• Proceedings of the KOSOMBE Conference
• /
• v.1992 no.05
• /
• pp.198-202
• /
• 1992

In this paper, we have performed an experiment to obtain an optimized electric stimulation condition on the tip or a ringer skin. The desired parameters for stimulation of the finger tip skin are waveforms, frequency, stimulation intensity, duty cycle. As a result, when the finger skin was stimulated with monophasic, biphasic, and differntial phasic, the most appropriate condition was 200 to 250[Hz] in frequency, 10 to 25[%] in duty cycle. Burst type pulse was more sensitive effect than that of continuous pulse methode.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.257-260
• /
• 2002

In this paper, the circuit of AC Choppers for $CO_2$laser Power Supply are proposed and investigated. IGBT-controlled ac voltage regulators, operating at high frequency chopping mode. Chopping-to-supply duty ratio plays an important role in terms of laser output. Laser input energy is varied by controlling the leakage transfomer used with the proposed system. This improved circuit employs a 3 electrode-type and Ring Blower. This improved circuit system has many advantages compared with the conventional SMPS such as simple design requirment, easy implementation, high reliability, low switching loss, and consequently high efficiency. As a result, the maximun output was 16W at duty-ratio of 92%, total gas mixture of $CO_2$: $N_2$: He = 1 : 9 : 15, total pressure of 15torr.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.779-782
• /
• 1998

This paper describes a high-speed Dual-modulus Prescaler (DMP) for RF mobile communication systems with pulse remover using selective latch technique. This circuit achieves high speed and low power consumption by reducing full speed flip-flops and using a selective latch. The proposed DMP consists of only one full speed flip-flop, a selective latch, conventional flip-flops, and a control gate. In order to ensure the timing of control signal, duty cycle problem and propagation delay must be considered. The failling edgetriggered flip-flops alleviate the duty cycle problem andthis paper shows that the propagation delay of control signal doesn't matter. The maximum operating frequency of the proposed DMP with 0.6um CMOS technology is up to 2.2㎓ at 3.3V power supply and the circuit consumes 5.24mA.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.242-247
• /
• 2009

In this paper, we investigate interference between short-range radiocommunication devices (SRDs) with frequency hopping spread spectrum (FHSS) and direct sequence spread spectrum (DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-Carlo (MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate (BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than bandwidth does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.218-227
• /
• 2011

The subject of variable step size maximum power point tracking (MPPT) algorithms has been addressed in the literature. However, most of the addressed algorithms tune the variable step size according to two variables: the photovoltaic (PV) array voltage ($V_{PV}$) and the PV array current ($I_{PV}$). Therefore, both the PV array current and voltage have to be measured. Recently, maximum power point trackers that arc based on a single variable ($I_{PV}$ or $V_{PV}$) have received a great deal of attention due to their simplicity and ease of implementation, when compared to other tracking techniques. In this paper, two methods have been proposed to design a variable step size MPPT algorithm using only a single current sensor for stand-alone battery storage PV systems. These methods utilize only the relationship between the PV array measured current and the converter duty cycle (D) to automatically adapt the step change in the duty cycle to reach the maximum power point (MPP) of the PV array. Detailed analyses and flowcharts of the proposed methods are included. Moreover, a comparison has been made between the proposed methods to investigate their performance in the transient and steady states. Finally, experimental results with field programmable gate arrays (FPGAs) are presented to verify the performance of the proposed methods.

• International Commerce and Information Review
• /
• v.11 no.1
• /
• pp.27-43
• /
• 2009

This article explored the customers protection regulations in electronic payment system by Article 4A of the UCC and EFTA of 1978 and by Electronic Financial Transaction Act of Korea. Both Korea and America have various regulations to protect concerned parties(customers). For examples, the errors of payment order, money-back guarantee, and unauthorized payment order etc. First, this Article focuses on the allocation of risk of loss caused by ambiguous term in payment orders that do not express the subjective intention of the senders. Second, most rights and obligations created by Article 4A of America can be varied with the agreement of affected parties. But there are some exceptions. The exceptions include the money-back guarantee. So Receiving bank have to pay to originator the ordered money included interest. However, Korea also has money-back guarantee but bank do not pay interest to sender. Lastly, Electronic Funds Transfer Act of 1978 and Regulation E has US$ 50 regulation in order to protect customers on the unauthorized payment order. Article 4A imposes duty to detect unauthorized payment orders to originator in relation to the establishment of commercially reasonable security procedure, while Korean law imposes the duty to notify the bank in order to decrease the loss resulted from unauthorized payment order.

• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.32-37
• /
• 2011

In dispersion management (DM) and optical phase conjugation applied into optical transmission links with multi fiber spans for minimizing the impact of nonlinearity and group velocity (GVD), implementation possibility of DM using only one fiber span for pre- or postcompensation was assessed as a function of duty cycle of RZ pulse and residual dispersion per span (RDPS). It is confirmed that DM with optimal net residual dispersion (NRD) controlled by only one fiber span could be sufficiently applied into optical transmission links, though optimal NRD is more increased than that in transmission links with the general DM scheme of pre- and postcompensation. Thus, it is expected that optical transmission system is simply designed and implemented by applying the proposed DM scheme into real optical transmission links. Also, it is confirmed that the advantageous duty cycle of RZ is 0.5 and RDPS is setting to be small value for the effective transmitting wide signal wavelength range in optical links with optimal NRD controlled by only one fiber span.

• The Journal of Information Technology
• /
• v.4 no.2
• /
• pp.103-115
• /
• 2001

This paper seek to clarify a narrow set of policy issues relating to the international trade aspects of electronic commerce. It focuses, in particular, on the WTO decision not impose customs duties on electronically delivered products. The decision on duty-free commerce is intended to contribute to the growth of electronic commerce by providing a guarantee of open trading conditions, but the significance of the decision may have been exaggerated. In particular, the prohibition of customs duties does not ensure continued open market access for electronically delivered products and may even prompt recourse to inferior instruments of protection. Accordingly, barrier-free electronic commerce would be more effectively secured by deepening and widening the limited cross-border trade commitments under the GATS and by clarifying and strengthening certain GATS disciplines.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.685-688
• /
• 2015

A phase-shift full-bridge converter is widely used conventional converter. If the input power change in the variation of the output voltage, there is a time interval freewheeling according to a duty change. This is a factor of reducing the efficiency. In this paper, we propose a method for improving the efficiency of the converter/inverter systems that require high efficiency in the ESS. The proposed method was used for the duty control for solving the fail problem ZVS(Zero Voltage Switching) in Freewheeling interval. The proposed method was verified by experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.12
• /
• pp.873-875
• /
• 2014

In this paper we describe an asynchronous MAC protocol with receiver-initiated duty cycling for energy-efficiency in wireless sensor networks(WSN). Legacy asynchronous MAC protocols, X-MAC and PW-MAC, has weaknesses which generates too many control packets and has data collision problem between multiple transmitters, respectively. Therefore, we propose a receiver-initiated asynchronous MAC protocol which generates control packets from transmitter to complement these disadvantages. Compared to the prior asynchronous duty cycling approaches of X-MAC and PW-MAC, the proposed protocol shows a improvement in energy-efficiency, throughput and latency from simulation results.