• International Journal of Automotive Technology
• /
• v.2 no.3
• /
• pp.93-101
• /
• 2001

Distribution of fuel-air mixture has a strong influence on performance and emissions of a compressed natural gas (CNG) engine. In this paper, parametric study is performed by KIVA-3V to investigate fuel-air mixture with respect to injection timing, cycle equivalence ratio and engine speed. With open-valve injection intensive mixing during intake and compression stroke results in relatively homogeneous mixture in the cylinder. Sequential induction of fuel-air mixture and fresh air results in stratification in the cylinder among the test cases at closed-valve injection. There is close similarity in the calculated distributions of the mixture in the cylinder with different cycle equivalence ratios and engine speeds. The results are compared against pressure traces and flame images obtained in a single cylinder engine converted from a 11L six-cylinder heavy duty diesel engine.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.5
• /
• pp.714-723
• /
• 2012

A new Z-source inverter (ZSI) topology is developed to improve voltage boost ability. The proposed topology is modified from the switched inductor topology by adding some more inductors and diodes into inductor branch to the conventional Z-source network. The modulation methods developed for the conventional ZSI can be easily utilized in the proposed ZSI. The proposed ZSI has an ability to obtain a higher voltage boost ratio compared with the conventional ZSI under the same shoot-through duty ratio. Since a smaller shoot-through duty ratio is required for high voltage boost, the proposed ZSI is able to reduce the voltage stress on Z-source capacitor and inverter-bridge. Theoretical analysis and operating principle of the proposed topology are explicitly described. In addition, the design guideline of the proposed Z-source network as well as the PWM control method to achieve the desired voltage boost factor is also analyzed in detail. The improved performances are validated by both simulation and experiment.

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.89-94
• /
• 2016

This paper is to investigate how each cases(recurrent cases) is to be classified and what each parties should prepare to solve their cases by civil law system and so on. We could find the increased volume (or quantity) of transportation by air recently and have to worry about the sky-rocketed cases of unfulfilled navigation management(aviation service) proportionately inevitably. So we knew that some cases of disputes are solved by unreasonable demand, unilateral concession or irrational decision without any logical or legal criterion, because both sides(passenger and carrier) do not recognize the situation correctly and have any preparation for the legal settlement. Therefore we should prepare the classification work and comprehend about the legal effect(fulfillment retardation of duty, fulfillment impossibility of duty and imperfect fulfillment in our civil law system) of each cases. We can grasp the legal relationship with a carrier and a passengers by the legal analysis more efficiently and save (or help) energy and time of concerned parties.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.11
• /
• pp.2980-2991
• /
• 2012

Since wireless sensor networks are broadly used in various areas, there have been a number of protocols developed to satisfy specific constraints of each application. The most important and common requirements regardless of application types are to provide a long network lifetime and small end-to-end delay. In this paper, we propose Early Preamble MAC (EP-MAC) with improved energy conservation and low latency. It is based on CMAC but adopts a new preamble type called 'early preamble'. In EP-MAC, a transmitting node can find quickly when a next receiving node wakes up, so EP-MAC enables direct data forwarding in the next phase. From numerical analysis, we show that EP-MAC improves energy consumption and latency greatly compared to CMAC. We also implemented EP-MAC with NS-2, and through extensive simulation, we confirmed that EP-MAC outperforms CMAC.

• 한국연소학회:학술대회논문집
• /
• 2001.11a
• /
• pp.185-192
• /
• 2001

In this study the characteristics of E-EGR valve developed by UNICK were analyzed and the feasibility of application to vehicles were evaluated. Smart car(3L/100km, cdi version) and engine which is small-displacement size, 0.8-liter, of diesel passenger car developed from Mercedes-Benz were used for this experiment. It was installed a 3-cylinder turbo-charged light duty diesel engine with an electronic EGR valve. After the analysis and comparison of E-EGR valve performance under test benchs, the estimation of vehicle application was executed through the EGR map and CVS-75 test result measured on the chassis dynamometer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.865-870
• /
• 2008

The effects of exhaust gas recirculation (ECR) on smoke emissions in heavy duty diesel engine are numerically studied by using KIVA-3V CFD code. For the analysis, RNG k-$\varepsilon$ turbulence model was given as a governing equation, and mathematical models of Tab, Wave, Watkins-Park, Nagle-Strikland were applied to describe physical process of droplet breakup, atomization, wall impingement and smoke respectively.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.79-82
• /
• 2003

The switching-mode power converter has been widely used because of its features of high efficiency and small weight and size. In the switching-mode power converter, the output voltage is generally controlled by varying the duty ratio of main switch. When a converter operates in steady state, duty ratio of the converter is kept constant. So the power of switching noise is concentrated in specific frequencies. The more white noise is injected, the more conducted EMI is reduced. But output-voltage is not sufficiently regulated. This is the reason why carrier frequency selection topology is proposed. In the case of carrier frequency selection, output-voltage of steady state and transient state is fully regulated. Spectrum analysis is performed on the Phase current and the CM noise voltage. The former is measured with Current Probe and the latter is achieved with LISN, which are connected to the spectrum analyzer respectively.

• International Journal of Advanced Culture Technology
• /
• v.6 no.3
• /
• pp.105-116
• /
• 2018

As an international company in the automotive industry for years, Sichuan Hyundai has encountered serious difficulties since its entering into China. With huge investment and great ambition to conquer the China commercial vehicle market, successive setbacks have put the company in jeopardy. Design thinking, emphasizing "user-driven innovation" can help to look for effective and possible solutions from a very strong and effective perspective. This thesis first provides a comprehensive look of the economic background of China in order to get a overall understanding of the market. Then the paper did an analysis of Sichuan Hyundai from the perspective of design thinking. By identifying the reliability bias of Sichuan Hyundai, key problems such as the product, advertisement and cultural communication were discussed. With a emphasis on the intuitive thinking, the paper provides some feasible solutions and also implications for the future development.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.10a
• /
• pp.21-24
• /
• 2000

Traction motors driven by several type inverters have been subjected to increasing demands for higher operating temperature, more demands for duty cycles, higher starting current, frequent voltage transients and finally severe environmental exposure. For applications to inverter duty, traction motors needs a special insulation system, which has characteristics of increased bond strength, lower operating temperature and higher turn-to-tum insulation. Also it needs major contributors to insulation life and reliability of motors, which more considered by temperature, voltage, frequency, rise time, pulse configuration, wire thickness and insulation materials. In this paper, to evaluate of reliability and expected life, it is analyzed the several stresses and their degradation mechanism on insulation system of AC traction motor.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.188-192
• /
• 2000

This paper presents a novel prototype of soft-switching PWM Full-bridge converter which incorporates active power switches in series with each rectifier diode in transformer secondary side. Switching and conduction losses of all the switches and devices are reduced as well as commutating current and circulating current flowing through transformer as compared with conventional converter. And duty ratio of primary switches is constant for maximum voltage conversion ratio. But this converter can be varied output by duty ratio of secondary switches. Operation principles basically the same as that of the PWM Full-bridge converter published previously. The operating characteristics of this converter are illustrate and discussed including the simulated analysis.