• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.213-216
• /
• 2003

A voltage sag is a short-duration reduction in rms voltage, and utilities have been faced with rising numbers of complaints about the quality of power due to voltage sags. In this paper, vulnerable areas of voltage sag are determined using representative loads at the buses. The CBEMA curves of the representative loads are used to determine whether the bus is vulnerable or not. Also, the ares are displayed with geographical information in order to help operators understand the situation going on easily. The proposed simulator is applied to Jeju power system to show its capabilities.

• MALSORI
• /
• no.35_36
• /
• pp.157-173
• /
• 1998

This is a pilot study on applying the Rise/Fall/connection(RFC) model to Korean intonation tot speech synthesis. RFC model contains successive intonation events, which can be pitch accents and intonation boundary tones. The intonation contour of RFC model is composed of piecewise linear curves of rise, fall, and connection elements, and each element can have any amplitude and duration. In this paper, elements of RFC model is slightly modified to accommodate the characteristics of Korean intonation. Subjective preference test was conducted to compare the modified RFC model with the original one. The results show that the intonation contour produced by the modified RFC model is perceptually indistinguishable from that of the original RFC model, while the former requires less number of labels than the latter.

• Journal of the Optical Society of Korea
• /
• v.19 no.3
• /
• pp.277-283
• /
• 2015

In this study, we evaluated the muscle tension in hemiplegia patients using a real-time monitoring system combined with high-intensity laser treatment (HILT) device. Five hemiplegia patients were treated with HILT in the left forearm muscle for 8 minutes, and the muscle was relaxed for 8 minutes following the treatment. Both the gradient of the force-displacement curves and the muscle hardness decreased during the therapy, and the effects were maintained following the treatment. The results show that muscle tension decreased rapidly during laser irradiation, and the efficacy of the treatment depended on the duration of the illness. Consequently, we conclude that this combined HILT and real-time muscle tension monitoring system is useful for evaluating the therapeutic procedure and for treatment of muscle pain.

• Advances in nano research
• /
• v.14 no.6
• /
• pp.527-539
• /
• 2023

Measuring energy burn during intensive combat sport has been a challenging concerns for a long time. In the present article, the energy consumption during combat sports is measured by use of wearable GoBe2 equipped with nanotechnology measuring devices. In this regard, 12 professional combat athletes were asked to wear GoBe2 devices during different sessions of intensive combat exercises. The curves provided by GoBe2 nano-sensor devices are further collected and analyzed for different combat durations. On the other hand, energy consumption in these athlete is calculated using other validated methods to evaluate reliability of GoBe2 wearable devices. Based on the results obtained from these experiments a multi-parameter mathematical model is presented for estimation of combat calorie consumptions. The results show that nanotechnology in these type of sensors could help in estimation of calorie consumption during combat. Moreover, the reliability of using wearable GoBe2 sensors are satisfactory except for some specific conditions. The mathematical model provides a satisfactory results based on athlete physical condition and also duration of the combat with about 8% error margin in the results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.55-55
• /
• 2022

수공구조물을 설계하고 수자원 관리 정책을 수립하기 위해 일반적으로 IDF (Intensity-Duration-Frequency) 곡선을 활용한다. 통상 IDF 곡선은 연최대치계열을 통계적으로 분석하여 재현빈도 마다의 적절한 강우강도를 추정하여 결정한다. 신뢰할 수 있는 결과를 산출하기 위해 최소 30년 이상의 정상 강우자료의 통계분석이 권장되나, 긴 재현기간의 최대강우강도는 본질적으로 확률분포 함수로부터 추정한 값이라는 한계가 있다. 한편, 우리나라에서 종관기상관측을 통해 고해상도의 지상관측 강수자료가 장기간 누적되어 관측자료로부터 직접 최대강우강도-지속시간 사이의 관계식을 도출할 수 있게 되었다. 따라서, 실무에서 널리 사용되고 있는 '홍수량 산정 표준 지침'의 확률강우 분석 결과를 오랫동안 관측된 강우자료에서 찾은 최대강우강도와의 비교가 가능해졌다. 본 연구에서는 우리나라에서 50년 이상 강우가 관측된 24개의 지점에 대해 최대강우강도-지속기간 관계식을 분석하였다. 이 결과를 바탕으로 통계적으로 추정한 IDF 곡선이 실제 관측자료에서 나타난 최대강우강도를 얼마나 정확하게 추정하는지 검증해 보았다.

• Journal of Korea Water Resources Association
• /
• v.53 no.2
• /
• pp.107-119
• /
• 2020

This study analyzed past drought characteristics based on the observed rainfall data and performed a long-term outlook for future extreme droughts using Representative Concentration Pathways 8.5 (RCP 8.5) climate change scenarios. Standardized Precipitation Index (SPI) used duration of 1, 3, 6, 9 and 12 months, a meteorological drought index, was applied for quantitative drought analysis. A single long-term time series was constructed by combining daily rainfall observation data and RCP scenario. The constructed data was used as SPI input factors for each different duration. For the analysis of meteorological drought observed relatively long-term since 1954 in Korea, 12 rainfall stations were selected and applied 10 general circulation models (GCM) at the same point. In order to analyze drought characteristics according to climate change, trend analysis and clustering were performed. For non-stationary frequency analysis using sampling technique, we adopted the technique DEMC that combines Bayesian-based differential evolution ("DE") and Markov chain Monte Carlo ("MCMC"). A non-stationary drought frequency analysis was used to derive Severity-Duration-Frequency (SDF) curves for the 12 locations. A quantitative outlook for future droughts was carried out by deriving SDF curves with long-term hydrologic data assuming non-stationarity, and by quantitatively identifying potential drought risks. As a result of performing cluster analysis to identify the spatial characteristics, it was analyzed that there is a high risk of drought in the future in Jeonju, Gwangju, Yeosun, Mokpo, and Chupyeongryeong except Jeju corresponding to Zone 1-2, 2, and 3-2. They could be efficiently utilized in future drought management policies.

• Structural Engineering and Mechanics
• /
• v.50 no.6
• /
• pp.755-772
• /
• 2014

A simplistic approach towards evaluation of complete load deflection response of Reinforced Concrete (RC) flexural members under post fire (residual) scenario is presented in this paper. The cross-section of the RC flexural member is divided into a number of sectors. Thermal analysis is performed to determine the temperature distribution across the section, for given fire duration. Temperature-dependent stress-strain curves for concrete and steel are then utilized to perform a moment-curvature analysis. The moment-curvature relationships are obtained for beams exposed to different fire durations. These are then utilized to obtain the load-deflection plots following pushover analysis. Moreover one of the important issues of modeling the initial stiffness giving due consideration to stiffness degradation due to material degradation and thermal cracking has also been addressed in a rational manner. The approach is straightforward and can be easily programmed in spreadsheets. The presented approach has been validated against the experiments, available in literature, on RC beam subjected to different fire durations viz. 1hr, 1.5hrs and 2hrs. Complete load-deflection curves have been obtained and compared with experimentally reported counterparts. The results also show a good match with the results obtained using more complicated approaches such as those involving Finite element (FE) modeling and conducting a transient thermal stress analysis. Further evaluation of the beams during fire (at elevated temperatures) was performed and a comparison of the mechanical behavior of RC beams under post fire and during fire scenarios is made. Detailed formulations, assumptions and step by step approach are reported in the paper. Due to the simplicity and ease of implementation, this approach can be used for evaluation of global performance of fire affected structures.

• Korean Journal of Acupuncture
• /
• v.27 no.3
• /
• pp.47-56
• /
• 2010

Objectives : The moxibustion is the method using the heat stimulation done by attached and burned a moxa on a healing point or acupuncture point with chemical stimulation of a resin made from burning them. The purpose of this study is to find the physical and thermal characteristics of moxibustion in order to standardize the moxa therapy method. Methods : In this study, the thermal changes were observed by means of a testo 845 device, which is an infra-red thermometer to measure the thermal changes. Results & Conclusions : 1. The thermal changes on the external surface of moxibustion did not depend on the weight of the moxa; the external surface temperature was about $500^{\circ}C$. 2. The central thermal changes depend on the weight of moxa; the central temperatures ranged from $500^{\circ}C$ to $700^{\circ}C$. 3. The burning duration of moxibustion depend on the weight of moxa but that of external surface temperature did not depend on the weight of moxa in high degree : about $400^{\circ}C$. 4. The integral values of central and external temperature curves were proportional to the weight of moxa; that is central temperature curves were higher than that of external.

• Earthquakes and Structures
• /
• v.22 no.2
• /
• pp.169-184
• /
• 2022

The importance of seismicity in developing countries and the strengthening of buildings is a topic of major importance. Therefore, the study of several solutions with the development of new technologies is of great importance to investigate the damage on retrofitted structures by using probabilistic methods. The Federal Emergency Management Agency considers three types of performance levels by considering different scenarios, intensity and duration. The selection and scaling of ground motions mainly depends on the aim of the study. Intensity-based assessments are the most common and compute the response of buildings for a specified seismic intensity. Assessments based on scenarios estimate the response of buildings to different earthquake scenarios. A risk-based assessment is considered as one of the most effective. This research represents a practical method for developing countries where exists many active faults, tall buildings and lack of good implementable approaches. Therefore, to achieve the main goal, two high-rise steel buildings have been modeled and assessed. The contribution of buckling-restrained braces in the elastic design of both buildings is firstly verified. In the nonlinear static range, both buildings presented repairable damage at the central top part and some life safety hinges at the bottom. The nonlinear incremental dynamic analysis was applied by 15 representative/scaled accelerograms to obtain levels of performance and fragility curves. The results shown that by using probabilistic methods, it is possible to estimate the probability of collapse of retrofitted buildings by buckling-restrained braces and tuned mass dampers, which are practical retrofitting options to protect existing structures against earthquakes.

• Journal of Korea Water Resources Association
• /
• v.44 no.4
• /
• pp.285-293
• /
• 2011

This study presents effects of downstream control point by coupled operation of dams and multi function weirs in the Geum River. Geum river basin that study area did authoritativeness high quality data to acquisition possibility. We applied the flow duration curve, flow regime coefficient, impounded flow index analysis to investigate the quantitative changes in natural flow regimes. In sphere that water supply is possible, this study applied believability that satisfy 95% at estimation year. Impounded flow index was calculated 0.292 by dam coupled operation and 0.297 by dam-weir coupled operation. The results indicate that the storage amount is increased by 29.7% as being added. Duration flow of downstream control point was improved because became coupled operation by regulation of dam and weir in the geum river.