• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.37-45
• /
• 2018

An electric vehicle is an environmentally friendly vehicle because there is no exhaust gas, unlike gasoline automobiles. On the other hand, because the electric vehicle is driven by electric power charged in batteries, the distance to go through a single charge depends on the energy density of the batteries. Therefore, a lithium-ion battery with a high energy density is a good candidate for batteries in electric vehicles. Because the electrode is an essential component that governs the efficiency of a lithium-ion battery, the electrode manufacturing process plays a vital role in the entire production process of lithium-ion batteries. In particular, the drying process during the electrode manufacturing process is a critical process that has a significant influence on the performance. This paper proposes an innovative process for improving the efficiency and productivity of the drying process in electrode manufacturing and describe the equipment design method and development results. In particular, the design procedure and development method for enhancing the electrode adhesion power, atmospheric pressure superheated steam drying technology, and drying furnace slimming technologies are presented. As a result, high-speed drying technology was developed for battery electrodes through the world's first turbo dryer technology for mass production using open/integrated atmospheric pressure superheated steam. Compared to the conventional drying process, the drying furnace improved the productivity (Dry Lead Time $0.7min{\rightarrow}0.5min$).

• Journal of the Korean Society of Food Culture
• /
• v.35 no.6
• /
• pp.590-596
• /
• 2020

Buckwheat (Fagopyrum species) has long been an excellent functional food. Besides, buckwheat sprouts contain various functional substances. In this study, we investigated the antioxidant activity of buckwheat sprouts in the context of cultivars harvested after different cultivation periods (0, 3, 5, 7, 9, 13, and 15 days after planting). Buckwheat sprouts were cultivated at 25℃ for up to 15 days and then extracted with ethanol. Antioxidant components were then extracted from sprouts and leaves using a freeze dryer. The total polyphenolic content, flavonoid content, and antioxidant activity were then analyzed. The total polyphenol content increased from 32.26 mg GA eq/100 g for raw buckwheat to 114.75 mg GA eq/100 g after 7 days of cultivation. Also, the flavonoid content increased from 20.61 mg catechin eq/100 g (0 days) to 56.54 mg/g after 9 days of cultivation. The DPPH radical scavenging activity (concentration of extract at 0.25 mg/mL) increased from 7.89% at day 0 to 53.48% after 9 days of cultivation. Additionally, the ABTS radical scavenging activity increased from 10.26% at day 0 to 32.89% after 7 days of cultivation; of note, the activity decreased afterward. These results suggest that the best buckwheat sprouts with higher biological activities are those cultivated for 7-9 days. For a complete understanding of the potential of buckwheat sprouts as functional foods, we plan to further analyze their antioxidant activity in the future.

• Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.398-413
• /
• 2016

This work describes the design and development of a new drying system for a rollover carwash machine with the support of numerical tools. The drying system is composed of a pair of stationary vertical dryers and a moveable horizontal dryer that can adjust itself to the contour of a vehicle. After the definition of the dryers' concept, their performance was assessed individually to check their internal flow pattern and to improve their airflow distribution. These issues are expected to provide feedback on redesign and geometric optimization of the dryers. After redesign of the dryers separately, the behaviour of the complete drying system was studied on actual vehicle models, representative of the shortest and tallest dimensions that can be washed with the existing carwash machine sector. The drying efficiency of the whole system was studied by calculation of shear stress distribution on various surfaces of a given vehicle. The results allowed concluding that the overall drying performance of the design system is very good and assure adequate drying on most vehicles surfaces. The results obtained from numerical studies were then validated with experimental measurements and a good agreement was found between the two. The procedure employed in this work can be applied to support the design and analysis of other mechanical drying systems.

• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.639-649
• /
• 2020

This study investigates consumer opinions of clothing care and provides fundamental data to decision-making for oncoming development of clothing care system. Textom, a web-matrix program, was used to analyze big data collected from Naver and Daum with a keyword of "clothing care" from March 2019 to February 2020. A total of 22, 187 texts were shown from the big data collection. Collected big data were analyzed using text-mining, network, and CONCOR analysis. The results of this study were as follows. First, many keywords related to clothing care were shown from the result of frequency analysis such as style, Dryer, LG Electronics, Product, Customer, Clothing, and Styler. Consumers were well recognizing and having an interest in recent information related to the clothing care system. Second, various keywords such as product, function, brand, and performance, were linked to each other which were fundamentally related to the clothing care. The interest in products of the clothing care system were linked to product brands that were also naturally linked to consumer interest. Third, the keywords in the network showed similar attributes from the result of CONCOR analysis that were classified into 4 groups such as the characteristics of purchase, product, performance, and interest. Lastly, positive emotions including goodwill, interest, and joy on the clothing care system were strongly expressed from the result of the sentimental analysis.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.4
• /
• pp.262-267
• /
• 2016

This paper describes a design of a hair drier to improve its performance. the performance of the hair drier can be improved by increasing the wind velocity of its discharge port. the design of the hair drier is accomplished by using the CFD. the validity of design results were verified by comparison with the dry change of the hair drier. In this paper, the initial condition of the applied hair drier is as follows, the number of the blade is 9, the diameter of the suction port is 40[mm], the tip clearance is 12.5[mm], the con angle is $28.5^{\circ}$ and the fan angle is 27.5R. From design results, the enhanced condition of the hair drier can be obtained as follows, the number of the blade is 3, the diameter of the suction port is 50[mm], the tip clearance is 10.5[mm], the con angle is $21.5^{\circ}$ and the fan angle is 75R. At the enhanced condition of the hair drier, the wind velocity of the hair drier is 29[%] increase, and the dry time is 40[%] increase compare to the initial condition of the hair drier.

• 한국연소학회:학술대회논문집
• /
• 2001.11a
• /
• pp.83-89
• /
• 2001

Most technologies of reduction process used in the heat treatment of existent metal products are related to metals applied to bolts and parts of automobiles, and nonmetal such as copper. Heating conditions and reduction gases produced in above processes depend on types of products to be treated thermally but heating systems employ electricity commonly and the reduction gases are separated into additional production equipment and a gas dryer and inefficiently provided into the system. Electrical heating system has the advantage of convenient temperature-control but is not economical because of disadvantages of high electricity-running cost and extra installation cost of a transformer. Accordingly, development of the system which has economical heating mode in which provision of reduction gas and heating conditions are unified is necessary for improvement of economy and efficiency in current reduction processes. This study aimed to develop a new advanced heat treatment furnace using catalytic combustion. thereby minimizing the cost during heating, supplying heat and reductive gas at the same time and controlling operating condition freely by changing electrical heating system to heating system by the gas combustion and regeneration of wasted heat.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.1007-1013
• /
• 2003

As environmental restriction kas continuously become more strict, machining technology has emphasized on development of environment-friendly technology. In cutting technology, it has been well recognized that cutting fluids might have undesirable effects on workers health and working environment. In this study, compressed cold air was used as a replacement for conventional cutting fluids. The cooling effect on cutting tool was analyzed using the finite element method and the computational fluid dynamics. This study focused on the temperature simulation of cutting tool by real flow analysis of cold air. The maximum flow rate and the minimum temperature of compressed cold air are 300ι/min and -30$^{\circ}C$ respectively. To compare the simulation and experimental results, inner temperature of the cutting tool was measured with the thermocouple embedded in the insert. The results show that the analysis of cutting temperature using FEM and CFD is resonable, and the replacement of cutting fluid with cold air is available.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.3
• /
• pp.500-507
• /
• 2008

Hot air drying is a method that let moistures evaporate by heat exchange between heating air and dry target. This way is dominating more than about 70% of dryers that the use extent is wide fairly, and is established in domestic than dryer that use conduction or radiation etc. Most of research about drying had been emphasized in size of device through analysis for these dry phenomenon plain, heating topology, and aspect of form and so on by dry target's special quality, and research about device development or waste heat withdrawal technology in energy utilization efficiency side is slight real condition. Therefore, in this study, Investigated numerically about thermal efficiency elevation that is leaned against as that change the temperature of inlet and outlet in heat exchanger of the hot air drying tower.

• Journal of Biosystems Engineering
• /
• v.29 no.4
• /
• pp.307-316
• /
• 2004

This study was conducted to develop a coating system for producing clean enriched rice. The nutritional components of such as brown rice, white rice, clean white rice, enriched rice of US, black rice of China, and rice with perfume of China, were analyzed and compared. Total protein lipid md minerals in brown rice were higher than those in the other rices. A nutrition premix with lysine, thiamine, niacine, calcium lactate, ferrous lactate, and rice starch was made for enriching white rice. A coating device consisted of a tumbler, two spraying nozzles, a rice mixer, etc was developed with the capacity of 1 ton/h. And far-infrared dryers of batch and continuous types were developed to dry hygienically the wet enriched rice. The percentages of lysine, thiamine, amino acid nitride, and Ca and Fe of the enriched rice samples produced in this study were, respectively, 4, 3, 3. 2, and 10 times higher than those of white rice, respectively.

• Journal of Radiation Industry
• /
• v.4 no.4
• /
• pp.347-352
• /
• 2010

In this study, we addressed a novel nanosized curdlan-silica complex, which is curdlan bound to silica, for the development of a sustain-releasing micro element fertilizer formulation. The complex was obtained as follow steps; First, Curdlan polymer, sodium silicate ($Na_2SiO_3$) and isopropyl alcohol were dissolved in DDW. Next the resultant solution was irradiated by $^{60}Co$ gamma-irradiator (150 TBq of capacity; ACEL, Canada). Then $MgSO_4$ was treated with the resultant solution. The obtained colloidal solution was dried by freeze dryer. Finally, we obtained a novel nanosized curdlan-silica formulation containing $MgSO_4$ from the colloidal solution. The morphology of the complex was characterized by using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The nanosized curdlan-silica complex has a particle size ranging from 20 to 80 nm and high stability. Our results suggested that the nano-complex can be applicable to use in various sustain-releasing formulation for pesticide delivery system (PDS).