• 동력기계공학회지
• /
• 제5권1호
• /
• pp.97-103
• /
• 2001

The present study was investigated changes of precipitation behaviour of laves phase in ferrite single phase and ferrite-martensite dual phase and the mechanical properties of 10%Cr ferritic alloys. In the ferrite phase, laves phase was mainly precipitated, whereas in the martensite phase, carbide was preferentially formed during the initial stage of aging and with increasing aging time. Laves phase and carbide were simultaneously precipitated by precipitation of laves phase at around carbide. Strength and toughness were lowered by the disk-type precipitator in the initial stage of aging and toughness was recovered with increasing of aging time and then, decreasing by precipitation of laves phase.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.421-426
• /
• 2009

This paper presents vibration analysis of maskless exposure module in Printed Circuit Board (PCB) manufacturing system. In order to complete exposure process in PCB, masking type module has been widely used in electronics industries. However, masking process confronts some limitations of application due to higher production cost for masking as well as lower printing resolution. Therefore, maskless exposure module is started to be in the spotlight for flexible production system to meet the needs of fabrication in variable patterns at low cost. Since maskless exposure process adopts direct patterning to PCB, vibration problems become more critical compared to conventional masking type process. Moreover, movements of exposure engine as well as stage generate vibration sources in the system. Thus, it is imperative to analyze the vibration characteristics for the maskless exposure module to improve the quality and accuracy of PCB. In this study, vibration analysis using the Finite Element Analysis is conducted to identify the critical structural parts deteriorating vibration performance. Also, Experimental investigations are conducted by single/dual encoder measurement process under the operating module speed. Measurement points of vibration are selected by three places, which are base of stage, exposure engine and top of stage, to check the effect of vibration from the exposure engine. Comparisons between analysis results and experimental measurement are conducted to confirm the accuracy of analysis results including the developed FE model. Finally, this studies show feasibility of optimal design using the developed FE analysis model.

• 한국소음진동공학회논문집
• /
• 제19권12호
• /
• pp.1322-1328
• /
• 2009

This paper presents vibration analysis of maskless exposure module in printed circuit board(PCB) manufacturing system. In order to complete exposure process in PCB, masking type module has been widely used in electronics industries. However, masking process confronts some limitations of application due to higher production cost for masking as well as lower printing resolution. Therefore, maskless exposure module is started to be in the spotlight for flexible production system to meet the needs of fabrication in variable patterns at low cost. Since maskless exposure process adopts direct patterning to PCB, vibration problems become more critical compared to conventional masking type process. Moreover, movements of exposure engine as well as stage generate vibration sources in the system. Thus, it is imperative to analyze the vibration characteristics for the maskless exposure module to improve the quality and accuracy of PCB. In this study, vibration analysis using the finite element analysis is conducted to identify the critical structural parts deteriorating vibration performance. Also, Experimental investigations are conducted by single/dual encoder measurement process under the operating module speed. Measurement points of vibration are selected by three places, which are base of stage, exposure engine and top of stage, to check the effect of vibration from the exposure engine. Comparisons between analysis results and experimental measurement are conducted to confirm the accuracy of analysis results including the developed FE model. Finally, this studies show feasibility of optimal design using the developed FE analysis model.

• 한국전자파학회논문지
• /
• 제21권6호
• /
• pp.651-659
• /
• 2010

본 논문에서는 software defined radio(SDR) 기반의 고속의 다중 모드, 다중 대역을 위한 새로운 six-port 직접변환 수신기를 제안한다. 설계한 수신기는 2개의 CMOS four-port BPSK 수신기와 직교 LO 신호 발생을 위한 이중 대역 1단 polyphase 필터로 구성되어 있다. 0.18 ${\mu}m$ CMOS 공정을 이용하여 마이크로파 대역에서 처음으로 개발한 four-port 수신기는 두 개의 능동 결합기, 능동 발룬, 두 개의 전력 검출기 및 아날로그 디코더로 구현되어 있다. 제안한 polyphase 필터는 type-I 구조를 선택하였으며, LO 신호의 전력 손실을 줄이기 위하여 1단으로 구현 하였고, 커패시터를 사용하는 것 대신하여 LC 공진구조를 적용하여 이중 대역 동작을 구현하였다. 제안한 sixport 수신기의 RF 가용범위를 확장하기 위하여, six-port junction과 전력 검출기에 I/Q 위상 및 크기를 보정하는 회로를 추가하였다. 제안한 회로에서 위상과 크기 부정합의 보정 범위는 각각 8도와 14 dB이다. 제작한 six-port 수신기는 이중 대역인 900 MHz와 2.4 GHz 대역에서 M-QAM, M-PSK의 40 Msps의 변조 신호를 성공적으로 복조하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권6호
• /
• pp.760-770
• /
• 2016

A 12-bit 750 kS/s Dual-Sampling Successive Approximation Register Analog-to-Digital Converter (SAR ADC) technique with reduced Capacitive DAC (CDAC) is presented in this paper. By adopting the Adaptive Power Control (APC) technique for the two-stage latched type comparator and using bootstrap switch, power consumption can be reduced and overall system efficiency can be optimized. Bootstrapped switches also are used to enhance the sampling linearity at a high input frequency. The proposed SAR ADC reduces the average switching energy compared with conventional SAR ADC by adopting reduced the Most Significant Bit (MSB) cycling step with Dual-Sampling of the analog signal. This technique holds the signal at both comparator input asymmetrically in sample mode. Therefore, the MSB can be calculated without consuming any switching energy. The prototype SAR ADC was implemented in $0.18-{\mu}m$ CMOS technology and occupies $0.728mm^2$. The measurement results show the proposed ADC achieves an Effective Number-of-Bits (ENOB) of 10.73 at a sampling frequency of 750 kS/s and clock frequency of 25 MHz. It consumes only 0.13 mW from a 5.0-V supply and achieves the INL and DNL of +2.78/-2.45 LSB and +0.36/-0.73 LSB respectively, SINAD of 66.35 dB, and a Figures-of-Merit (FoM) of a 102 fJ/conversion-step.

• 융복합기술연구소 논문집
• /
• 제1권2호
• /
• pp.6-15
• /
• 2011

This paper reports the design and fabrication of a micro-electro-mechanical-system(MEMS)-based electrostatic angular microactuator for a dual-stage servo. The proposed actuator employs a novel electrode pattern named "skewed electrode array(SEA)" scheme. It is shown that SEA has better linearity than a parallel plate type actuator and stronger force than a comb-drive based actuator. The moving and the fixed electrodes are arranged to make the driving force perpendicular to the rotating moment of arm. By changing the electrode overlap length, the magnitude of electrostatic force and stable displacement will be changed. In order to optimize the design, an electrostatic FE analysis was carried out and an empirical force model was established for SEA. A new assembly method which will allow the active electrodes to be located beneath the slider was developed. The active electrodes are connected by inner and outer rings lifted on the base substrate, and the inner and outer rings are connected to platform on which the slider locates. Electrostatic force between active electrodes and platform can be used for exiting out of plane modes, so this provides the possibility of the flying height control. A microactuator that can position the pico-slider over ${\pm}0.5{\mu}m$ using under 20 volts for a 2 kHz fine-tracking servo was designed and fabricated using SoG process.

• 한국광학회지
• /
• 제4권1호
• /
• pp.15-21
• /
• 1993

본 연구에서는 설계제작된 KrF 엑시머 레이저 스텝퍼는 광원인 KrF엑시머 레이저, 조명광학계, 축소트영광학계, 정밀구동 웨이퍼 스테이지, 정렬시스템 및 이들을 제어하기 위한 제어계로 구성되어 있다. 본 실험에서 사용한 KrFdprtlaj 레이저는 밴드폭 3pm, 반복주파수 200Hz, 평균축력 3W이고, 5:1 투영렌즈는 N.A. 0.42, 전체 필드영역 $\varphi$21.2mm, 왜곡수차 최대 60nm 이하이다. 또한 정밀구동 웨이퍼 스테이지의 재현성과 해상도는 각각 $\pm$0.08$\mu\textrm{m}$/200mm(3 sigma), 100mm 반경에서 0.05 $\mu\textrm{m}$이다. 자동 초점 시스템은 $\pm$50$\mu\textrm{m}$범위에서 0.1$\mu\textrm{m}$의 해상도를 나타냈으며, 자동수평시스템은 120 arcsec 범위에서 larcsec의 해상도를 나타냈다. OFF-AXIS 정렬방식에서는 0.2$\mu\textrm{m}$의 해상도를 가지며, 두빔의 간섭을 이용한 새로운 TTL 정렬은 0.1$\mu\textrm{m}$의 해상도를 나타냈다. 스텝퍼 패턴 실험결과 SAL603레지스트를 사용하였을 때 웨이퍼의 노광후 열처리 $105^{\circ}C$, 60초에서 0.3$\mu\textrm{m}$ Lines and Spaces(L/S)까지 해상되었으며, 0.34$\mu\textrm{m}$ L/S에서 1$\mu\textrm{m}$의 초점심도를 얻을 수 있었다. 마스크 패턴과 레지스트 패턴의 선형성은 0.4$\mu\textrm{m}$ L/S가지 유지 되었다. 또한 XP-89131레지스트의 경우 노광후 열처리 $110^{\circ}C$, 60초에서 0.34$\mu\textrm{m}$ L/S까지 해상됨을 알수 있었다.

• 기록학연구
• /
• 제10호
• /
• pp.276-322
• /
• 2004

Historical interest in China in 1930s has been mostly focused on political characteristic of the National Government(國民政府) which was established by the KMT(中國國民黨) as a result of national unification. It is certain that China had a chance to construct a modern country by the establishment of the very unified revolutionary government. But, it was the time of expanding national crises that threatened the existence of the country such as the Manchurian Incident and the Chinese-Japanese War as well as the chaos of the domestic situation, too. So it has a good reason to examine the characteristic and pattern of the response of the political powers of those days. But, as shown in the recent studies, the manifestation method of political power by the revolutionary regime catches our attention through the understanding of internal operating system. Though this writing started from the fact that the Nationalist Government executed the administrative reform which aimed at "administrative efficiency" in the middle of 1930s, but it put stress on the seriousness of the problem and its solution rather than political background or results. "Committee on Administrative Efficiency(行政效率委員會)", the center of administrative reform movement which was established in 1934, examined the plan to execute the reform through legislation by the Executive Council(行政院) on the basis of the results of relevant studies. They claimed that the construction of a modern country should be performed by not political revolution anymore but by gradual improvement and daily reform, and that the operation of the government should become modern, scientific and efficient. There were many fields of administrative reform subjects, but especially, the field of records and archives adminstration(文書檔案行政) was studied intensively from the initial stage because that subject had already been discussed intensively. They recognized that records and archives were the basic tool of work performance and general activity but an inefficient field in spite of many input staff members, and most of all, archival reform bring about less conflicts than the fields of finance, organization and personnel. When it comes to the field of records adminstration, the key subjects that records should be written simply, the process of record treatment should be clear and the delay of that should be prevented were already presented in a records administrative meeting in 1922. That is, the unified law about record management was not established, so each government organization followed a conventional custom or performed independent improvement. It was through the other records administrative workshop of the Nationalist Government in 1933 when the new trend was appeared as the unified system improvement. They decided to unify the format of official records, to use marker and section, to unify the registration of receipt records and dispatch records and to strengthen the examination of records treatment. But, the method of records treatment was not unified yet, so the key point of records administrative reform was to establish a unified and standard record management system for preventing repetition by simplifying the treatment procedure and for intensive treatment by exclusive organizations. From the foundation of the Republic of China to 1930s, there was not big change in the field of archives administration, and archives management methods were prescribed differently even in the same section as well as same department. Therefore, the point at issue was to centralize scattered management systems that were performed in each section, to establish unified standard about filing and retention period allowance and to improve searching system through classification and proper number allowance. Especially, the problem was that each number system and classification system bring about different result due to dual operation of record registration and archives registration, and that strict management through mutual contrast, searching and application are impossible. Besides, various problems such as filing tools, arrangement method, preservation facilities & equipment, lending service and use method were raised also. In the process this study for the system improvement of records and archives management, they recognized that records and archives are the identical thing and reached to create a successive management method of records and archives called "Records and Archives Chain Management Method(文書檔案連鎖法)" as a potential alternative. Several principles that records and archives management should be performed unitedly in each organization by the general record recipient section and the general archives section under the principle of task centralization, a consistent classification system should be used by classification method decided in advance according to organizational constitution and work functions and an identical number system should be used in the process of record management stage and archive management stage by using a card-type register were established. Though, this "Records and Archives Chain Management Method" was developed to the stage of test application in several organizations, but it was not adopted as a regular system and discontinued. That was because the administrative reform of the Nationalist Government was discontinued by the outbreak of the Chinese-Japanese War. Even though the administrative reform in the middle of 1930s didn't produce practical results but merely an experimentation, it was verified that the reform against tradition and custom conducted by the Nationalist Government that aimed for the construction of a modern country was not only a field of politics, but on the other hand, the weak basis of the government operation became the obstacle to the realization of the political power of the revolutionary regime. Though the subject of records and archives administrative reform was postponed to the future, it should be understood that the consciousness of modern records and archives administration and overall studies began through this examination of administrative reform.

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.1057-1064
• /
• 2014

최근 전세계적으로 재생에너지의 관심이 증가하고 있다. 그 중 많은 관심을 받고 있는 것이 상대적으로 낮은 온도의 폐열을 사용하는 유기랭킨사이클(ORC)이다. 유기랭킨사이클은 기존의 증기터빈사이클과 유사한 기술을 사용하지만 낮은 온도의 폐열을 사용하기 위해서 증기대신 냉매를 작동유체로 사용한다. 작동유체를 냉매로 사용함으로 인해 이상기체 가정을 사용할 수 없고, 이는 ORC 시스템에 이용되는 터빈의 설계를 좀 더 복잡하게 만든다. 또, 냉매의 큰 분자량과 복잡한 분자구조로 인하여 낮은 음속을 가지게 되고 이로 인해서 쉽게 초킹 조건에 접근하게 된다. 본 연구에서 R245fa를 작동유체로 하여 입구온도 $124^{\circ}$에 팽창비 9 의 조건에서 터빈의 효율을 증가시키기 위해 다단으로 설계된 아음속 ORC 터빈을 설계하는 과정과 터빈의 성능에 대하여 설명하고자 한다. 설계된 터빈은 200kW 급의 ORC 발전 시스템에 사용될 예정이다.

• 복식
• /
• 제4권
• /
• pp.87-114
• /
• 1981

A costume reveals the social characteristics of the era in which it is worn, thus we can say that the history of change of the costume is the history of change of the living culture of the era. Since the Three States era, the costume structure of this country had been affected by the costume system of the China's historical dynasties in the form of the grant therefrom because of geographical conditions, which affection was conspicuous for the bureaucrat class, particularly including but not limited to the Kings' familities. Such a grant of the costume for the bureaucrat class (i.e., official uniform) was first given by the Dang-dynasty at the age of Queen Jinduck, the 28th of the Shilla-dynasty. Since then, the costume for the bureaucrats had consecutively been affected as the ages had gone from the unified Shilla, to the Koryo and to the Yi-dynasty. As the full costumes officially used by government officials (generally called "Baek Gwan") in the Yidynasty, there existed Jo-bok, Gong-bok and Sang-bok. Of such official costumes, Gong-bok was worn at the time of conducting official affairs of the dynasty, making a respectful visit for the expression of thanks or meeting diplomatic missions of foreign countries. It appears no study was made yet with regard to the Gong-bok while the studies on the Jo-bok and the Sangbok were made. Therefore, this article is, by rendering a study and research on the styles of costumes of civil servants' stone images erected at the Kings' tombs of the Yi-dynasty, to help the persons concerned understand the Gong-bok, one of the official costume for Baek Kwan of that age and further purports to specifically identify the styles and changes of the Gong-bok, worn by Baek Gwan during the Yi-dynasty, consisting of the Bok-doo (a hat, four angled and two storied with flat top), Po (gown), Dae (belt), and Hol (small and thin plate which was officially held by the government officials in hand, showing the courtesy to and writing brief memorandums before the King) and Hwa (shoes). For that purpose, I investigated by actually visiting the tombs of the Kings of the Yi-dynasty including the Geonwon-neung, the tomb of the first King Tae-jo and the You-neung, the tomb of the 27th King Soon-jong as well as the tombs of the lawful wives and concubines of various Kings, totalling 29 tombs and made reference to relevant books and records. Pursuant. to this study, of the 29 Kings' tombs the costume styles of civil servants' stone images erected at the 26 Kings' tombs are those of Gong-bok for Baek-gwan of the Yi-dynasty wearing Bok-doo as a hat and Ban-ryeong or Dan-ryenog Po as a gown with Dae, holding Hol in hand and wearing shoes. Other than those of the 26 tombs, the costume styles of the Ryu-neung, the tomb of the Moon-jo who was the first son of 23rd King Soon-jo and given the King's title after he died and of the You-neung, the tomb of the 27th King Soon-jong are those of Jobok with Yang-gwan (a sort of hat having stripes erected, which is different from the Bok-doo), and that of the Hong-neung, the tomb of the 26th King Go-jong shows an exceptional one wearing Yang-gwan and Ban-ryeong Po ; these costume styles other than Gongbok remain as the subject for further study. Gong-bok which is the costume style of civil servants' stone images of most of the Kings' tombs had not been changed in its basic structure for about 500 years of the Yi-dynasty and Koryo categorized by the class of officials pursuant to the color of Po and materials of Dae and Hol. Summary of this costume style follows: (1) Gwan-mo (hat). The Gwan-mo style of civil servants' stone images of the 26 Kings' tombs, other than Ryu-neung, Hong-neung and You-neung which have Yang-gwan, out of the 29 Kings' tombs of the Yi-dynasty reveals the Bok-doo with four angled top, having fore-part and back-part divided. Back part of the Bok-doo is double the fore-part in height. The expression of the Gak (wings of the Bokdoo) varies: the Gyo-gak Bok-doo in that the Gaks, roundly arisen to the direction of the top, are clossed each other (tombs of the Kings Tae-jong), the downward style Jeon-gak Bok-doo in that soft Gaks are hanged on the shoulders (tombs of the Kings Joong-jong and Seong-jong) and another types of Jeon-gak Bok-doo having Gaks which arearisen steeply or roundly to the direction of top and the end of which are treated in a rounded or straight line form. At the lower edge one protrusive line distinctly reveals. Exceptionally, there reveals 11 Yang-gwan (gwan having 11 stripes erected) at the Ryu-neung of the King Moon-jo, 9 Yang-gwan at the Hong-neung of the King Go-jong and 11 Yang-gwan at the You-neung of the King Soon-jong; noting that the Yang-gwan of Baek Kwan, granted by the Myeong-dynasty of the China during the Yi-dynasty, was in the shape of 5 Yang-gwan for the first Poom (class) based on the principle of "Yideung Chaegang" (gradual degrading for secondary level), the above-mentioned Yang-gwans are very contrary to the principle and I do not touch such issue in this study, leaving for further study. (2) Po (gown). (a) Git (collar). Collar style of Po was the Ban-ryeong (round collar) having small neck-line in the early stage and was changed to the Dan-ryeong (round collar having deep neck-line) in the middle of the: dynasty. In the Dan-ryeong style of the middle era (shown at the tomb of the King Young-jo); a, thin line such as bias is shown around the internal side edge and the width of collar became wide a little. It is particularly noted that the Ryu-neung established in the middle stage and the You-neung in the later stage show civil servants in Jo-bok with the the Jikryeong (straight collar) Po and in case of the Hong-neung, the Hong-neung, the tomb of the King Go-jong, civil servants, although they wear Yang-gwan, are in the Ban-ryeong Po with Hoo-soo (back embroidery) and Dae and wear shoes as used in the Jo-bok style. As I could not make clear the theoretical basis of why the civil servants' costume styles revealed, at these tombs of the Kings are different from those of other tombs, I left this issue for further study. It is also noted that all the civil servants' stone images show the shape of triangled collar which is revealed over the Godae-git of Po. This triangled collar, I believe, would be the collar of the Cheomri which was worn in the middle of the Po and the underwear, (b) Sleeve. The sleeve was in the Gwan-soo (wide sleeve) style. having the width of over 100 centimeter from the early stage to the later stage arid in the Doo-ri sleeve style having the edge slightly rounded and we can recognize that it was the long sleeve in view of block fold shaped protrusive line, expressed on the arms. At the age of the King Young-jo, the sleeve-end became slightly narrow and as a result, the lower line of the sleeve were shaped curved. We can see another shape of narrow sleeve inside the wide sleeve-end, which should be the sleeve of the Cheom-ri worn under the Gong-bok. (c) Moo. The Moo revealed on the Po of civil servants' stone images at the age of the King Sook-jong' coming to the middle era. Initially the top of the Moo was expressed flat but the Moo was gradually changed to the triangled shape with the acute top. In certain cases, top or lower part of the Moo are not reveald because of wear and tear. (d) Yeomim. Yeomim (folding) of the Po was first expressed on civil servants' stone images of the Won-neung, the tomb of the King Young-jo and we can seemore delicate expression of the Yeomim and Goreum (stripe folding and fixing the lapel of the Po) at the tomb of the Jeongseong-wanghoo, the wife of the King Young-jo, At the age of the King Soon-jo, we can see the shape of Goreum similar to a string rather than the Goreum and the upper part of the Goreum which fixes Yeomim was expressed on the right sleeve. (3) Dae. Dae fixed on the Po was placed half of the length of Po from the shoulders in the early stage. Thereafter, at the age of the King Hyeon-jong it was shown on the slightly upper part. placed around one third of the length of Po. With regard to the design of Dae, all the civil servants' stone images of the Kings' tombs other than those of the Geonwon-neung of the King Tae-jo show single or double protrusive line expressed at the edge of Dae and in the middle of such lines, cloud pattern, dangcho (a grass) pattern, chrysanthemum pattern or other various types of flowery patterns were designed. Remaining portion of the waist Dae was hanged up on the back, which was initially expressed as directed from the left to the right but thereafter expressed. without orderly fashion,. to the direction of the left from the right and vice versa, Dae was in the shape of Yaja Dae. In this regard, an issue of when or where such a disorderly fashion of the direction of the remaining portion of waist Dae was originated is also presented to be clarified. In case of the Ryuneung, Hong-neung and You-neung which have civil servants' stone images wearing exceptional costume (Jo-bok), waist Dae of the Ryu-neung and Hong-neung are designed in the mixture of dual cranes pattern, cosecutive beaded pattern and chrvsenthemum pattern and that of You-neung is designed in cloud pattern. (4) Hol. Although materials of the Hol held in hand of civil servants' stone images are not identifiable, those should be the ivory Hol as all the Baek Gwan's erected as stone images should be high class officials. In the styles, no significant changes were found, however the Hol's expressed on civil servants' stone images of the Yi-dynasty were shaped in round top and angled bottom or round top and bottom. Parcicularly, at the age of the King Young-jo the Hol was expressed in the peculiar type with four angles all cut off. (5) Hwa (shoes). As the shoes expressed on civil servants' stone images are covered with the lower edges of the Po, the styles thereof are not exactly identifiable. However, reading the statement "black leather shoes for the first class (1 Poom) to ninth class (9 Poom)," recorded in the Gyeongkook Daejon, we can believe that the shoes were worn. As the age went on, the front tips of the shoes were soared and particularly, at the Hong-neung of the King Go-jong the shoes were obviously expressed with modern sense as the country were civilized.