• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1259-1260
• /
• 2006

Intensive technological research on the Dry-bag CIP equipment was carried out to improve the dimensional accuracy and the productivity. The rubber mold design technology using FEM simulation during pressing was introduced, in order to achieve higher dimensional preciseness, and criteria for the selection of the In-line type or Off-line type, were established based on the powder flowability index proposed by Carr. Based on these research results, high productivity Off-line Dry-bag CIP equipment, which can realize good dimensional accuracy with high productivity, was developed even for non-granulated powders with poor packing density.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.11 no.1
• /
• pp.292-299
• /
• 1998

I examined 54 patients who had been diagnosed as dry eye or had experienced symptoms of dry eye such as foreign body sense, dry sense, sore sense, pain, etc. and had some results. The results were as follows; 1. In sex, there were more females than males. 2. The age was examined from 19 years to 70 years and 51-60 years was the most. 3. In duration of symptoms, 1-5 years was taken most of the patients. 4. In blood type, O type was dominant comparing other blood types. 5. In warm and cold preference cold was more than warm or tepid. 6. In associated ocular & systemic disease chronic gastritis was the most and the next was chronic conjunctivitis. 7. In main symptoms foreign body sense was the most of them 8. In prescription Gamisamultang(加味四物湯) was most frequently administered to the patients.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.6
• /
• pp.15-21
• /
• 2003

Image processing technique was adapted for exploring the more convenient ways to investigate the drying characteristics of wood. The acquisition of information about drying characteristics is indispensable for the development or improvement of dry-kiln schedules. A small internal fan type wood dry kiln was combined with image-processing and data-acquisition systems to monitor continuously the formation of checks and moisture reduction during drying. All the images and data were analyzed to improve or estimate the dry-kiln schedules and predict the drying time which would be required to dry green wood to 10% moisture content in internal fan type kiln. Samples of 20 mm- and 50 mm-thick Metasequoia glyptostrobodies, Paulownia coreana Uyeki, Pinus densiflora Sieb. Et Zucc., Platanus occidentalis L., Quercus acutissima and Robinia pseudo-acacia were used to verify the potentiality of this technique.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2733-2736
• /
• 2003

This paper proposes a dry-type active surface EMG electrode for the myoelectric prosthetic hand. The designed electrode is small size for embedding in the socket of prosthetic hand, and it has three leads including the reference of signal. To acquire EMG signal rejected the power noise, a precision differential amplifier and various filters such as the band pass filter band rejection filter, low pass and high pass filter are embedded on the electrode. The final output of the electrode is integrated absolute EMG (IEMG) obtained by full rectifier and moving average circuits. From experimental results using the implemented dry-type active surface EMG electrode, the proposed electrode is feasible for the myoelectric prosthetic hand.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.1
• /
• pp.1-5
• /
• 1995

Dry-type artificial seeds were produced by dehydrating alginate-encapsulated somatic embryos of lire. When placed on half- strength MS solid medium 20% of the artificial seeds dehydrated to the level of 80% water loss were capable of germination. Addition of 0.1 mg/L ABA to alginate solution before encapsulation enhanced the germination percentage of those dehydrated to the level of nil to 90% water loss by up to 1.7-folds. The results suggest that ABA may enable somatic embryos to overcome physical and/or physiological restraint by encapsulation and dehydration.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.9
• /
• pp.786-791
• /
• 2009

Transformer failures are mostly due to partial discharges (PDs) caused by the deteriorated insulation. It is, therefore, important to monitor PD occurrence in insulation system and prevent their deterioration. The presented paper deals with a PD detection method by a capacitive probe, which easily apply to cast - resin dry - type transformers. The PD detection system consists of a capacitive probe and a low noise amplifier having the frequency bandwidth of 500 $Hz{\sim}30$ MHz. In the experimental set-up, sensitivity of the system is 7.16 mV/pC.

• The Journal of Pediatrics of Korean Medicine
• /
• v.17 no.2
• /
• pp.85-101
• /
• 2003

Objectives : The purpose of this study was the collection of dietary and external treatments of atopic dermatitis and it's classification according to physical type. Methods : The author conducted a literature and Internet search in data. Results : We collected the generally used dietary and external treatments. These collected treatments are classified according to the following oriental medical categories; thermic and wet skin type, thermic and dry skin type, chill and wet skin type and chill and dry skin type. conclusion : Wemust use these treatments pertinently according to physical type.

• Proceedings of the Korean Society of Grassland Science Conference
• /
• 2001.06a
• /
• pp.104-104
• /
• 2001

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.429-429
• /
• 2012

To investigate the gettering effect of B-doped n-type monocrystalline silicon wafer, we made the p-n junction by diffusing boron into n-type monocrystalline Si substrate and then oxidized the boron doped n-type monocrystalline silicon wafer by in-situ wet and dry oxidation. After oxidation, the minority carrier lifetime was measured by using microwave photoconductance and the sheet resistance by 4-point probe, respectively. The junction depth was analyzed by Secondary Ion Mass Spectrometry (SIMS). Boron diffusion reduced the metal impurities in the bulk of silicon wafer and increased the minority carrier lifetime. In the case of wet oxidation, the sheet resistance value of ${\sim}46{\Omega}/{\Box}$ was obtained at $900^{\circ}C$, depostion time 50 min, and drive-in time 10 min. Uniformity was ~7% at $925^{\circ}C$, deposition time 30 min, and drive-in time 10 min. Finally, the minority carrier lifetime was shown to be increased from $3.3{\mu}s$ for bare wafer to $21.6{\mu}s$ for $900^{\circ}C$, deposition 40 min, and drive-in 10 min condition. In the case of dry oxidation, for the condition of 50 min deposition, 10 min drive-in, and O2 flow of 2000 SCCM, the minority carrier lifetime of 16.3us, the sheet resistance of ${\sim}48{\Omega}/{\Box}$, and uniformity of 2% were measured.

• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.412-418
• /
• 1988

Granular shapes and sizes, physicochemical priperties and gelatinization patterns of sweet potato starches from Wonki(the dry type) and Chunmi(the moist type) were investigated. Starch granules of sweet potatoes were round. Granule sizes of Wonki starch were mainly $11{\mu}m$ and those of Chunmi starch were $12{\mu}m\;and\;17{\mu}m$. Wonki starch had lower water binding capacity and swelling power than Chunmi starch. But Wonki starch had higher amylose content, gelatinization temperature, miture content for gelatinization and temperature for gelatinization than Chunmi starch.