• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.6
• /
• pp.788-794
• /
• 1985

A study on the number density in a dual beam LDV is carried out with moving particles of various irregular arrangements. Ratious of the particle diameter to the particle to the fringe Spacing are D/.delta. = 0.3, 0.5, 1.0 and 1.5. In the case of the small number of moving particles(N<10), the visibility is influenced much by the difference of the phase of particles for one side fringe and the change in visibility is shown remarkable. In the case of the larger number of particles, the decreasing rate for visibility on the graph is smooth because the effect of the phase difference of particles is decreased by more unitorm distribution of particles over fringes. And the formula of the number density on the basis of probability is fairly compared with experimental values.

• Steel and Composite Structures
• /
• v.47 no.3
• /
• pp.315-337
• /
• 2023

The steel structure is an assembly of individual structural members joined together by connections. The connections are the focal point to transfer the forces which is susceptible to damage easily. It is challenging to replace the affected connection parts after an earthquake. Hence, steel plates are utilised as a structural fuse that absorbs connection forces and fails first. The objective of the present research is to develop a beam-column end plate connection with single and dual fuse and study the effect of single fuse, dual fuse and combined action of fuse and damper. In this research, seismic resilient beam-column end plate connection is developed in the form of structural fuse. The novel connection consists of one main fuse was placed horizontally and secondary fuse was placed vertically over main fuse. The specimens are fabricated with the variation in number of fuse (single and dual) and position of fuse (beam flange top and bottom). From the fabricated ten specimens five specimens were loaded monotonically and five cyclically. The experimental results are compared with Finite Element Analysis results of Arunkumar and Umamaheswari (2022). The results are critically assessed in the aspect of moment-rotation behaviour, strain in connection components, connection stiffness, energy dissipation characteristics and ductility. While comparing the performance of total five specimens, the connection with fuse exhibited superior performance than the conventional connection. An equation is proposed for the moment of resistance of end-plate connection without and with structural fuse.

• Progress in Medical Physics
• /
• v.27 no.1
• /
• pp.8-13
• /
• 2016

Dual energy cone-beam CT can distinguish two materials with different atomic compositions. The principle of dual energy cone-beam CT based on modulation layer is that higher energy spectrum can be acquired at blocked x-ray window. To evaluate the possibility of modulation layer based dual energy cone-beam CT, we analyzed x-ray spectrum for various thicknesses of modulation layers by Monte Carlo simulation. To compare with the results of simulation, the experiment was performed on prototype cone-beam CT for 50~100 kVp with CdTe XR-100T detector. As the result of comparing, the mean energy of energy spectrum for 80 kVp are well matched with that of simulation. The mean energy of energy spectrum for 80 and 120 kVp were increased as 1.67 and 1.52 times by 2.0 mm modulation layer, respectively. We realized that the virtual dual energy x-ray source can be generated by modulation layer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.239-242
• /
• 2016

In this paper, we proposed the dual curved lens of concave type. HDPE (High Density Polyethylene) used to fabricate the dual curved lens. The dual curved lens consisted of two concave structures. Role of two concave structures is to beam uniform and expansion. A small concave structure has the greater curvature than big concave structure. The dual curved lens will apply to millimeter imaging system. We measured the dual curved lens performance using 250 GHz VDI source. And we simulated the dual curved lens using ZEMAX. Fabricated lens have a good performance for beam uniform and expansion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1056-1063
• /
• 2005

In this paper, we develop a dual beam automotive laser radar system which improve the defect of conventional unipolar one beam laser scheme. We introduce an SNR improving method using bipolar signal synthesizing scheme from two unipolar signals at the receiving unit via differential structure by allocating bipolar m-sequence into the two laser wavelengths, which have similar property like 2-D OOC, and investigate its performance. Simulation results show that the proposed dual beam scheme can have 3dB SNR improvement as compared with conventional unipolar signaling laser radar system. Also, we show the simple interference rejection scheme using differential structures. The proposed scheme have a merit to obtain additional 3dB SNR gain applied into the excellent results based on unipolar optical signal studied lately.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.152-158
• /
• 2009

Total Skin Electron Beam Therapy (TSEBT) of linear accelerator has become use so as to be useful, 2~9 MeV of energy territories came to be used with mycosis fungoides and cutaneous lymphomas in the superficial lesion treatment which covers the major portion of the body. I treat a patient to Stanford technique in this study, and it is $60^{\circ}$ around the patients whom Stanford technique irradiated electronic beam to a linear accelerator in horizontal directions and there is a way a standard of TSEBT treat it to six located field (anterior, posterior, and four obliques) becoming. An each field does horizontally it and consist to beam of the two component which fitted the center to a suitable angle. a patient treats it to three dual field a day in order to make short treatment time. when a first day, we treat one dual field at anterior position and two dual field at posterior position. when the second day, treat one dual field at posterior position and two dual field at anterior position. Therefore, six dual field is finished in perfect periodic two days. we made cylindrical acrylic phantom, and I inserted a dosimeter film between phantom. in order to measure a dose distribution calculation before treat a patient, and a patient checked it in six field directions that got from a treatment. It is after that thermoluminescent dosimetry (TLD) as it uses Rando phantom and then measurement dose distribution in six field directions after attaching at chest, the right and left flank, a back after irradiation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.172-172
• /
• 2016

Dual-beam experiments (Focused ion beam - Orientation mapping microstructure, FIB-OIM) is a widely used experimental tool because this experiments tool available alternates between automated serial sectioning and EBSD with the help of dual beams. We investigated the reconstruction procedure for analysis tool which three-dimensional internal microstructure using Ni superalloy(IN100) and ZrO2. As a results, we observed annealing twin boundary each layer in Ni superalloy(IN100) and fairly isotropic internal microstructure in ZrO2 using marching cubes algorithm. According to these results, this procedure is reconstructed well and we gained ability to arrange the EBSD map and internal microstructure.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.251-254
• /
• 2003

In recent years, shearogrpahy has significantly improved capabilities In the areas of unbend and separation detection in tires. Although shearography has many advantages fur qualitative evaluation, the technique remains the problem of quantitative analysis of inside defects, because shearography needs several effective factors including the amount of shearing, shearine direction and induced load, which exist as barrier for the quantitative analysis of inside defects. Since the factors are highly dependent on inspectors skill and also affect the in-situ workability. The factors were optimized and the size of cracks inside of pipeline and tire has been quantitatively determined.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1997.07a
• /
• pp.36-36
• /
• 1997

• Journal of Welding and Joining
• /
• v.31 no.4
• /
• pp.23-27
• /
• 2013

Laser heat source was used for automotive interior and exterior parts to reduce weights. Typically, 900's nm wavelength of laser has been widely used for polymer joining, however, the transmittance of the laser beam thorough clear polymers such as PMMA or PC has been an issue to overcome. To solve this issue, 1,940nm laser was applied on the clear polymer for the better absorption and 900nm laser beam was used for main laser for the joining. Conventional Gaussian or Elliptical heat source approximation has limitation in polymer which had deeper skin depth where major laser beam absorbs. To accurately simulate the physical laser beam absorption and joining optical properties were experimentally measured for the computer FEM simulation. The simulation results showed close correlation between theoretical and experimental results. The developed laser process is expected to increase productivity and gap closing which can cause failure of joining in laser material processing.