• 방송과미디어
• /
• 제11권1호
• /
• pp.78-85
• /
• 2006

Cognitive radio is a paradigm for wireless communication in which either network of wireless node itself changes particular transmission or reception parameters to execute its tasks efficiently without interfering with the licensed users. This paper represents a performance of the cognitive radio technology on dual polarized MIMO system using six-port receiver. Six-port technology is well known direct conversion receiver. In this paper, a six-port phase discriminator based polarization signal separation is shown. That is, the SER(Symbol Error Rate) performance is improved using polarization separator and simple receiver architecture is proposed applying six-port receiver. The six-port technology has priority to adapt changeable frequency system and variable environments for cognitive radio. In general, dual polarized MIMO system has good capacity and quality using polarization separator [1].

• 한국전자파학회논문지
• /
• 제10권5호
• /
• pp.738-746
• /
• 1999

본 논문은 10GHz 에서 동작하는 마이크로스트립 $18\times2$ 이중 빔 배열 안테나를 설계 하였다. 단일 복사 소자는 개구면 결합형 패치를 사용하였으며, 이를 전송선 모델을 이용하여 해석 하였다. 급전선은 Side Lobe Level(SLL)를 줄이기 위해 tapered 직-병렬 구조를 사용하였다. 또한 45도에서 이중 빔을 갖게 하기 위해 소자간에 180도 위상차를 주었다. 그 결과 SLL은 25dB를 가지며, $\pm44.5$도에서 두개의 빔을 갖게 되며 8도의 좁은 빔폭을 갖는다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.617-624
• /
• 1997

This Paper Presents an effective and simple procedure for the simulation of the motion of the solid-liquid interfacial boundary and the transient temperature field during phase change process. To accomplish this purpose, an iterative implicit solution algorithm has been developed by employing the dual reciprocity boundary element method. The dual reciprocity boundary element approach provided in this paper is much simpler than the usual boundary element method applying a reciprocity principle and an available technique for dealing with domain integral of boundary element formulation simultaneously. The effectiveness of the present analysis method have been illustrated through comparisons of the calculation results of an example with its semi-analytical or other numerical solutions where available.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.144-146
• /
• 2007

본 논문에서는 고효율 LCD Backlight 구동을 위해 주로 사용하던 Phase shift Full bridge 방식을 대신할 수 있는 Dual Half Bridge Inverter를 제안하였다. 제안된 회로는 일반적인 Push-Pull 인버터 구동용 제어 IC의 출력 신호 2개로 스위치 4개를 제어할 수 있으며 넓은 범위의 ZVS(zero voltage switching)을 보장하여 소자 발열 및 효율 상승의 이점을 가진다. 제안된 Inverter Topology를 소개하며 동작모드 해석과 시뮬레이션 및 실험을 통한 검증결과를 제시 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3138-3140
• /
• 1999

We propose a robust blind equalization algorithm based on dual-mode algorithm which incorporates a stop-and-go technique. The constant modulus algorithm(CMA) exhibits very slow convergence when applied to QAM signals and generates phase error. We show that convergence properties of the dual-mode MCMA can be significantly improved by simply adding a stop-and-go technique. To speed up the convergence rate, the TMA-MCMA operates in triple mode that is based on the dual-mode of the MCMA incorporated with the tap-updating control modes of the SGA.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.815-824
• /
• 2013

Pneumatic exciters can be good replacements of electrodynamic, piezoelectric and hydraulic exciters owing to simple structure and large exciting force. One problem to be solved is a slow response caused by compressibility of air. Desirable frequency response characteristics of exciter are constant magnitude and zero degree phase, because users want no time delay between input signal and output force. For this reason, frequency range of pneumatic exciters is limited about 0~1 Hz. Therefore, expansion of frequency range is an important issue when designing the pneumatic exciter. In this paper, the pneumatic exciter which has same structure with active pneumatic isolator is dealt with. The dynamic characteristics are presented, and its limitation of expanding frequency range is shown based on analytical studies. Then the pneumatic exciter with dual-chamber is suggested to overcome this problem. Based on simulation study, a design method is presented.

• 한국유체기계학회 논문집
• /
• 제11권3호
• /
• pp.7-13
• /
• 2008

The cavitating flow simulation is of practical importance for many engineering systems, such as pump, turbine, nozzle, Infector, etc. In the present work, a solver for two-phase flows has been developed and applied to simulate the cavitating flows past hydrofoils. The governing equation is the two-phase Navier-Stokes equation, comprised of the continuity equation of liquid and vapor phase. The momentum and energy equation is in the mixture phase. The solver employs an implicit, dual time, preconditioned algorithm using finite difference scheme in curvilinear coordinates. An experimental data and other numerical data were compared with the present results to validate the present solver. It is concluded that the present numerical code has successfully accounted for two-phase Navier-Stokes model of cavitation flow.

• 한국전자파학회논문지
• /
• 제24권12호
• /
• pp.1215-1218
• /
• 2013

86 GHz 대역 VLBI(Very Long Baseline Interferometry) 이중원형 편파 관측에 사용되는 90도 위상천이기를 Corrugated 정사각형 도파관 구조를 이용하여 개발하였다. 이 90도 위상천이기는 정사각형 도파관 내부에 Corrugation 구조를 만들어 정사각형 도파관을 통과한 수직, 수평 편파의 위상차이가 85~115 GHz 대역에서 $90{\pm}3.3$도 이내가 되도록 설계하였고, 제작 후 측정 결과는 위 주파수 대역에서 반사 손실과 삽입 손실이 각각 17 dB, 0.25 dB 이하이고 Axial ratio는 0.6 dB 이하이다.

• 한국자동차공학회논문집
• /
• 제25권1호
• /
• pp.82-91
• /
• 2017

This paper is a study on the bi-directional DC-DC converter, one of the key elements of 48V-12V dual systems in mild hybrid electric vehicles. Mild hybrid electric vehicles require a bi-directional DC-DC converter that can efficiently transmit power in two directions between a 48V battery and a 12V battery. To develop a bi-directional DC-DC converter with better price competitiveness, upgraded fuel economy, excellent performance and smaller size, this study designed, produced and presented a circuit that improved on the existing one. In the proposed 8-phase bi-directional DC-DC converter, the size of the passive element was reduced through the 8-phase interleaved topology, whereas downscaling had previously posed a difficulty. This study also designed and produced a 2.5kW class prototype. Based on the proposed 8-phase interleaved topology, a size of 227.5 (W) * 172 (L) * 64.35 (H) was achieved. In the boost mode operation and buck operation modes, the maximum efficiency was recorded at 94.04 % and 95.78 %, respectively.

• 대한전자공학회논문지TC
• /
• 제46권11호
• /
• pp.56-60
• /
• 2009

본 논문에서는 낮은 위상잡음을 개선하기 위하여 마이크로스트립 사각 병렬 나선형 공진기를 이용한 향상된 전압 제어 발진기를 제시하였다. 마이크로스트립 사각 개방 루프 공진기는 큰 결합 계수 값을 갖는데 이는 Q값을 크게 만들고 전압 제어발진기의 위상 잡음을 줄일 수 있다. 1.8 V의 공급 전압을 사용한 전압 제어 발진기는 8.935~9.4 GHz의 주파수 조절 범위에서 -115.0~-117.34 dBc/Hz @100 kHz의 위상 잡음 특성을 갖는다. 마이크로스트립 사각 병렬 나선형 공진기와 일반적인 나선형 공진기를 비교했을 때, 개선된 Q값 특성은 -32.7 dB와 -57.6 dB이다. 제작된 저위상 잡음 전압 제어 발진기는 X-대역에서 전압 발진기로 이용될 수 있음을 확인 하였다.