• 한국통신학회논문지
• /
• 제27권8C호
• /
• pp.812-818
• /
• 2002

반도체 기술과 멀티기디어 통신기술이 발달하면서 고품위의 영상과 다중 채널의 오디오에 관심을 갖게되었다. 특히 DVD 시장의 급성장으로 인하여 고품질의 영상 및 오디오 필요성이 중요한 기술로 대두되었다. MPEG-Audio 표준안은 어떠한 비트율도 지원한다. 본 논문에서는 MPEG-Audio의 핵심부분인 필터부분을 DALUT (Distributed Arithmetic Look-Up Table)방식을 사용하여 FPGA(Field Programmable Gate Array)에 구현하였다. 고속 필터를 설계하기 위해서 승산기 대신에 DALUT를 사용하였으며 최소 10㎒에서 최대 30㎒ 사이에서 동작한다. 본 논문의 설계는 모두 VHDL로 구현하였으며, 알고리즘 검증은 C언어를 사용하였다. VHDL의 시뮬레이션은 ALDEC사의 Active-HDL5.1과 Synopsys사의 vhdlsim을 사용하였고, 합성은 Synopsys사의 design-analyzer를 사용하였다. 타겟 라이브러리는 XILINX사의 XC4010E, XC4020EX, XC4052XL을 사용하였으며, P＆R 툴은 XACT Ml.4를 사용하였다.

• 한국통신학회논문지
• /
• 제31권7C호
• /
• pp.659-664
• /
• 2006

본 논문에서는 고밀도 광 기록 저장 시스템을 위하여 두 가지 새로운 에러 정정 알고리즘을 제안하였다. 첫 번째 알고리즘(New Code IV)는 랜덤 에러에 대한 민감성을 감소시켜서 잘못된 이레이져 선언을 줄이고 코드율을 증가시켰다. 두 번째 알고리즘(New Code V)는 이레이져 선언을 위한 정보 데이터와 독립적인 Indicator flag(IF)를 사용하였다. 실험 결과 제안한 두 포맷은 기존 코드와 비교해 비슷한 코드율로 다양한 에러 분포 환경에서 보다 우수한 에러 정정 능력을 가진다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.289-289
• /
• 2010

Translation Characteristics of Digital Decoder utilizing the analog parallel processing circuit technology is designed. The fast parallel viterbi decoder system acted by a replacement of the conventional digital viterbi Decoder has good propagation. we are applied proposed analog viterbi decoder to decode PR signal for DVD and analyze the specific circuit and signal characteristics.

• 한국해양공학회지
• /
• 제16권6호
• /
• pp.65-70
• /
• 2002

This paper presents a mechanical design of the deepwater pipeline wall thickness using the recent design rules. Characteristics and limitations of the new codes were identified through a case study design in the Gulf of Mexico. In addition to the ASME, API, and DVD codes, the code of federal regulations (CFR) was also utilized in the design. It was found that conservatism still exists within the collapse prediction for water depth greater than 1500m. Comparision of the results from DNV and API codes were presented.

• 대한기계학회논문집A
• /
• 제32권2호
• /
• pp.135-142
• /
• 2008

Experimental studies on the aerodynamic coupling effect on natural frequencies, critical speed and flutter instability of rotating disks are investigated in this paper. The theoretical analysis uses a fluid-structure model where the aerodynamic effects are represented in terms of elastic, lift and damping and stiffness components. The experiments performed using a vacuum chamber and ASMO/DVD disks rotating in vacuum, open and enclosure in several gaps with stationary wall give three main results. One is that the aerodynamic effect by the surrounding air reduces the natural frequencies and critical speeds of the vibration modes. The second is that natural frequency of disks rotating in open air is larger than that in enclosure. Finally, it is shown that the disk vibration is reduced as the gap between the disk and the rigid wall decreases.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2513-2519
• /
• 2000

Free vibration characteristics of an initially stressed CD/DVD disk, which is designed for increasing critical speeds of current optical disks, are analyzed using the Rayleigh-Ritz technique based on variational formulations. Natural frequencies of the new disk depend on membrane stresses caused by disk rotation as well as residual stresses imposed during the cooling process of the injection molding. Critical speeds are calculated for the various initial patterns of radial and circumferential stresses. Initially imposed tensile stresses increase the natural frequencies of all the vibration modes except zero nodal diameter mode, whose natural frequency is independent of circumferential stress. A new disk with initial tensile stress of 0.5MPa is shown to have its critical speed about 30 % higher than the current optical disk.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.397.2-397
• /
• 2002

There are 4 servo systems in a DVD drive such as a focus servo system, a tracking servo system, a sled servo system and a spindle servo system. Focus servo system maintains relative distance between lens and disk. In this paper, two plant models for the focus servo system will be presented. One of them is newly developed and the other is conventional. Focus error signal between lens and disk is detected using LDV 2 beam method. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.360.1-360
• /
• 2002

Current information storage devices, such as HDD, CD/DVD-ROM/RW, probe-based memory and cabon nano tubes, are compared with biological information storage mechanisms in DNA and brain memory. Various biological components in living cells are analyzed based on "irreducible complexity" of intelligent design concept. Linear and arel density of information stored in the biological and mechanical storages are compared for the applications and developments of new storage devices.

• 한국소음진동공학회논문집
• /
• 제15권10호
• /
• pp.1169-1176
• /
• 2005

In this study, experimental tests for driving noise of various optical disk drives (ODD) have been performed using 1/2' microphone noise measurement system. Several new and old ODD models by different manufacturers are practically considered and compared for realistic driving conditions. Sound insulation case with absorbing material for the present experimental tests is designed and constructed using CATIA system. It is found that average data transfer rate, operating RPM, and sound noise level seem to be different for the ODD models with same denoted speed by different manufacturers. Moreover, driving sound noise level can be largely affected by both tray shape and driving speed even for the condition of the same apparent data transfer rate.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.496-503
• /
• 2001

The suspension of the optical pickup actuator is damped by the presence of silicone rubber damper bond at its termination. In spite of the presence of it, the actuator still exhibits a strong mechanical resonance which affects its settling time and vibrational characteristics. This resonance can cause errors in reading information from the disk, particularly in high speed CD-ROM and DVD-ROM drives. Ferrofluids are stable colloidal suspensions of sub-micron sized magnetic particles in a carrier liquid. In the actuator design, ferrofluid is applied to the surface of the magnets until the quantity is sufficient to maintain intimate contact with the bobbin/carrier assembly. The fluid is retained in the magnetic field and its viscosity provides the desired mechanical damping to the moving assembly, improving the actuators settling time and vibrational characteristics. Access time is also improved, particularly on warped or eccentric discs.