• 2015

The present study aims to the use of carboxymenthyl cellulose (CMC) improving the ability of fiber in the dyeing process. Cellulose was extracted from banana leaves by NaOH and then modified by reacting with chloroacetic acid to obtain the carboxymenthyl cellulose. The effect of carboxymenthyl cellulose contents on the mechanical properties and dye absorption were also investigated. Then, CMC were blend with polypropylene (grade 561R) at 1%, 3% and 5% by weight ratio. The fibers were obtained from single screw extruder. The results show that the mechanical properties of the product decreased when increased the amount of CMC in the fiber product. After dyeing, the dye however were absorbed by the CMC-PP fibers more than the original PP fibers. The absorption of dye on the CMC-PP fibers increased significantly with the CMC ratio.

• Journal of Photoscience
• /
• v.7 no.1
• /
• pp.9-13
• /
• 2000

An alternately assembled polycation-anionic dye film was prepared on a precursor assembly of poly(allylamine)hydrochloride (PAH) and poly(sodium styrenesulfonate) (PSS) or of poly (djallyldimethyl)ammonium chloride (PDDA) and PSS. The (PAH/PSS) precursor assembly gave better adsorptivity to the anionic dye than the (PDDA/PSS) one. Four kinds of anionic dyes (EB-T, AR-17 AR-18, AR-27) with different numbers of sulfonate substituents were compared. The extent of dye assembling was higher for the dye with a smaller number of sufonate substituents. Second harmonic generation (SHG) was clearly observed from the films. The SHG signal and the absorption intensity correlated well up to four polycation/dye bilayers, while further assembly did not increase the SHG signal appreciably. Second order nonlinear coefficients for ten bilayer assemblies were the order of pm/V.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.175-182
• /
• 2016

To investigate dyeing behaviors in accordance with dye structure in cold pad batch dyeing of cotton knit, monochlorotriazine-vinylsulfone bifunctional dyes and monofluorotriazine-vinylsulfone bifunctional dyes were prepared. The spectral property and solubility of the dyes were tested and compared with the imported dyes. In addition, exhaustion behaviors of individual and mixed dye solutions were measured to examine the influence of dye structure on dyeing behavior in cold pad batch dyeing. The substantivity, fixation, migration index and half dyeing time were also calculated for further analysis of dyeing behavior of the prepared dyes. As a result, both dyes exhibited the superior solubilities and satisfactory light absorption properties. Also, monofluorotriazine-vinylsulfone bifunctional dyes showed moderate sensitivity to alkalinity and proper kinetic index values compared with the monochlorotriazine-vinylsulfone bifunctional dyes and the imported dyes. The results indicated monofluorotriazine-vinylsulfone bifunctional structure of the dye is suitable for cold pad batch dyeing.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1100-1101
• /
• 2015

In this work, the effect of addition of acetylacetone on microstructure and quality of nanoporous $TiO_2$ photo-electrodes was studied in dye-sensitized solar cells (DSCs) and structure and electrical properties of fabricated cells were investigated. From the results, the DSCs fabricated with acetyl acetone showed highest photovoltaic performances. This behavior may be attributed to paste agglomeration decrease and interconnection and bonding improvement between $TiO_2$ particles. Furthermore, the most favorable dye absorption time results to be 10h: exceeding this time a decrease in efficiency is observed despite the increasing amount of dye absorption. The $TiO_2$ photo-electrode prepared under the conditions of acetylacetone ratio of 15% and dye absorption time of 10hr showed the better photovoltaic performance ($J_{sc}=12.48mA/cm^2$, $V_{oc}=0.69V$, ff=0.68, ${\eta}=5.86%$).

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3272-3278
• /
• 2010

Synthesis and structural characterization of peripherally ferrocene-substituted zinc phthalocyanine (ZnPc-Fc) were carried out for efficient far-red/near-IR performance in dye-sensitized nanostructured $TiO_2$ solar cells. Incorporating ferrocene into phthalocyanine strongly improved the dye solubility in polar organic solvents, and reduced surface aggregation due to the steric effect of bulky ferrocene substituents. The involvement of electron transfer reaction pathways between ferrocene and phthalocyanine in ZnPc-Fc was evidenced by completely quenched fluorescence from S1 state (< 0.08% vs ZnPc). Strong absorption bands at 542 and 682 nm were observed in the transient absorption spectroscopy of ZnPc-Fc in DMSO, which was excited at a 670 nm laser pulse with a 15 ps full width at half maximum. Also, the excited state absorption signals at 450 - 600 and 750 - 850 nm appeared from the formation of charge separated state of phthalocyanine's anion. The lifetime of the charge separate state in ZnPc-Fc was determined to be $170{\pm}8$ ps, which was almost 17 times shorter than that of the ZnPc.

• Textile Coloration and Finishing
• /
• v.11 no.3
• /
• pp.1-8
• /
• 1999

Polyester ultrarmcrofiber(UMF, fiber fineness : 0.05d) and the other three kinds of polyester fibers(0.52, 1.04 and 2.08d) were dyed with two disperse dyes, C.1. Disperse Red 60 and Blue 56. Dyeing rates and absorption isotherms of these dyes have been measured at 100, 115 and $130^\circ{C}$ in water system. The dye bath was maintained at pH 5.0 with acetic acid(0.1mo1/1) /sodium acetate(0.1mo1/1) buffers and a liquor ratio of 1000：1. The absorption isotherms from two disperse dyes are nearly linear up to the saturation values, which increase with the temperature of dyeing. Dye uptake decreased with the fiber fineness in lower temperature $100^\circ{C})$, whereas increased in higher temperature$(130^\circ{C})$. A comparatively greater quantity of dye is necessary to dye ultrarmcrofiber fabrics than conventional fabrics. Disperse Blue 56 having a good build-up property is agreed to Fothergill's equation, which is inversely varied with the fiber fineness by the quantity of dye necessary to obtain a given shade.

• The Journal of Information Technology
• /
• v.8 no.3
• /
• pp.51-56
• /
• 2005

In this paper, we describe a study on the relationship between spectral sensitization and photographic characteristics of color paper. The photographic emulsion used in this study is a green-sensitizing emulsion. U.V maximum absorption peak value of 9-phenyl-5,5'-diphenyl-3,3'-bis(3-sulfopropyl)benzoxazolo carbocyanine triethyl ammonium salt was observed 507nm, and wedge spectrograms maximum peak value of color paper added dye to photographic emulsion was shown 553nm. As compared with the absorption peak of the dye in methanol solution, the sensitizing peaks of 9-phenyl-5,5'-diphenyl-3,3'-bis(3-sulfopropyl)benzoxazolo carbocyanine triethyl ammonium salt have red shifts of 46nm. The photographic characteristics of green-sensitizing emulsion were obtained contrast(2.6), speed(48-57), fog(0.08). Therefore, benzoxazolo carbocyanine dye is of industrial importance as green-sensitizing dye in the spectral sensitization of photographic emulsion.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.169-181
• /
• 2021

Five dyes based on phthalocyanine, a dye on azo, and a dye on anhraquinone were prepared from corresponding starting material to investigate the effects of substituent on thermal-stability of dyes which is essentially required to apply to the color filters. Synthesized dyes were confirmed their chemical structure using by 1H-NMR, MASS and Elemental analysis. The thermal-stability was evaluated by the weight reductions measured by TGA analysis comparing to that of conventional C.I. Pigment Blue 15:6. The absorption maxima were measured by UV-VIS spectrophotometer then the effects of substituent on absorption maximum was also investigated.