• International Commerce and Information Review
• /
• v.14 no.3
• /
• pp.253-280
• /
• 2012

Since China reformed and opened up itself, processing trade system has enormously contributed to chinese economic development and also become driving force of chinese economic growth. However, due to imbalance of industrial distribution, overproduction of labor-intensive product has expanded, and as a result, mass export of low-value-added products has aggravated trade friction. Also, these low-value-added products has caused environmental pollution and brought resource waste. On this, Chinese government start to modify system according to strategy for enhancement of processing trade. In this study, as a countermeasure of the Change of Chinese processing trade system, applicability of the bonded area is suggested. Firstly, even if a company's item is applied to prohibited or restricted items, the company can trade if through the bonded area. Secondly, even if a company has duty of deposit reservation, the company can be exempt from duty of deposit reservation if through the bonded area. Thirdly, as to importing facilities for processing trade, a company can receive more benefit through the bonded area than through outside of the bonded area.

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.403-412
• /
• 2012

Purpose: This study is conducted to evaluate the job stressors for dental technicians in Ulsan city. Methods: The Korean standard job stressors assessment tool developed by Korea Occupational Safety and Health Agency (KOSHA) was used to compare the survey result with Korean reference value. The questionnaire on the social, demographic and job characteristics of dental technicians was also used to find the factors affecting to job stressors by using multiple linear regression analysis. Results: A total of 155 questionnaire was collected from 2010 to 2011. Among the eight fields of stressors, the physical environment (men 50.0, women; 58.3) and job demands (men 57.1, women 57.1) were higher than the median value of the Korean Workers. By multiple linear regression analysis, the significant factors to the physical environment were the satisfaction degree of indoor odor, number of employee, duty and working hours. In terms of the job demand, duty, working hours, age, and the satisfaction to the efficiency of space utilization were significantly associated to the score of job demand. Conclusion: Based on these results, it is necessary to manage appropriate workload, control indoor odor and design an efficient work space for prevention of job stress of dental technicians.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.88-91
• /
• 2010

In this paper, We are composed the position recognition and speed control using the moving robot in the shield Room with a RF Module and Ultrasonic Sensors. Double look up tables are selected a reference value/duty ratio. The moving robot with the dual fuzzy rules which can decrease a Conversion time than basic fuzzy control rules at start point and curve region. Also, a changing times of double look up table are rise at specific points b1,c1,d1 in the e-${\Delta}e$ phase plane and the one of the look up table is used which for increase rising time at transition area, the other used for rapidly conversion to the reference value. We verified that a dual fuzzy control rules get the good response compare with the basic fuzzy control rule.

• The Korean Journal of Financial Management
• /
• v.1 no.1
• /
• pp.1-27
• /
• 1985

One of the most important research works in modern business enterpise is the relation between the purpose of business enterprise and decision making behavior of manager. It is because the coincidence of the former and the latter is considered an ideal type in evaluating the result of business management. Here I have set up assumptions in order to solve the above statements: (1) What purpose does the modern business enterprise set up and what kind of economic background does it have? (2) What is the theory of maximization of stock value among the purposes of business enterprise? (3) What kind of decision making do we do in the maximization of stock value in busiess administration? (4) How is the behavior of business financial manager's intention and decision made? The result pursued under the above assumptions shows that business manager's behavior of decision making is affected according to the degree that he gets some information, but basically is determined in consideration of his autonomous standpoint, namely the stability of business enterprise and the stability of manager himself while he faithfully performs his duty which is entrusted by stockholders. Therefore we come to the conclusion that there is a little gap between a manager's behavior of decision-making and the purpose of stock value maximization.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.3
• /
• pp.205-212
• /
• 2012

This paper proposes the fuzzy logic based variable step-size MPPT (Maximum Power Point Tracking) method for the stability at the steady state and the improvement of the transient response in the wind power system. If the change value of duty ratio is set on stability of the steady state, MPPT control traces to maximum power point slowly. And if the change value is set on improvement of the transient response, the system output oscillates at the maximum power point. By adjusting the step size with fuzzy logic, it can be improved the MPPT response speed and stability at steady state when MPPT control is performed to track the maximum power point. The effectiveness of the proposed method has been verified by simulations and experimental results.

• Journal of Biomedical Engineering Research
• /
• v.17 no.3
• /
• pp.373-378
• /
• 1996

In this paper, we calculated chronaxy value in order to determine the optimal conditions and stimulus pulse of information transmission. We also developed an electrical equivalent circuit of the hand including the contact part, which consists of two resistors (a contact resistor and finger resistor) and a capacitor. The minimum recoulition voltage was measured by using electrical stimulus. We found that the ranges of the above two resistances and the capacitance are 30-130k$\Omega$, 20-60k$\Omega$ and 10-30nF respectively. We found that the minimum recoulition voltage was the lowest at 100-300Hz and 10% of the duty ratio.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.1
• /
• pp.66-71
• /
• 2016

In this study, electrical and spectroscopic characteristics were investigated in the pin to plate discharge of 0.9% weight per unit volume saline solution. The positive and positive- and negative-going dc pulse with 5% duty ratio were applied to tungsten pin electrode. The more amount of discharge current flew in negative discharge. The temperature, which is considered as a local value in the vicinity of vapor of discharge, was about 3,000K which is much higher than the value recommended to be controlled. It can be suggested that not only the temperature of liquid but also the local temperature of vapor is monitored to investigate damages on tissue or cells in biological application.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.797-799
• /
• 1993

In this paper, we propose a new PWM control method of cycloconverter with a resonant circuit for induction heating. The proposed new PWM control method determines the switching duty ratio compared the integrated value of load current with the reference value of input current on sampling interval. By the Proposed method, the displacement factor becomes 1.0 and the input current waveforms become sinusoid which is nearly 1.0 in terms of the input power factor. To confirm the validity of the proposed method, the simulations and experiments are carried out.

• The Korean Society of Law and Medicine
• /
• v.18 no.2
• /
• pp.105-138
• /
• 2017

This is case comments of several representative legal cases regarding self- determination right of patient. In a case in which an intoxicated patient attempted suicide refusing treatment, the Supreme Court ruled that the medical team's respect for the patient's decision was an act of malpractice, and that in particular medical situations (medical emergencies) the physician's duty to preserve life supersedes the patient's rights to autonomy. Afterwards, at the request of the patient's family, and considering the patient's condition (irrecoverable death stage, etc.) consistent with a persistent vegetative state, the Supreme Court deduced the patient's intention and decide to withdraw life-sustaining treatment. More recently, regarding patients who refuse blood transfusions or other necessary treatment due to religious beliefs, the Supreme Court established a standard of judgment that can be seen as conferring equal value to the physician's duty to respect patient autonomy and to preserve life. An empirical study of legal precedent with regard to cases in which the physician's duty to preserve life conflicts with the patient's autonomy, grounded in respect for human dignity, can reveal how the Court's perspective has reflected the role of the patient as a decision-making subject and ways of respecting autonomy in Korean society, and how the Court's stance has changed alongside changing societal beliefs. The Court has shifted from judging the right to life as the foremost value and prioritizing this over the patient's autonomy, to beginning to at least consider the patient's formally stated or deducible wishes when withholding or withdrawing treatment, and to considering exercises of self determination right based on religious belief or certain other justifications with informed refusal. This will have a substantial impact on medical community going forward, and provide implicit and explicit guidance for physicians who are practicing medicine within this environment.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.2
• /
• pp.172-179
• /
• 2020

The impact of effective parameters on the electrodeposition rate optimization of Au-Cu alloy at high thicknesses on the silver substrate was investigated in the present study. After ensuring the formation of gold alloy deposits with the desired and standard percentage of gold with the cartage of 18K and other standard karats that should be observed in the manufacturing of the gold and jewelry artifacts, comparing the rate of gold-copper deposition by direct and pulsed current was done. The rate of deposition with pulse current was significantly higher than direct current. In this process, the duty cycle parameter was effectively optimized by the "one factor at a time" method to achieve maximum deposition rate. Particular parameters in this work were direct and pulse current densities, bath temperature, concentration of gold and cyanide ions in electrolyte, pH, agitation and wetting agent additive. Scanning electron microscopy (SEM) and surface chemical analysis system (EDS) were used to study the effect of deposition on the cross-sections of the formed layers. The results revealed that the Au-Cu alloy layer formed with concentrations of 6gr·L^-1 Au, 55gr·L^-1 Cu, 24 gr·L^-1 KCN and 1 ml·L^-1 Lauryl dimethyl amine oxide (LDAO) in the 0.6 mA·cm^-2 average current density and 30% duty cycle, had 0.841 ㎛·min^-1 Which was the highest deposition rate. The use of electrodeposition of pure and alloy gold thick layers as a production method can reduce the use of gold metal in the production of hallow gold artifacts, create sophisticated and unique models, and diversify production by maintaining standard karats, hardness, thickness and mechanical strength. This will not only make the process economical, it will also provide significant added value to the gold artifacts. By pulsating of currents and increasing the duty cycle means reducing the pulse off-time, and if the pulse off-time becomes too short, the electric double layer would not have sufficient growth time, and its thickness decreases. These results show the effect of pulsed current on increasing the electrodeposition rate of Au-Cu alloy confirming the previous studies on the effect of pulsed current on increasing the deposition rate of Au-Cu alloy.