• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.665-670
• /
• 2001

The purpose of this study is to develop a new type dryer, which is to proceed mixing and drying of wet-materials at the same time and drying process is carried out in a closed system. In this drying system, thermal contact occurs, when a fluidized zone is created by paddle mechanism. Accordingly, wet-materials is dried in a short time without any damage. Also wet-materials could be dried uniformly to low moisture contents. It is suitable to dry a small quantity of multi-kind materials. And drying process is carried out in a closed system, so as for environmental pollution dust not to be emitted into the atmosphere. Accordingly, it could be used to dry not only food and chemical materials, but also environmental pollution materials.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.908-913
• /
• 2002

An analytical study is presented on the hydroelastic vibration of two rectangular identical plates coupled with a bounded fluid by using the finite Fourier series expansion method. It is observed that the two contrastive modes, the so called the out-of-phase and in-phase modes appear. The proposed analytical method is verified by observing a good agreement to three dimensional finite element analysis results. All natural frequency of the in-phase modes can be predicted well by the combination of the dry beam modes. The theoretical prediction for the out-of-phase mode can be improved by using the polynomial functions satisfying the plate boundary conditions and fluid volume conservation instead of using dry beam modes.

• Tribology and Lubricants
• /
• 제9권1호
• /
• pp.38-44
• /
• 1993

The present study was undertaken to investigate the dry wear characteristics of die steel STD 11 for cold molding. The wear test was experimentally carried out under different conditions using a wear device, which was made in laboratory, and in which annular surfaces of wear testing specimens wear rubbed in dry sliding condition with varying the sliding speed, contact pressure, and sliding distance. The wear loss by variation of sliding speed was much in 0.3 m/sec and less in higher speed range above its sliding speed according to formation of the boundary lubrication film. The critical sliding speed with maximum value of the specific wear rate switched over to lower speed side according. as contact pressure increased. The critical sliding distance was increased with decrease in oxidation reaction velocity. The depth below subsurface showing maximum hardness (Hv) came out at the position, $60 \mu m$, of the maximum shear stress due to strain hardening.

• Tribology and Lubricants
• /
• 제5권1호
• /
• pp.28-35
• /
• 1989

The wear tests of ceramic materials in dry rolling contact were carried out at room temperature to investigate their macroscopic wear characteristics. Both point contact and line cootact were adapted in the wear tests of them. Ceramic materials used in these tests were silicon nitride, silicon carbide, cermet of TiN and TiC, titania, and alumina. The wear test of the bearing steel was carried out to compare to the wear test results of the ceramic materials. The results showed that the wear rate of silicon nitride was smaller than any other ceramic materials and bearing steel. In the steady wear, the wear volume of ceramic materials increases linearly with the rolling distance. It was also found from the experimental results that fracture toughness and surface roughness dominate the wear process of ceramic materials in dry rolling contact.

• Plant Resources
• /
• 제7권3호
• /
• pp.181-186
• /
• 2004

To find out the optimum fertilizer level for high yielding variety, Paldanghomil, experiment was conducted with 15 compositions of fertilizer levels at the experiment field of forage rye in Sunchon National University from Sep. 1998 to Aug. 1999. The effects of nitrogen fertilizer on plant growth were large significant but increasing rate of application in potassium and phosphate fertilizers above 10kg/10a had negligible effects on plant growth. Raising nitrogen application rate of fertilizers turned out to be 18-10-10kg/l0a of N-P$_2$O$_{5}$-K$_2$O. Content of crude protein was the highest and that of crude fiber such as NDF, ADF, cellulose and lignin were lowest at this rate. Furthermore, IVDMD was high and dry matter yield were the highest at the optimum rate.e.

• 환경영향평가
• /
• 제8권2호
• /
• pp.31-44
• /
• 1999

Atmospheric dry deposition flux and ambient particle mass size distribution were measured to evaluate the impact of atmospheric deposition around the Nanjido landfill sites. Wind direction affects greatly on the variation of mass flux and mass size distribution and made two times higher when the wind was blown from the road side. The effect of Nanjido landfill on the mass size distribution was significant comparing to simultaneously measured mass size distribution at the other sampling site. The results showed that the particle diameter bigger than $10{\mu}m$ explained the majority of atmospheric dry deposition flux. A survey was also carried out to investigate the contamination of soils in a completed Nanjido landfill. The chemical properties of the soil analyzed in the present study include pH, oxidation-reduction potential (ORP), anion and cation concentration, total organic carbon(TOC), and some-metal elements concentrations were analyzed. Microbial activity in the soils was also evaluated by measuring dehydrogenase activities. TOC in the soil contaminated with leachate was $467.0{\mu}g/g-dry$ soil, and the TOC in the soil, where Nanjido landfill gases were emitted from, was $675{\mu}g/g-dry$ soil. The highest microbial activity of $968.0{\sim}2147{\mu}g-TPF/g-dry$ soil day was found in the soil spouting Nanjido landfill gases. Compared with those in the uncontaminated soil, the concentrations of Cr, Cu and Ph in the contaminated soil were higher.

• 한국초지조사료학회지
• /
• 제8권2호
• /
• pp.77-84
• /
• 1988

This experiment was conducted to investigate the morphological and structual characters and the dry weight of plant (DW/pl.) concerned vegetational structure of orchardgrass pastures by the times of year, from 1 year to 7 year previous, 1986 through 1980, alternately. this experiment was carried out on the experimental fields of Yonsei University. The results are summarized as follows: 1. Population density (PD) was extremely decreased by the times of year. 2. Pasture productivity was highest at 3 year old pasture, was lowest at 5 year old pasture and was recovered at 7 year old pasture. 3. Recovery of pasture productivity was followed the increase of dry weight of plant (DW/pl.) and number of tillers per plant (NT/pl.) 4. The population density of 7 year old pasture was 14 plants per square meter. 5. The number of tillers per plant (NT/pl.), dry weight of plant (DW/pl.) plant length (PL), and plant size (PS) was frequently showed the highest values by the times of established year. 6. The stubble diameter (DIA), stubble area (SB), plant size (PS), distance between neibour plant (DIS) and leaf area index (LAI) was increased according to the times of year. 7. The dry weight of plant (DW/pl.) was positively significant correlations with the number of tillers per plant (NT/pl.) all of the established pastures, but the dry weight of a tiller (WT) was tended to increase of correlations with the dry weight of plant (DW/pl.) by the times of year. 8. Differences between morphological and structual characters was recognized according to the times of year.

• 산업기술연구
• /
• 제26권B호
• /
• pp.73-81
• /
• 2006

A sensitivity analysis about effects of influencing factors on the stability of Soil cut slope was performed. Slope stability analyses were carried out under dry, rainy and seismic conditions. Dominant factors controlling the slope stability were chosen such as cohesion and internal friction angle, unit weight of soil, water table and seismic horizontal coefficient used for the slope stability during earthquake. Parametric stability analysis with those factors was performed for sensitivity analysis. As results of analyzing the sensitivity of factors under dry and rainy conditions, effects of cohesion, internal friction angle and unit weight of soil on the stability of slope are more critical in the dry condition than in the rainy condition. Cohesion and internal friction angle are more dominant factors influencing the slope stability irrespective of dry or rainy conditions than unit weight of soil and the horizontal seismic coefficient. The unit weight and the horizontal seismic coefficient affects crucially the stability according to conditions of slope formation and dry or rainy seasons. For the effect of horizontal seismic coefficient on stability of slope, safety factor of slope is not affected significantly by dry or rainy conditions. However, increase of the horizontal seismic coefficient under the rainy condition floes reduce the safety factor significantly rather than the dry condition. Therefore, it is needed that the location of the water table is assigned appropriately to satisfy the required safety factor of stability in the case of checking slope stability for the rainy and seismic conditions.

• 한국초지조사료학회지
• /
• 제8권3호
• /
• pp.77-84
• /
• 1988

This experiment was conducted to investigate the morphological and structual characters and the dry weight of plant (DW/pl.) concerned vegetational structure of orchardgrass pastures by the times of year, from 1 year to 7 year previous, 1986 through 1980, alternately. This experiment was carried out on the experimental fields of Yonsei University. The results are summarized as follows: 1. Population density (PD) was extremely decreased by the times of year. 2. Pasture productivity was highest at 3 year old pasture, was lowest at 5 year old pasture and was recovered at 7 year old pasture. 3. Recovery of pasture productivity was followed the increase of dry weight of plant (DW/pl.) and number of tillers per plant (NT/pl.). 4. The population density of 7 year old pasture was 14 plants per square meter. 5. The number of tillers per plant (NT/pl.), dry weight of plant (DW/pl.) piant length (PL), and plant size (PS) was frequently showed the highest values by the times of established year. 6. The stubble diameter (DIA), stubble area (SB), plant size (PS), distance between neibour plant (DIS) and leaf alea index (LAI) was increased according to the times of year. 7. The dry weight of plant (DW/pl.) was positively significant correlations with the number of tillers per plant (NT/pl.) all of the established pastures, but the dry weight of a tiller (WT) was tended to increase of correlations with the dry weight of plant (DW/pl.) by the times of year. 8. Differences between morphological and structual characters was recognized according to the times of year.

• 한국토양비료학회지
• /
• 제23권1호
• /
• pp.60-66
• /
• 1990

영남지역(嶺南地域)의 수종(數種) 토양통(土壤統)에서 경작여부(耕作與否)에 따른 토착(土着) 대두근류균(大豆根瘤菌)의 분포특성(分布特性)을 구명(究明)하였다. 이를 위하여, 토양통(土壤統)이 서로 다른 5개(個) 지점(地點)의 경작지(耕作地)와 미경작지(未耕作地) 토양(土壤)의 대두(大豆) 접종효과(接種效果)(Soil inoculum potential)와 토착근류균(土着根瘤菌)의 취락형태적(聚落形態的) 분포특성(分布特性)을 조사(調査)하였는데 그 결과(結果)는 다음과 같았다. 1. 영남지역(嶺南地域)에 분포(分布)한 토착(土着) 대두근류균(大豆根瘤菌)의 밀도(密度)는 경작지(耕作地)의 경우 $10^4Cells/g$. soil 이상(以上)이었으나 미경작지(未耕作地)에서는 경미(輕微)하였다. 2. 경작지(耕作地) 토양(土壤)의 대두(大豆) 접종효과(接種效果)(Soil inoculum potential)는 NifTAL의 우수근류근(優秀根瘤菌) 접종제(接種劑) TAL 보다 좋았고, 대두근류균(大豆根瘤菌)의 질소고정(窒素固定) 특성면(特性面)에서 근류(根瘤) 무게가 근류수(根瘤數)를 보상(報償)하였다. 3. 토착(土着) 대두근류균(大豆根瘤菌)의 취락형태별(聚落形態別) 분포(分布)는 경작여부(耕作與否)에 따라 상이(相異)하였는데, "Dry"형(形) 기경지(旣耕地)에서, "Wet"형(形)은 미경작지(未耕作地)에서 각각(各各) 우점경향(優占傾向)을 보였다. 4. 토착(土着) 대두근류균(大豆根瘤菌)의 취락형태별(聚落形態別) 공생효과(共生效果)는 "Dry"형(形)이 "Wet"형(形)보다 좋았다. 따라서 숙전(熟田)에서의 대두생육(大豆生育)은 "Dry"형(形) 토착(土着) 대두근류균(大豆根瘤菌)의 밀도(密度)에 크게 영향(影響)을 받을 것으로 판단(判斷)되었다.