• 콘크리트학회지
• /
• 제9권1호
• /
• pp.143-151
• /
• 1997

전기로 집진 분진상의 중금속(Pb, $Cr^{6+}$, Cu, Cd, Zn)을 함침시킨 규조토를 열처리방법($750^{\circ}C$-30분)으로 활성화하였다. 활성규조토로 일반시멘트 모르터의 시멘트양을 중량비로 0%, 2.5%, 5.0%, 10%, 20%까지 대체하고 압축강도와 화학저항성을 조사하였다. 화학저항성 조사에는 습윤건조반복실험(Wetting /Drying Cycle)과 화학침식저항성($H_2SO_4,\; CaCl_2,\; MgSO_4$)이 포함되었다. 결과에 의하면 일반시멘트 모르터에 활성규조토를 시멘트에 10%까지 치환하여 갈수록 압축강도(28일)는 증가하였다. 최고의 압축강도는 활성규조토가 10%까지 치환하였을 때 $496kgf/cm^2$이었으며, 활성규조토가 전혀 혼합되지 아니한 시멘트 모르터의 압축강도($391kgf/cm^2$)보다 약 275까지 증가되었다. 이때 중금속들은 99% 이상의 고정율을 보였으며 Wet/Dry cycle 및 화학침식저항성에서도 활성규조토가 혼합된 시멘트 모르터가 일반 시멘트 모르터보다 훨씬 높은 저항성을 보였다.

• 한국지반공학회논문집
• /
• 제33권4호
• /
• pp.25-34
• /
• 2017

불포화상태 지반의 흡수력과 응력변화를 반영한 토사사면의 전체 안정성 평가에서 매우 중요한 상태평가 입력변수로 함수특성곡선이 활용되고 있다. 함수특성의 경로의존성은 일반적으로 건조와 습윤과정으로 이력현상을 내포하는데 현장계측결과는 주로 실내실험의 습윤과정에 가깝게 나타난다. 본 연구에서는 이를 비정상류 해석에 적용하여 해석과 현장 계측된 결과들을 비교 검토하였다. 또한 심도가 증가할수록 강우의 영향이 작고 습윤과정을 적용해 산정된 값에 근접하였다. 따라서 불포화 토사사면 해석 시에 경로의존 함수특성곡선을 적용하여 안정성을 판단하는 것이 보다 합리적인 결과로 판단된다.

• Geomechanics and Engineering
• /
• 제23권4호
• /
• pp.339-349
• /
• 2020

This study investigates the feasibility of using the results of the UPV (ultrasonic pulse velocity) test to assess the UCS (unconfined compressive strength) of unsaturated soil. A series of laboratory tests was conducted on samples of unsaturated lateritic soils of northern Taiwan. Specifically, the unconfined compressive test was combined with the pressure plate test to obtain the unconfined compressive strength and its matric suction (s) of the samples. Soil samples were first compacted at the designated water content and subsequently subjected to the wetting process for saturation and the following drying process to its target suction using the apparatus developed by the authors. The correlations among the UCS, s and UPV were studied. The test results show that both the UCS and UPV significantly increased with the matric suction regardless of the initial compaction condition, but neither the UCS nor UPV obviously varied when the matric suction was less than the air-entry value. In addition, the UCS approximately linearly increased with increasing UPV. According to the investigation of the test results, simplified methods to estimate the UCS using the UPV or matric suction were established. Furthermore, an empirical formula of the matric suction calculated from the UPV was proposed. From the comparison between the predicted values and the test results, the MAPE values of UCS were 4.52-9.98% and were less than 10%, and the MAPE value of matric suction was 17.3% and in the range of 10-20%. Thus, the established formulas have good forecasting accuracy and may be applied to the stability analysis of the unsaturated soil slope. However, further study is warranted for validation.

• 한국농촌생활과학회지
• /
• 제8권2호
• /
• pp.73-81
• /
• 1997

Parsimon juice dyeing is the one of the most popular natural dyeing methods which have been done traditionally among the farmers. The clothes dyed with parsimon juice has several merits, that is, it become much more durable, cool, easy to wash and wear after dyeing and these merits are the reason why people likes to wear the parsimon juice dyeing clothes as work wear. Especially in Cheju province, parsimon juice clothes became a folk costume and many people still enjoy wearing it in the hot summer days. But one of the demerits of parsimon dyeing is that the possible period of dyeing is very short. So, if parsimon juice dyeing could be done with the preserved parsimon juice, it would be possible to enlength the period. With this idea, we compared the color and colorfastness of fabrics which were dyed with 4 kinds of parsimon juice. The experimental parsimon juice 96-8 was preserved during 13 months, 96-9 was 12 months, 97-8 was 1 month and 97-9 was not preserved one. The experimental fabrics were cotton, silk. nylon and polyester fabrics. The results were as follows ; 1. The colors of fabrics dyed with experimental parsimon juice 96-9, 97-8, 97-9 were yellow-red and dyeing states were good. But the colors of fabrics dyed with 96-8 were dark and the state were bad, because the color of experimental parsimon juice 96-8 was changed during preservation. 2. The best state of dyeing could see in the fabrics dyed with experimental parsimon juice 97-8, although that was preserved 1 month. 3. There were differences of color between experimental fabrics dyed with same juice and the colors were thicker in cotton and silk than in nylon and polyester fabrics. 4. During wetting and drying process, the color changes in fabrics dyed with no preserved one were more than in fabrics dyed with preserved ones. 5. The color fastness to the light of the dyed fabrics was over 4, to the acidic perspiration was 3~4 or 4~5, to the alkaline perspiration was 2, 3 or 3~4 and to the washing was 1~2. There was no significant difference in colorfastness between the 96-9 dyed fabrics and 97-9 dyed fabrics.

• 한국해안해양공학회지
• /
• 제19권3호
• /
• pp.253-265
• /
• 2007

본 연구의 대상영역인 남해안의 조위 및 조류 수치모의를 위해 조석 보정용 모델인 NAO.99의 기존결과를 외해 개방경계 조건에 적용하였다. 조간대를 고려할 수 있고 $\sigma$-좌표계를 사용하는 EFDC 모형을 이용하여 2 km의 직교 정격자와 $0.5\sim2.0km$의 가변직교격자를 사용한 두 개의 격자망을 구축하였다. 조위수치모의 결과에서 예측값과 국립해양조사원 조위검조소의 관측값이 잘 일치하였으며 남해안 동측에서 서측으로의 조석의 전파를 보여주었다. 검증 결과 격자크기가 감소할수록 조위관측 자료와 더 높은 상관관계를 보였으며 0.5 km의 격자크기로 인한 수치모의 결과가 내만의 협수로 및 지형의 영향을 크게 받는 조류를 다소 과소 산정하는 경향을 가지는 반면에 넓은 수로 및 외해역 자료의 경우에는 2 km 격자로 조류의 적절한 재현이 가능하였다.

• 한국해안·해양공학회논문집
• /
• 제21권2호
• /
• pp.164-173
• /
• 2009

상용 해수유동 모형인 MIKE21 모형의 범람모의 적용성을 평가하기 위하여 월류량 산정기법이 적용된 해일범람모형과 함께 마산만에 적용하였다. 두 모형 모두 관측된 침수범위 및 침수고와 거의 일치하는 결과를 보여 정밀격자의 해일범람모형으로써의 적용성을 확인할 수 있었다. 특히 조간대 모의기법을 확장적용한 MIKE21 모형의 결과가 범람모형의 결과에 비해 뒤지지 않는 결과를 보여 범람에의 적용성은 매우 높은 것으로 판단된다. 또한 선행연구에서 도출된 가상태풍을 모의한 결과, 침수범위는 MAEMI 내습시와 거의 유사한 반면 침수고가 증가하는 것으로 모의되었다.

• 펄프종이기술
• /
• 제45권4호
• /
• pp.52-64
• /
• 2013

This study was carried out to investigate the characteristics of starch paste which was used for the conservation of paper properties. Three kinds of commercial corn starch and five kinds of fermented wheat starch were examined on the contents of amylose and amylopectin, shapes of particles, and viscosity and pH of paste. And adhesive strength on the drying, accelerated aging, and wetting treatments were measured. The contents of amylopectin of oxidized corn starch were higher those of cationic corn starch, unmodified corn starch, and fermented wheat flour. In case of fermented wheat flour, increasing of a fermentation period was resulted in increasing of amylopectin contents. The particle shapes of commercial corn starch showed with a uniform polygon, but fermented wheat flour showed with a mixture of small and large oval types. The viscosity of oxidized corn starch were very lower those of cationic corn starch and unmodified corn starch. And increasing of a fermentation period of wheat flour was resulted in increasing of viscosity. The pH of commercial corn starch were 3.6-7.5 and fermented wheat flour were 3.6-5.2. Through the examination on the nature and adhesive strength of starch paste, the oxidized corn starch 60 cps which is the name of products and wheat flour which had fermented for 5 years were considered that most suitable for conservation of paper properties.

• 식물병연구
• /
• 제7권3호
• /
• pp.150-154
• /
• 2001

세균성벼알마름병의 발생 예측 모델을 만들기 위하여 출수기의 기상 환경과 병 발생과의 관계를 자료분석(1992~2000)과 온실 및 포장시험을 통해 조사하였다. 세균성벼알마름병의 발생이 많은 해는 '94, '95, '98, 2000년이었고, 중만생종 출수기인 8월 상.중순에 고온이 지속되면서 연속강우가 많았다. 반면 병 발생이 적었던 '93년은 강우량과 강우일수는 많았으나 저온이었고, '97년에는 온도는 높았으나 강우가 적은 경향이었다. 출수기에 접종 후 습실처리 하였을 때(24시간 이상) $10^2$cfu/ml에서부터 발병하기 시작하여 접종농도가 높을수록 발병도가 높아져 $10^{8}$ cfu/ml에서는 86.1%의 발병도를 보였다. 습실처리를 하지 않은 경우에는 $10^{8}$ cfu/ml에서만 12.5% 발병하였다. 또한 발병도가 증가함에 따라 천립중과 등숙률이 현저히 감소하였다.

• 한국토양비료학회지
• /
• 제48권3호
• /
• pp.189-193
• /
• 2015

Bad drainage problems from paddy fields adjacent to roads are caused by higher constructed roads which change topography of paddy fields to concave topography and artificial pan to prevent road erosion when road constructions are occurred. This study investigated effects of topography changes on soils by road constructions. Soil samples were investigated by physico-chemical analyses and micromorphology analyses from representative soil profile of Sachon series and soil samples. The characteristics of Sachon series that were adjacent to roads were fewer redoximorphic features (RMF) and increase in grey layers than the original Sachon series. The characteristics of Yecheon Series were shown from Jeollanamdo - Suncheon > Chungchungnamdo - Cheonan > Gangwondo - Wonju. Mosaic speckles were shown from micromorphological analyses because of repeat of shrink and expansion by wetting and drying. The location of graying in soil clods were found from coarse stone blocks to fine stone blocks and color changes of composed particles were also found.

• 패션비즈니스
• /
• 제13권2호
• /
• pp.78-86
• /
• 2009

When scouring and contraction finishing at $90^{\circ}C$ using Relaxer or Rotary Washer contraction and weight loss ratio in warp and weft directions were excellent. Also surface state of fabric after drying or sanding treatment was excellent without crease. Low melting polyester fabric showed a complete melting bond by heat setting(P/S) at above $160^{\circ}C$. The alkali hydrolysis reaction of polyester showed the breakpoint in the weight loss behavior test, polyester yarn showed a breakpoint ranging from 25% to 28%. This is due to the difference of the hydrolysis rate between regular polyester and soluble polyester. Initially the soluble polyester was eluted and micro-fibrillized 5 times faster than a regular polyester. At a later time, a regular polyester was reduced weight to impart a proper flexibility and drape property to the fabric. As a result of surface sanding finishing, the surface of interior fabric showed a surface state most stabilized when using Mesh No. 220 in mono 0.2d after elution finishing. When the rotation direction of sanding roller was pro-, pro-, pro-, and retro-direction, a directional effect of tuft was not shown, a writing effect as suede was exhibited and a surface state was even. Sublimation fastness was 3-4 class for polyester and 2-4 class for nylon. Light fastness 3-4 class after lapse of 100 hours and 2-4 class after lapse of 160 hours. Abrasion fastness was 3-4 class on wet and 4-5 class on dry Laundry fastness was 2-4 class. As such, the abrasion fastness is slightly reduced upon wetting and the use thereof for interior is excellent, whereas laundry fastness is slightly lowered.