• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.1
• /
• pp.1-9
• /
• 2017

With the Development of Wireless Network Technology and Wireless Link Technology, Wireless Mesh Network (WMN) is Attracting Attention as a Key Technology to Construct the Wireless Transit Network. The WMN has been Studied for a Long Time in Various Fields, however there are still many Problems that have not been solved yet. One of them is the Routing Problem to find an Optimal path in a Multi-hop Network Composed of Wireless Links. In the Hybrid-WMN, which is one of the Three Types of WMN, Optimal Path Selection Requires Research on Path Search Protocols that Effectively use the Infrastructure Mesh as a Transit Network, Together with Research for a Routing Metric with Excellent Performance. Therefore, this Paper Proposes a Dual Mode-AODV(Ad hoc On-demand Distance Vector) for Hybrid-WMN. Simulation result shows that the Path Selection Delay was Reduced by 52% than AODV when the Proposed Dual Mode-AODV was applied.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.774-777
• /
• 2005

In this paper, a constant frequency phase shifting PWM controlled voltage source full bridge-type series load resonant high-frequency inverter using the IGBT power modules is presented for innovative consumer electromagnetic induction heating applications such as a hot water producer, steamer and super heated steamer. The full bridge arm side link passive quasi-resonant capacitor snubbers in parallel with the each power semiconductor device and high frequency AC load side linked active edge inductive snubber-assisted series load resonant tank soft switching inverter with a constant frequency phase shifted PWM control scheme is discussed and evaluated on the basis of the simulation and experimental results. It is proved from a practical point of view that the series load resonant and edge resonant hybrid high-frequency soft switching PWM inverter topology, what is called class DE type. including the variable-power variable-frequency(VPVF) regulation function can expand zero voltage soft switching commutation range even under low output power setting ranges, which is more suitable and acceptable for induction heated dual packs fluid heater developed newly for consumer power utilizations. Furthermore, even in the lower output power regulation mode of this high-frequency load resonant tank high frequency inverter circuit it is verified that this inverter can achieve ZVS with the aid of the single auxiliary inductor snubber.

• International Journal of Oral Biology
• /
• v.46 no.4
• /
• pp.184-189
• /
• 2021

When luting indirect restorations with dual-cure resin cement (DCRC), excess cement can be easily removed by performing tack cure of DCRC for a few seconds. The purpose of this study was to evaluate whether different tack cure times affect polymerization shrinkage (PS) of the selected DCRC. One dual-cure resin cement (G-CEM LinkAce, GC) was used for measuring PS in light-cure (LC group), self-cure (SC group), and two tack-cure modes. In the first tack-cure subgroup, tack cure was performed for 1, 2, 3, and 5 seconds, followed by light cure after 2 minutes of remnant removal time in each case (TC-LC groups). In the other tack-cure subgroup, tack cure was performed for the same lengths of time, but followed by self-cure in each case (TC-SC groups). PS was measured by a modified bonded disc method for 1,800 seconds. One-way analysis of variance followed by Duncan's post hoc test was used to determine any statistically significant differences among the test groups (α = 0.05). When the DCRC was self-cured after tack cure, PS was significantly lower than when it was only self-cured (p < 0.05); however, tack cure time did not affect PS (p > 0.05). When the DCRC was light-cured, PS was not affected by tack cure or tack cure time (p > 0.05). Therefore, tack cure within 5 seconds did not negatively affect the final PS when the DCRC was light-cured after cement remnant removal.

• Knowledge Management Research
• /
• v.23 no.4
• /
• pp.159-175
• /
• 2022

As creativity is a crucial attribute for companies' survival and innovative success, many firms encourage and implement ways to promote employee creativity. Previous studies in the dual pathway to creativity model have shown that creativity can be enhanced when either the cognitive flexibility or cognitive persistence path is triggered. Although individuals have different personal traits, prior research has rarely investigated whether one pathway is more effective for a certain personality in promoting creativity than the other. Using attachment theory, we examined the influence of attachment style on the degree of the impact of each path on creativity. Specifically, we hypothesized that securely attached people would show higher creativity only when they use the cognitive flexibility path. Data from the US support our hypothesis. Our research highlights that the link between cognitive flexibility and creativity is salient when securely attached people use the cognitive flexibility path because of the strong fit between secure attachment and flexible thinking.

• Journal of Power Electronics
• /
• v.13 no.2
• /
• pp.256-263
• /
• 2013

This paper presents an IHQRR (Integrated High Quality Rectifier Regulator) BIFRED (Boost Integrated Flyback Rectifier Energy Storage DC-DC) converter fed BLDC (Brushless DC) motor drive. A reduced sensor topology is derived by utilizing a BIFRED converter to operate in a dual DCM (Discontinuous Conduction Mode) thus utilizing a voltage follower approach for the PFC (Power Factor Correction) and voltage control. A new approach for speed control is proposed using a single voltage sensor. The speed of the BLDC motor drive is controlled by varying the DC link voltage of the front end converter. Moreover, fundamental frequency switching of the VSI's (Voltage Source Inverter) switches is used for the electronic commutation of the BLDC motor which reduces the switching losses in the VSI. The proposed drive is designed for a wide range of speed control with an improved power quality at the AC mains which falls within the recommended limits imposed by international power quality standards such as IEC 61000-3-2.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2567-2582
• /
• 2016

This paper investigates the impact of outdated channel state information (CSI) on the performance of the incremental amplify-and-forward (AF) opportunistic relaying (OR) over dual-hop Rayleigh fading channels. According to the definition of distribution function, we obtain the cumulative distribution function (CDF) of the actual combined signal-to-noise ratio (SNR) received at the destination. Based on this CDF, the closed-form expressions of the average spectral efficiency and outage probability are derived for the incremental AF OR under outdated CSI. Numerical results show that in the low region of the average SNR of the direct link, outdated CSI deteriorates the system performance, whereas in the high region, outdated CSI has almost no impact on the system performance.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.43.1-43.1
• /
• 2013

We report the preliminary results of our GMVA(Global mm VLBI Array) observation at the frequency of 86 GHz. Observation were made in the dual polarization mode (LCP and RCP), to produce the polarimetric maps with the maximum angular resolution which the array is capable of. We aim to link the source-integrated AGN polarization properties with the polarized spatial source structure, by mapping the polarized "fine structure" of the target AGN. We selected 2 targets, 0954+658 and 0716+714, which (1) have been observed multiple times by the PdBI polarimetric monitoring program; (2) have sufficient integrated fluxes ($S_{90GHz}$ > 1 Jy) ; (3) are close enough to resolve the source structure < 1 pc with given angular resolution ; and (4) are located at high northern declination for good UV coverages. As preliminary results, we present LL and RR polarized images of each target with the maximum angular resolution of ${\sim}60{\mu}as$. Extended structures, probably the jet outflows, are discovered in both sources.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.2
• /
• pp.303-311
• /
• 1996

The Self Healing Ring (SHR) is one of the most Intriguing schemes which provide survivability for telecommunication networks. To design a cost effective SONET ring it is necessary to consider load balancing problems by which the link capacity is determined. The load balancing problem in SONET ring when demand splitting is not allowed is considered in this paper. An efficient algorithm is presented which provides the best solution starting from various Initial solutions. The initial solution is obtained by routing ell demands such that no demands pass through an are In the ring. The proposed algorithm iteratively improves the Initial solution by examining each demand and selecting the maximum load are in its path. The demand whose maximum arc load is biggest is selected to be routed in opposite direction. Computational results show that the proposed algorithm is excellent both in the solution quality and in the computational time requirement. The average error bound of the algorithm is 0.11% of the optimum and compared to dual-ascent approach which has good computational results than other heuristics.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.513-515
• /
• 1999

In this paper, Neuro-Fuzzy controller which has the characteristic of Fuzzy control and artificial Neural Network is designed A fuzzy rule to be applied is selected automatically by the allocated neurons. The neurons correspond to Fuzzy rules which are created by the expert. In order to adaptivity, the more precise modeling is implemented by error back propagation learning of adjusting the link-weight of fuzzy membership function in Neuro-fuzzy controller. The more classified fuzzy rule is used to include the property of Dual mode Method. To test the effectiveness of the algorithm designed above the experiment for DC servo motor with variable load as variable load plant is implementation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.951-957
• /
• 1988

A collision-free trajectory planning algorithm is proposed to optimally coordinate two robots working in a common 3-D workspace. Each link of the two robots is modeled as a line segment and by their motion priority, one of the two robots is chosen as the master and the other the slave. And the one-step-ahead minimum distance between the two robots is computed by moving the master to the next location on its specified trajectory. Then the nominal trajectory of the slave is modified such that the distance between the next locations of the master and the slave must be larger than a prespecified allowable minimum distance. Here the weighted sum of the trajectory error and the joint motions of the slave is minimized by using the linear programming technique under the constraints that joint angle and velocity limits are not violated. To show the validity of the proposed algorithm, a numerical example is illustrated by employing a two dof's and a three dof's planar robots.