• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.654-659
• /
• 2016

This study was designed to compare the quality characteristics of spray-dried (SD) and freeze-dried (FD) Pueraria thunbergiana extracts powder hot water extracts. Quality characteristics of the SD and FD powder including moisture content, color value, water absorption index, water solubility index, dynamic angle and antioxidant activities were evaluated. The moisture content of SD powder (1.50%) was lower than that of FD powder (2.92%). $L^*$ and $b^*$ values of SD powder was lower than of FD powder. The water absorption index was higher in FD powder (1.40) and water solubility index in SD powder (94.10%) was higher than that FD powder (90.69%). Dynamic angle of SD powder ($36.46^{\circ}$) was higher than that of FD powder ($33.30^{\circ}$). The DPPH radical scavenging activities of 5 mg/mL solution of SD powder and FD powder were 85.38 mg/mL, 59.38 mg/mL, respectively. And, the same trend was observed for the ABTS radical scavenging activities of the drying powder as that observed for their DPPH radical scavenging activities. There were relatively higher contents of phenolic compounds in SD powders than in FD powders. In conclusion, spray-dried Pueraria thunbergiana extracts showed the high WSI, polyphenol, DPPH and ABTS radical scavenging activities and low moisture content and dynamic angle than freeze dried powder.

• Journal of Powder Materials
• /
• v.27 no.3
• /
• pp.241-246
• /
• 2020

To develop Gastrodia elata (GE)-loaded particles for herbal extract dosage forms, various GE-loaded particles containing dextrin, isomalt, maltodextrin, and silicon dioxide as solidifying carriers in the GE water extract are prepared using the spray drying method. Their physical properties are evaluated using the repose angle, Hausner ratio, Carr's index, weight increase rate at 40℃/75% RH condition, and scanning electron microscopy (SEM). Particles made of dextrin improve the fluidity, compressibility, and water stability. In addition, 2% silicon dioxide increases the fluidity and moisture stability. The best flowability and compressibility of GE-loaded particles are observed with TP, dextrin, and silicon dioxide amounts in the ratio of 6/4/0.2 (34.29 ± 2.86°, 1.48 ± 0.03, and 38.29 ± 2.39%, repose angle, Hausner Ratio, and Carr's index, respectively) and moisture stability with a 2% weight increase rate for 14 h at 40℃/75% RH condition. Therefore, our results suggest that the particles prepared by the spray drying method with dextrin and 2% silicon dioxide can be used as powerful particles to improve the flowability, compressibility, and moisture stability of GE.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.78-82
• /
• 1984

Effects of various drying conditions of agar gel on the physico-chemical properties of dried agar were investigated. For drying of the agar gel$(1.0{\times}1.0{\times}34.0cm)$ by means of sun drying, simple solar drying, hot-air drying ($30^{\circ}C$, control, natural convection), hot-air drying ($30^{\circ}C$, pretreatment, natural convection) and freeze drying, it took 96, 75, 67, 50 and 21 hours, respectively. The gel strengths of dried agar gel prepared by sun drying, solar drying, freeze drying and spray drying were320, 370, 270 and $360g/cm^2$, respectively and that of hot air-dried agar gel was influenced by drying temperature, pretreatment an mode of heat transfer. The gel strength, the gelation temperature and other quality index of spray-dried agar were not inferior to those of sun-dried agar, but it was not expected to be economical because of it recovery rate. In case of hot air drying, the gel strength value of agar increased as the drying rate increased. No significant differences among various products were noted in the gelation temperature, the melting temperature, the ash and $SO_3$ content.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.428-435
• /
• 1994

Properties of modified rice starches prepared in drum drying and extrusion were evaluated to use for effective utilization. Blue value was the lowest (p<0.05) for waxy rice starch and L value was decreased after modification of starches. Water solubility index was the highest for modified starches prepared in extrusion, while water absorption index was the highest for modified starches prepared in drum drying. Cold-Water-Solubility was the highest (p<0.05) for modified rice starch prepared in drum drying (RD). Consistency index of RD was drastically increased as shear rate increased and yield stress was the highest for RD. Results of Gel Permeation Chromatography showed that starch components were broken down into lower molecular weight materials and amylose are degraded by modification. Changes in the X-ray diffrectometry pattern indicated the transformation of granule into an amorphous state during modification and illustrated V-type.

• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.392-398
• /
• 1988

Gelatinized rice flours were prepared by drum drying at different moisture contents of slurry made from dry milled and wet milled rice flours. Milled rice samples were prepared from the Chuchung and the Samgang varieties. Degree of gelatinization of drum-dried rice flours revealed over 92% at 60% moisture content of wet milled rice flours and 80% moisture content of dry milled ones. With regards to amylogram and rheological properties, drum-dried rice flours prepared from wet milled raw materials showed higher viscosity than from dry milled ones. Increasing water contents in the slurry increased water absorption index(WAI) and decreased water solubility index(WSI). Hunter's color values of drum-dried rice flour at high moisture contents showed higher L values and lower b values. For the preparation of gelatinized rice flours by drum drying process, the higher water content caused more gelatinized network structure of rice starch in scanning electron micrographs. With regards to farinogram properties of dough with drum-dried rice flours and wheat flours in mixing ratio of 1 to 9 by weight, drum-dried rice flours made from wet milled raw rice flours revealed higher MTI than from dry milled ones.

• Korean Journal of Food Science and Technology
• /
• v.43 no.6
• /
• pp.696-701
• /
• 2011

To evaluate the processing adaptability of taro flours, the physicochemical properties of taro flour with different drying, roasting and steaming conditions were investigated. The moisture content and total dietary fiber were decreased as temperature increased with hot-air drying. Freeze-dried taro flours showed the highest vitamin C contents. Taro flours made by freeze-drying and hot-air drying showed significantly higher total dietary fiber content than those with roasting and steaming process. Steamed taro flours had the highest water absorption index, while hot-air dried and freeze dried taro flours had the highest water solubility index. No differences were displayed in the differential scanning calorimetry (DSC) thermal characteristics among hot-air dried and freeze dried taro flours. Roasted taro displayed decreased onset temperature and peak temperature as roasting temperature increased. Using a rapid visco-analyzer, the peak viscosity, through viscosity, and final viscosity of dried and steamed taro flours were higher than roasted taro flours, whereas the set back value, which is a prediction of retrogradation, decreased with steaming processing. From those results, it could be concluded that hotair dried taro flours, which have high gelatinization viscosity, are beneficial in imparting viscosity to dough products and hot-air drying after steaming taro flours, which retard retrogradation, is good for porridge and flake base products.

• Journal of the Korean Society of Tobacco Science
• /
• v.8 no.1
• /
• pp.41-48
• /
• 1986

This experiment was carries out to study on the effect of temperature raising rate to chemical composition of tobacco leaves during the midrib drying stage of flue-curing. The results were as follows : In the case of the temperature raising rate became more rapidly during midrib drying stage. It had a tendency to increase in oxailic acid, succinlc acid, ammonia, polyphenol; there was a large loss of total sugar, reducing sugar, malic acid, palmitic acid and linolenic acid; leaf color became more reddish; the leaf quality index value decreased, thereby the quality of external appearance deteriorated. It is desirable that the temperature raising rate had to be more slowly.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.2
• /
• pp.168-178
• /
• 1983

Influence of several dehydration treatments on original structure and water behavior in the process of drying were investigated employing three hawaiian volcanic ash soils and four synthetic minerals. These three soils were developed under different rainfall condition and contained three different amount of amorphous materials in them. Measurement of water losses by oven drying at $105^{\circ}C$, $P_2O_5$ drying, freeze drying, and critical point drying revealed that more water losses were noted by oven drying than by three other drying techniques and the differences of water losses between oven and $P_2O_5$-drying were closely related to amoun: of amorphous materials in them, showing the order of Kaiwiki > Hilo > Kawaihae. This indicates that dehydration of amorphous materials by elevated temperature ($105^{\circ}C$) excluded water beyond that in the adsorbed (hygroscopic) state. The effect of dehydration treatments on initial structure was visualized by scanning electron microscopy. The micrographs showed that oven-and $P_2O_5$-dried samples formed into large mass of sub-angular blocky, dense, and closed crumbs, while the freeze dried and critical point dried samples resulted in less shrinkage, and small, fluffy and open spongy structure. However, critical point drying technique produced bulkier, softer, and greater open structure samples than even freeze drying. Additional Index Words: original structure, synthetic minerals, critical point drying, $P_2O_5$ drying. 1. This is a part of author's Ph.D. dissertation submitted to the University of Hawaii, Honolulu, Hawaii 96822 in 1979. 2. Professor of Agricultural Chemistry, Korea University.

• Korean Journal of Food Science and Technology
• /
• v.2 no.2
• /
• pp.49-55
• /
• 1970

In preparation of textured soybean protein, drying process of the isolated protein affected its gelling property and other related characteristics such as water holding capacity and viscosity. In model systems, denaturation of the protein, as determined in terms of nitrogen solubility index (NSI), was appeared to be a parameter of the gel strength of soybean protein isolate. The gel strength was maximum when the protein was denatured properly during drying process of which the NSI was 43 in this experiment and decreased at either the higher or the lower NSI. It indicated that proper denaturation of the protein during drying operation is advantagous for the preparation of textured soybean protein but not neccesary to make highly undenatured one.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.3
• /
• pp.572-578
• /
• 1999

This study was conducted to investigate processing condition and characteristics of chestnut paste. The kinds of chestnut powder processed with blanching and drying of raw material were four named RH(not blanched, hot air dried), RF(not blanched, freeze dried), BH(blanched, hot air dried) and BF(blanched, freeze dried). Blanching affected the reduction of drying time in chestnut. Water absorption index of the blanched samples were higher than the nonblanched. Blanching affected the viscosity of pastes when water was added to process paste also, but drying methods did not affected to it. The proper ratio of water to the powder to process paste was 1.3 to 1.5 times in RH and RF, whereas 2.7 times in BH and BF by sensory evaluation. Soluble tannin content of paste was higher in RF and RH paste than BF and BH. Vitamin C content was the highest(88.49mg/100g) in RF paste and reducing sugar content was the highest in RF paste. Hunter's L and a values were the highest in BF and RH pastes, respectively, among the all paste samples. Volatile compounds detected from chestnutpastes were hydrocarbons, alcohols, phenols, ketones. The major volatile compound in all the pastes was 2,6 bis(1,1 dimethylethyl) 4 methyl phenol.