• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.125-133
• /
• 2013

PURPOSES : The purpose of this study is to propose delay-minimizing operation methodology of a signalized intersection based upon optimization of lane-uses on approaching lanes for an intersection. METHODS : For the optimization model of lane-uses, a set of constraints are set up to ensure feasibility and safety of the lane-uses, traffic flow, and signal settings. Minimization of demand to saturation flow ratio of a dual-ring signal control system is introduced to the objective function for delay minimization and effective signal operation. Using the optimized lane-uses, signal timings are optimized by delay-based model of TRANSYT-7F. RESULTS : It was found that the proposed objective function is great relation with delay time for an intersection. From the experimental results, the method was approved to be effective in reducing delay time. Especially, cases for two left-turn lanes reduced greater delays than those for a left turn lane. It is noticed that the cases for different traffic volume by approach reduced greater delays than those for the same traffic volume by approach. CONCLUSIONS : It was concluded that the objective function is proper for lane-uses optimizing model and the operation method is effective in reducing delay time for signalized intersections.

• Journal of Chest Surgery
• /
• v.49 no.5
• /
• pp.383-386
• /
• 2016

Anomalous origin of the left coronary artery from the pulmonary artery (ALCAPA) is an extremely rare, potentially fatal, congenital anomaly with a high mortality rate in the first year of life. It occurs rarely in adulthood and may appear with malignant ventricular arrhythmia or sudden death. We report a case of a 49-year-old woman with ALCAPA who presented with dyspnea on exertion. Management was coronary artery bypass grafting to the left anterior descending artery and obtuse marginal arteries, closure of the left main coronary artery ostium, and reestablishment of the dual coronary artery system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.799-804
• /
• 2001

Nonlinear normal mode (NNM) vibration, in a nonlinear dual mass Hamiltonian system, which has 6th order homogeneous polynomial as a nonlinear term, is studied in this paper. The existence, bifurcation, and the orbital stability of periodic motions are to be studied in the phase space. In order to find the analytic expression of the invariant curves in the Poincare Map, which is a mapping of a phase trajectory onto 2 dimensional surface in 4 dimensional phase space, Whittaker's Adelphic Integral, instead of the direct integration of the equations of motion or the Birkhotf-Gustavson (B-G) canonical transformation, is derived for small value of energy. It is revealed that the integral of motion by Adelphic Integral is essentially consistent with the one obtained from the B-G transformation method. The resulting expression of the invariant curves can be used for analyzing the behavior of NNM vibration in the Poincare Map.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.193-196
• /
• 2006

파일 시스템의 안정성에 문제가 생긴 경우, 파일 시스템의 동작이 중단되어 수정 중이던 데이터가 손실되거나 기존 데이터의 복구가 불가능하게 되는 상황이 발생 할 수 있다. 데이터의 종류에는 파일의 데이터와 같이 데이터 자체가 중요한 내용을 담고 있는 것과 파일의 데이터를 관리하기 위한 정보를 담고 있는 데이터가 있는데 후자를 메타데이터라고 한다. 단순히 파일의 데이터가 손실된 경우에 약간의 데이터 손실이 발생할 수는 있지만, 파일 시스템은 정상적으로 동작 할 수 있다. 하지만 메타데이터가 손상된 경우에는 파일 시스템이 볼륨에 접근조차 할 수 없게 되어 볼륨 내의 모든 파일을 접근할 수 없게 된다. 이러한 문제점들을 극복하기 위해 DualFS [8], log-structured 파일 시스템 [10], XFS [9] 등의 다양한 저널링 파일 시스템들이 제안되었다. 그 중 Ext$_3$ 파일 시스템은 가장 안정적이고 치명적인 문제점이 없는 것으로 알려져 있다.[7] 하지만 Ext$_3$ 파일 시스템에서 기본적으로 사용되고 있는 ordered mode 저널링은 메타데이터의 복사가 이루어져야 하기 때문에 속력의 저하가 발생한다. 본 논문에서는 ordered mode의 메타데이터의 복사 작업이 필요 없는 개선된 ordered mode 저널링을 제안한다.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.159-160
• /
• 2015

최근 초기 투자비용은 큰 반면 에너지 이용률은 낮은 UPS(Uninterruptible power supply)를 ESS(Energy storage system)로서 활용하는 하이브리드 ESS에 대한 관심이 커지고 있다. 하이브리드ESS는 비상시 중요부하에 공급할 최소 전력을 제외한 전력을 수요관리로 활용함으로써 UPS에 저장되어 있는 에너지를 비상전원 기능과 수요관리 기능으로 폭넓게 사용할 수 있는 시스템이다. 이 시스템을 구성하는 3개의 PCS를 통합 제어하기 위해 채택한 듀얼코어 기반의 고성능 MCU TMS320F28377D를 이용하면 많은 PWM, ADC포트는 물론 충분한 연산시간 확보가 가능하다. 본 논문에서는 제안하는 하이브리드 ESS의 구성에 대해 소개하고 사용된 제어기의 구조, 각 PCS들을 통합 제어하기 위해 사용한 듀얼코어 기반의 DSP TMS320F28377D에 대해 설명하고자 한다.

• Journal of KIISE:Software and Applications
• /
• v.27 no.11
• /
• pp.1133-1140
• /
• 2000

다중모드 대화에서 나타나는 대용어는 언어만을 사용하는 대화에서 나타나는 것과 비교하여 매우 다른 형태와 특징을 가진다. 그것은 행위나 시각이 대용 행위로 사용될 수 있기 때문이다. 본 논문에서는 터치스크린 인터페이스를 이용한 홈쇼핑 가구점 영역의 다중모드 대화 시스템에서 나타나는 다양한 대용어의 처리 방법을 알아본다. 먼저, 화면 대용어와 참조 대용어를 정의하여 다양한 형태의 대용어를 분류한다. 그리고 각 대용어를 처리할 수 있는 두 가지의 일반적인 방법을 제안한다. 하나는 지시 행위를 수반하거나 생략한 채 발화되어 현재 화면에 나타나 있는 아이템을 참조하는 대용어를 처리하는 단순한 매핑 알고리즘이다. 다른 하나는 다중 모드 대화 시스템을 위해 워커(Walker)의 센터링 알고리즘을 확장한 이중 캐시 구조의 센터링 알고리즘이다. 확장된 센터링 알고리즘은 발화와시각 정보 그리고 화면 전환 시간을 유지할 수 있기 때문에 다중모드 대화에서 발생하는 다양한 대용어를 처리하기에 적합하다. 실험에서 제안된 시스템은 40개의 대화에서 나타난 402개의 대용어(발화당 0.54)중에서 387개를 처리하여 96.3%의 정확도를 보였다.

• Journal of Drive and Control
• /
• v.13 no.2
• /
• pp.1-9
• /
• 2016

In this paper, an elementary force fighting problem was investigated. The problem is encountered when a double-rod type EHA(electro-hydrostatic actuator) is combined with a single-rod type EHA to build a redundant actuator system with synchronized motion. When the rod-side chambers of the two different types of EHAs have the same effective piston areas and are simultaneously pressurized by an external load, the two EHAs behave identically, sharing the external load equally. However, when the piston head-side chamber of the single rod type EHA, having a larger effective area than the rod-side chamber, is pressurized by the external load, an abnormal force fighting between the two EHAs occurs, unless their pump speeds are properly decoupled. In this study, the output drive forces of each EHA were obtained from the cylinder pressure signals and applied to the position control for each EHA to maintain the balance between their pump speeds. Adding minor force difference feedback loops to the position control, the force fighting phenomena could be eliminated and steady state synchronization errors were reduced. The power consumption of the pumps also could be remarkably reduced, avoiding unnecessarily high load pressures to the pumps.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.8
• /
• pp.663-669
• /
• 1994

Decay kinetics of Ga(5s), Ga(5p) and Ga(4d) atoms in Ar were studied by laser induced fluorescence technique. Theground state gallium atoms in the gas phase were generated by pulsed dc discharge of trimethyl gallium and argon mixtures. Both pulsed discharge and YAG-DYE laser system were controlled by a dual channel pulse generator and the delay time between the end of discharge and laser pulses was set 3.0-6.0 ms. The Ga(5s) and Ga(4d) atoms were generated by single photon excitation from the ground state Ga atoms and radiative lifetimes as well as the total quenching rate constants in Ar were obtained from the pressure dependence of the fluorescence decay rates. The Ga(5p) atoms were populated by a two-photon excitation method and the cascade fluorescence from Ga(5s) atoms were analyzed to extract quenching rate constant of Ga(5p) atoms by Ar in addition to radiative lifetimes of Ga(5p) state. The magnitudes of the quenching rate constants by Ar for the low-lying excited states of Ga atoms are 1.6-3$ {\times}10^{-11}cm^3$ molecul$e^{-1}s^{-1}$, which are much larger than those for alkali, alkaline earth and Group 12 metals. Based on the measured rate constants, kinetic simulations were done to assign state-to-state rate constants.

• Steel and Composite Structures
• /
• v.33 no.4
• /
• pp.525-535
• /
• 2019

The seismic performance of steel frames equipped with a particular type of bending dissipative braces (BDBs) having U elements, which has recently been introduced and tested by the authors, is investigated. For this purpose, two structural systems, i.e., simple and dual steel building frames, both with diagonal BDBs and different number of stories, are considered. After providing a design method of this new BDB, the detailed structural models are developed in the OpenSees platform to perform nonlinear dynamic analyses. Seismic performance factors like ductility, overstrength, response modification and deflection amplification factors are calculated using incremental dynamic analysis (IDA). In addition, to assess the damage probability of the structural models, their seismic fragilities are developed. The results show high energy dissipation capacity of both structural systems while the number of U elements needed for the bracing system of each story in the moment frames are less than those in the corresponding non-moment (simple) frames. The average response modification and deflection amplification factors for both structural schemes are obtained about 8.6 and 5.4, respectively, which are slightly larger than the corresponding recommended values of ASCE for the typical buckling-restrained braces (BRBs).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.72-79
• /
• 2008

The weak point of the artificial neural network(ANN) is that it is easy to fall in local minima when it learns too much nonlinear data. Accordingly, the classification ratio must be low. To overcome this weakness, the hybrid method has been proposed. That is, the ANN learns data selectively after detecting the defect position by the support vector machine(SVM). First, the SVM has been used for determination of the defect position and then the magnitude of the defect has been measured by the ANN. In off-design condition, the operation region of the engine is wide and the nonlinearity of learning data increases. The module system, dividing the whole operating region into reasonably small-size sections, has been suggested to solve this problem. In this study, the proposed algorithm has diagnosed the defects of triple components as well as single and dual components of the gas turbine engine in off-design condition.