• Steel and Composite Structures
• /
• v.19 no.3
• /
• pp.569-583
• /
• 2015

Recent years, explosive welding structures have been widely used in many engineering fields. The bonding state detection of explosive welding structures is significant to prevent unscheduled failures and even catastrophic accidents. However, this task still faces challenges due to the complexity of the bonding interface. In this paper, a new method called dual-tree complex wavelet transform based permutation entropy (DTCWT-PE) is proposed to detect bonding state of such structures. Benefiting from the complex analytical wavelet function, the dual-tree complex wavelet transform (DTCWT) has better shift invariance and reduced spectral aliasing compared with the traditional wavelet transform. All those characters are good for characterizing the vibration response signals. Furthermore, as a statistical measure, permutation entropy (PE) quantifies the complexity of non-stationary signals through phase space reconstruction, and thus it can be used as a viable tool to detect the change of bonding state. In order to more accurate identification and detection of bonding state, PE values derived from DTCWT coefficients are proposed to extract the state information from the vibration response signal of explosive welding structure, and then the extracted PE values serve as input vectors of support vector machine (SVM) to identify the bonding state of the structure. The experiments on bonding state detection of explosive welding pipes are presented to illustrate the feasibility and effectiveness of the proposed method.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.1
• /
• pp.49-57
• /
• 2017

IoT can be connected through a single network not only objects which can be connected to existing internet but also objects which has communication capability. This IoT environment will be a huge change to the existing communication paradigm. However, the big security problem must be solved in order to develop further IoT. Security mechanisms reflecting these characteristics should be applied because devices participating in the IoT have low processing ability and low power. In addition, devices which perform abnormal behaviors between objects should be also detected. Therefore, in this paper, we proposed D-IDS technique for efficient detection of malicious attack nodes between devices participating in the IoT. The proposed technique performs the central detection and distribution detection to improve the performance of attack detection. The central detection monitors the entire network traffic at the boundary router using SVM technique and detects abnormal behavior. And the distribution detection combines RSSI value and reliability of node and detects Sybil attack node. The performance of attack detection against malicious nodes is improved through the attack detection process. The superiority of the proposed technique can be verified by experiments.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2006.08a
• /
• pp.144-144
• /
• 2006

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2606-2608
• /
• 2005

In this paper we describe the fault detection methods in a Dual-Redundant Power Controller(DRPC) for Control Rod Control System(CRCS). The DRPC has the function of fault detection for controller itself and power modules. And in this paper we have described the some complex items out of fault detection methods for CRCS. By utilizing the suggested methods, we are convinced that these methods are applied to commercial use before long.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.1
• /
• pp.82-88
• /
• 2009

The output of the encoder is a digital pulse, which is also easy to be connected to a digital controller. There are various angular velocity detecting methods of M, T, and M/T. Each of them has its own properties. There is a common limitation that the angular velocity detection period is strongly dependent on the destination velocity magnitude in case of ultimate low range. They have ultimately long detection period or cannot even detect angular velocity at near zero velocity. This paper proposes a zero velocity detectable sensor algorithm with the dual encoder system. The sensor algorithm is able to keep detection period moderately at near zero velocity and even detect zero velocity within nominal period. It is useful for detecting velocity in case of changing rotational direction at which there occurs zero velocity. In this paper, various experimental results are shown for the algorithm validity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.2
• /
• pp.702-721
• /
• 2012

In the DVB-T2 system with a multiple-input single-output (MISO) transmission mode, Alamouti coded orthogonal frequency division multiplexing (OFDM) signals are transmitted simultaneously from two spatially separated transmitters in a single frequency network (SFN). In such systems, each transmit-receive link may have a distinct carrier frequency offset (CFO) due to the Doppler shift and/or frequency mismatch between the local oscillators. Thus, the received signal experiences dual CFOs. This not only causes dual phase errors in desired data but also introduces inter-carrier interference (ICI), which cannot be removed completely by simply performing a CFO compensation. To overcome this problem, this paper proposes an iterative detection with dual phase errors compensation technique. In addition, we propose a successive-iterative ICI cancellation technique. This technique successively eliminates ICI in the initial iteration by exploiting pre-detected data pairs. Then, in subsequent iterations, it performs a fine interference cancellation using a priori information, iteratively fed back from the channel decoder. In contrast to previous works, the proposed techniques do not require estimates of dual CFOs. Their performances are evaluated via a full DVB-T2 simulator. Simulation results show that the DVB-T2 receiver equipped with the proposed dual phase errors compensation and the successive-iterative ICI cancellation techniques achieves almost the same performance as ideal dual CFOs-free systems, even for large dual CFOs.

• Korean Journal of Veterinary Service
• /
• v.30 no.4
• /
• pp.527-532
• /
• 2007

In present study, we described the reliability of the dual priming oligonucleotide (DPO) multiplex polymerase chain reaction (PCR) for the detection of Mycobacterium tuberculosis complex (MTC) and non-Mycobacterium tuberculosis (NMT) in blood samples of the Korea native cattle, Hanwoo. Among 340 samples 22 (6.5%) were positive in using DPO multiplex PCR, 21 (6.2%) were positive in PCR. The relative agreement between 2 tests was 99.7%, and the agreement quotient (kappa), was 0.95 (excellent). In these results, we demonstrated the successful application of DPO multiplex PCR for the diagnosis of bovine tuberculosis in Hanwoo. Multiplex PCR, using DPO primers, can be useful for the simple diagnosis of bovine tuberculosis in bovine blood samples.

• The Journal of Korea Robotics Society
• /
• v.9 no.3
• /
• pp.140-146
• /
• 2014

This paper introduces a dual-arm robot painter system which is capable of sketching a camera-captured image with short line segments. To express various curved edges in the image by combining line segments, we first apply edge detection algorithm to the entire image, split the edged image into small boxed pieces, and then apply Hough Transformation to each piece so that the edges inside the piece can be approximated with short line segments. To draw the picture within a reasonable time, we designed a simple dual-arm robot system and controlled both arms concurrently according to linear interpolation algorithm. From the experiments, we could verify that simple linear motions can describe various images effectively with a unique brush style.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.3
• /
• pp.215-220
• /
• 2020

This paper deal with estimating the direction of arrival (DOA) of GNSS signal using two antennae for spoofing detection. A technique for estimating the azimuth angle of a received signal by applying the interferometer method to the GPS carrier signal is proposed. The experiment assumes two antennas placed on the earth's surface and estimates the azimuth angle when only GPS signal are received without spoofing signal. The proposed method confirmed the availability through GPS satellite placement simulation and experiments using a dual antenna GPS receiver. In this case of using dual antenna, an azimuth angle ambiguity of the received signal occurs with respect to the baseline between two antennas. For this reason, the accurate azimuth angle estimation is limits, but it can be used for deception by cross-validating the ambiguity.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.4
• /
• pp.81-88
• /
• 2001

We present a new digital phase measuring method for heterodyne optical interferometry, which providers high measuring speed up to 6 m/s with a fine displacement resolution of 0.1 nanometer. The key idea is combining two distinctive digital phase measuring techniques with mutually complementary characteristics to earth other one is counting the Doppler shift frequency counting with 20 MHz beat frequency for high-velocity measurement and the other is the synchronous phase demodulation with 2.0 kHz beat frequency for extremely fine displacement resolution. The two techniques are operated in switching mode in accordance wish the object speed in a synchronized way. Experimental results prove that the proposed dual mode phase measuring scheme is realized with a set of relatively simple electronic circuits of beat frequency shifting, heterodyne phase detection. and low-pass filtering.