• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.727-734
• /
• 2005

High-rise residential buildings these days tend to adopt a building frame system as primary earthquake resisting structural system for some architectural reasons. But there exist several ambiguities in designing such building frame systems according to current codes with regards to : the effective stiffness property of RC cracked section in static and dynamic analyses, analytical model to evaluate story drift ratio, and deformation compatibility requirements of frames. The comparative study for these issues by appling KBC 2005 to a typical building frame system shows that demands of member strength and story drift ratio can be different significantly depending on engineer's Interpretation and application of code requirements. And a building frame system can be noneconomical, compared with the dual system, because of higher demands on strength or ductility in both frames and shear walls.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.6
• /
• pp.81-91
• /
• 2013

A novel design process of a parallel multi-flow type air-cooled condenser of a dual-loop waste heat recovery system with Rankine steam cycles for improving the fuel efficiency of gasoline automobiles has been investigated focusing on reduction of the pressure drop inside the micro-tubes. The low temperature condenser plays a role to dissipate heat from the system by condensing the low temperature loop working fluid sufficiently. However, the refrigerant has low evaporation temperature enough to recover the waste from engine coolant of about $100^{\circ}C$ but has small saturation enthalpy so that excessive mass flow rate of the LT working fluid, e.g., over 150 g/s, causes enormously large pressure drop of the working fluid to maintain the heat dissipation performance of more than 20 kW. This paper has dealt with the scheme to design the low temperature condenser that has reduced pressure drop while ensuring the required thermal performance. The number of pass, the arrangement of the tubes of each pass, and the positions of the inlet and outlet ports on the header are most critical parameters affecting the flow uniformity through all the tubes of the condenser. For the purpose of the performance predictions and the parametric study for the LT condenser, we have developed a 1-dimensional user-friendly performance prediction program that calculates feasibly the phase change of the working fluid in the tubes. An example is presented through the proposed design process and compared with an experiment.

• Journal of Korean Library and Information Science Society
• /
• v.8
• /
• pp.155-184
• /
• 1981

The publication of the result of scholarly research is an integral part of the process by which learning is advanced. The university presses, as one of the major scholarly publishers are now confronted with many critical problems, such as the declining unit sales, the explosion of manuscripts, the challenge of new publishing technologies, etc., in performing the role of the scholarly communication system. The purpose of this study is to identify the problems imposed on the university presses and alternative strategies for them. For the study, the related literature to the subject were read, analyzed and synthesized, from which the overall prospect of the problems and alternative strategies are derived. The conclusion of the study can be summarized as follows: (1) The faith of the university should lie in its role to advance scholarly learning through production and dissemination of high-quality knowledge, and the university press should materialize such a faith. (2) The scholarly books, though not the best media of scholarly communication taking a side view of its timeliness and brevity, can perform the function of the best media for the specific subject and readers. (3) The scholarly books as national resource must be published for the scholars demanding them even though the publication can't help depending on the subsidiary fund. (4) For the survival and activation of the university presses, the following strategies should be examined, and put in force if necessary. (a) The role of the foundation su n.0, pporting the university presses should be expanded (b) The Co-operative system among the operations of the presses should be established. (c) It is desirable that the university without the press should participate in the university with the press for both the financial su n.0, pporting and the publicizing its faculty's manuscripts. (d) The positive efforts should be made for the increase of sales copies by implementing the dual-system of publication. (e) It is desirable that 'recording system' should be incorporated in the traditional publication system both for the lightening of financial problems and the explosion of publications. (f) It is necessary that the effective methods of the bibliographical control should be developed for the improvement of the scholarly communication. (g) Any kind of the permanent organization composed of the representatives from all the infrastructures of information industry should be established to study the character and direction of technological changes and to discern the better choice of specific, technologies in the scholarly communication system.

• Korean Journal of Social Welfare
• /
• v.66 no.2
• /
• pp.5-29
• /
• 2014

The purpose of this study is to interpret how the long-term care evaluation system implements in the actual service settings with institutional isomorphism and decoupling based on new-institutional theory. This study conducted in-depth interview with employees engaged in 7 long term care service facilities. Directed qualitative content analysis was used to analyze the data. As a result, unlike the intention of the long-term care evaluation system to improve the efficiency of the organization by market competition, it found that organizations forcibly adapted a evaluation system to rely on government's resources and it results in isomorphism phenomena which is similar between organizations. This results confirmed that the evaluation system has implemented in the direction of enhancing the government's role to standardize and institutionalize the long-term care service rather than improving the efficiency of the organization by market competition. This study also partially found the phenomenon of decoupling between organizational formal structure accompanied by isomorphism and real behaviors. These results suggest that it is required to improve government's evaluation indicators on the issue of inefficiency caused by dual structure of organizations. In addition, this study proposes that government's evaluation index which is reflected the characteristics of care service is necessary for operating.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.150-157
• /
• 2005

This paper presents the simulation modeling and analysis of variable wind speed turbine system(VWTS) using the doubly fed induction generator(DFIG) connected the back to back converter system in the rotor side. In the simulation, using the model system which has the 660[kW] rated power, blade control and the dual converter system are modeled for verifying the control characteristics. The VWTS is controlled by the optimal pitch angle for maximum output power under the rated wind speed, and for the rated output power over the rated wind speed. And also power factor is controlled by the reactive power. To verify the effectiveness of the proposed method, simulation results are compared with the actual data from the V47 VWTS located in Hangwon wind farm in Jeju-Do. According to the comparison of these results, this method shows excellent performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.5925-5932
• /
• 2014

The aim of this study was to develop assessment tools for analyzing society focusing on abilities, not an academic clique. The development of a type of occupational qualification, which is called a working and learning system, for Koreans, can be reliable and acceptable to a variety of society members. This study was conducted by searching for a dual system and examining a qualification system in developed countries. To achieve the goal of this study, the management status according to a type of qualification system was analyzed. In addition, a variety of related laws, related department, testing authority, testing institute, terms of applying for tests, way of testing, committee of testing, testing subjects, criterion for passing tests, a status of qualification test administrated in some developed countries, such as Germany, UK, the USA and Australia, were conducted. The occupational duty of the machine field and education contents are examined by analyzing the occupational duty. In addition, the criterion to solve problems and a way of marking in the field of machines were indicated and an example of written and practical tests is presented. This study makes a blueprint for a qualification system of working and learning at the same time in a national dimension.

• Archives of Craniofacial Surgery
• /
• v.22 no.1
• /
• pp.1-10
• /
• 2021

Botulinum toxin type A (BoNT-A), onabotulinumtoxinA (Botox) was approved by the United States Food and Drug Administration for temporary improvement of glabellar lines in patients 65 years and younger in 2002, and has also been used widely for aesthetic purposes such as hyperhidrosis, body shape contouring, and other noninvasive facial procedures. BoNT-A inhibits presynaptic exocytosis of acetylcholine (ACh)-containing vesicles into the neuromuscular junction at cholinergic nerve endings of the peripheral nervous system, thereby paralyzing skeletal muscles. ACh is the most broadly used neurotransmitter in the somatic nervous system, preganglionic and postganglionic fibers of parasympathetic nerves, and preganglionic fibers or postganglionic sudomotor nerves of sympathetic nerves. The scientific basis for using BoNT-A in various cosmetic procedures is that its function goes beyond the dual role of muscle paralysis and neuromodulation by inhibiting the secretion of ACh. Although the major target organs for aesthetic procedures are facial expression muscles, skeletal body muscles, salivary glands, and sweat glands, which are innervated by the somatic or autonomic nerves of the peripheral cholinergic nerve system, few studies have attempted to directly explain the anatomy of the areas targeted for injection by addressing the neural physiology and rationale for specific aesthetic applications of BoNT-A therapy. In this article, we classify the various cosmetic uses of BoNT-A according to the relevant component of the peripheral nervous system, and describe scientific theories regarding the anatomy and physiology of the cholinergic nervous system. We also review critical physiological factors and conditions influencing the efficacy of BoNT-A for the rational aesthetic use of BoNT-A. We hope that this comprehensive review helps promote management policies to support long-term, safe, successful practice. Furthermore, based on this, we look forward to developing and expanding new advanced indications for the aesthetic use of BoNT-A in the future.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2018-2025
• /
• 2023

In our previous study, we proposed an integrated PG-PET-based imaging method to increase the prediction accuracy for patient dose distributions. The purpose of the present study is to experimentally validate the feasibility of the PG-PET system. Based on the detector geometry optimized in the previous study, we constructed a dual-head PG-PET system consisting of a 16 × 16 GAGG scintillator and KETEK SiPM arrays, BaSO₄ reflectors, and an 8 × 8 parallel-hole tungsten collimator. The performance of this system as equipped with a proof of principle, we measured the PG and positron emission (PE) distributions from a 3 × 6 × 10 cm³ PMMA phantom for a 45 MeV proton beam. The measured depth was about 17 mm and the expected depth was 16 mm in the computation simulation under the same conditions as the measurements. In the comparison result, we can find a 1 mm difference between computation simulation and measurement. In this study, our results show the feasibility of the PG-PET system for in-vivo range verification. However, further study should be followed with the consideration of the typical measurement conditions in the clinic application.

• Journal of Biomedical Engineering Research
• /
• v.44 no.6
• /
• pp.392-403
• /
• 2023

This study presents a new hybrid fNIRS-EEG system to meet the demand for a lightweight and low-cost sleep pattern monitoring device. For multiple-channel configuration, a six-channel electroencephalogram (EEG) and a functional near-infrared spectroscopy (fNIRS) system with eight photodiodes (PD) and four dual-wavelength LEDs are designed. To enhance the convenience of signal measurement, the device is miniaturized into a patch-like form, enabling simultaneous measurement on the forehead. Due to its fully integrated functionality, the developed system is advantageous for performing sleep stage classification with high-temporal and spatial resolution data. This can be realized by utilizing a two-dimensional (2D) brain activation map based on the concentration changes in oxyhemoglobin and deoxyhemoglobin during sleep stage transitions. For the system verification, the phantom model with known optical properties was tested at first, and then the sleep experiment for a human subject was conducted. The experimental results show that the developed system qualifies as a portable hybrid fNIRS-EEG sleep pattern monitoring device.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1778-1780
• /
• 2004

Microwave heating system of KSTAR consists of ECH and LHCD. ECH and LHCD offer the reliability of operation in the beginning of plasma formation and non-inductive current drive for long time steady state operation with maintaining MHD stability, respectively. LHCD demands 5 GHz of frequency and consists of c-band waveguide, 4-port circuitor, dry dummy load, dual directional coupler, E-bend, arc detector. Our system is a lineup type pulse modulator that has 45 kV of output pulse voltage, 90 A of pulse current, 4 us of pulse width. 1:4 step-up pulse transformer, 7 stages of PFN and thyratron tube (E2V, CX1191D) are used in this modulator. The purpose of this paper is to show the modulator design and experimental result.