• Textile Coloration and Finishing
• /
• v.25 no.3
• /
• pp.181-193
• /
• 2013

The purpose of this study is to investigate dyeing properties and functionality of cotton and silk fabrics dyed with hot-water extract from Juniperus chinensis heartwood. Water-soluble dye of Juniperus chinensis heartwood extracted with distilled water was expressed YR color series. Dye uptake of cotton continued to increase according to the increase of the dye concentration. Its variation trends were shown to be similar to the isothermal absorption curve of the Freundlich. Dye uptake of silk was better than cotton, increased depending on increasing concentration of the dye, dyeing time and temperature. Its variation trends were shown to be similar to the isothermal absorption curve of the Langmuir. As the pH increased, the dye uptake of fabrics reduced and showed increased on red tinge. Colors of the dyed fabrics were various, depending on dye concentration and the mordant type and mordant concentration. Washing fastness, light fastness and perspiration fastness were not good. However, rubbing and dry cleaning fastness showed relatively good grade. Dyed fabrics of ultraviolet-cut ability and deodorant ability were improved. And dyed fabrics showed antimicrobial abilities of 99.9% against Staphylococcus aureus.

• Journal of Surface Science and Engineering
• /
• v.34 no.1
• /
• pp.33-38
• /
• 2001

10cm-diameter Si(100)∥$1.3\mu\textrm{m}$-X$1.3_2$X$1.3\mu\textrm{m}$-$SiO_2$∥Si(100) afers were prepared using a fast linear annealing (FLA) equipment. 1.3$\mu\textrm{m}$-thick $SiO_2$ films were grown by dry oxidation process. After cleaning and premating the wafers in a class 100 clean room, they were heat treated using with the FLA and conventional electric furnace. Bonded area and bond strength of wafer pairs were measured using a infrared (IR) camera and razor blade crack opening method, respectively. It was confinmed that the bonded area by FLA was around 99% and the bond strength value reached 2172mJ/$\m^2$, which is equivalent to theoritical bond strength. Our result implies that thick $SiO_2$ SOI may be prepared more easily by using $SiO_2$$SiO_2$ bonding interfaces then those of Si/$SiO_2$'s.

• Journal of Surface Science and Engineering
• /
• v.32 no.3
• /
• pp.428-432
• /
• 1999

As metallic surface has its unique lustrous appearance and optical reflectance in visible range of light, the metallization of plastic surface has been an essential drive toward weight reduction for fuel economy and decorations in transportation industry and has been put into practiced from wet chemical-electrochemial to dry vacuum process in view of an environmental effect. Electron-beam metallization was used in this work with an aim at improving the scratchproof surface hardness of plastic substrate with metallic finish character. Thin film of Al ($1000\AA$) and $SiO_2$($7000\AA$) were metallized on substrate of PC and PMMA and the films were evaluated by pencil test for surface hardness and by cross-cut tape test for adhesion. The ion beam treatment improved around twice as hard as non-treat surface. The ion beam is effect on its hardness and adhesion to surface hardened PC substrate.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.387-392
• /
• 2018

Various technical approaches and concepts have been proposed to develop conductive super-hydrophobic (SH) surfaces. However, most of these approaches are not usable in practical applications because of insufficient adhesion and cost issues. Additionally, durability and uniformity issues are still in need of improvement. The goal of this research is to produce a large-area conductive SH surface with improved adhesion performance and uniformity. To this end, carbon nanotubes (CNT) with a high aspect ratio and elastomeric polymer were utilized as a conductive filler and matrix, respectively, to form a coating layer. Additionally, nanoscale silica particles were utilized for stable implementation of the conductive SH surface. To improve the adhesion properties between the SH coating layer and substrate, pretreatment of the substrate was conducted by utilizing both wet and dry etching processes to create specific organic functional groups on the substrate. Following pretreatment of the surface, a zirco-aluminate coupling agent was utilized to enhance adhesion properties between the substrate and the SH coating layer. Raman spectroscopy revealed that adhesion was greatly improved by the formation of a chemical bond between the substrate and the SH coating layer at an optimal coupling agent concentration. The developed conductive SH coating attained a high electromagnetic interference (EMI) shielding effectiveness, which is advantageous in self-cleaning EMI shielding applications.

• Journal of Fashion Business
• /
• v.23 no.3
• /
• pp.23-34
• /
• 2019

The aim of this study is to explore the possibility utilizing Rhododedron brachycarpum as a new natural dye resource. It was dyed in silk fabric according to different dyeing conditions such as dye concentration, dye bath temperature, dyeing time and dye bath pH. The effect of the mordanting conditions were estimated as dyeability and color changes. Additionally, the colorfastness, antibacterial property, ultraviolet protection properties of the dyed and mordanted silk fabrics were examined. The water-soluble dye of Rhododedron brachycarpum extracted with distilled water was expressed as Yellow Red color. The dye-abilities of silk generally increased depending on the increasing values of dye concentration, dye bath temperature and dyeing duration. The highest K/S values were obtained at a dye concentration of 100% (v/v), a dye bath temperature of $90^{\circ}C$, a dyeing duration 120 minutes and a dyeing of pH 2. The light fastness of dyed and Cu mordanted silk fabrics were found to be 4 grade while Al, Fe mordanted silk fabrics were found to be 2~3 grade. The dry cleaning and rubbing fastness were excellent or good. The fade of washing fastness was not good, however, the stain of washing fastness was excellent. The dyed and Al, Cu mordanted silk fabrics indicated 99.9% reduction rate. The dyed and the mordanted fabrics showed very good ultraviolet protection factors.

• Journal of Urban Science
• /
• v.11 no.1
• /
• pp.29-35
• /
• 2022

Waste to Energy Plant were recognized as hateful facilities, and there were many conflicts in the location due to social problems such as the NIMBY phenomenon due to problems such as damage to property in the surrounding area, odor, and image loss. Problems such as air pollution and odor are solved by the development of advanced prevention facilities such as electric dust collectors, wet cleaning systems, semi-dry reaction towers, bag filters, and catalyst towers (SCR: Selective Catalytic Reduction), and air recycling facilities in waste storage tanks. However, it is being avoided because of the perception that it is an incinerator. To resolve these conflicts, the government installs and operates resident convenience facilities to compensate residents near resource recovery facilities, provides green space and improves the environment, and supports heating expenses in accordance with the 「Waste Treatment Facility Support Act」. The purpose of this study is to derive implications through the analysis of domestic and overseas case studies for resident convenience facilities and environment improvement for the promotion of local communities in resource recovery facilities and use them as basic data for community promotion and environmental improvement when installing resource recovery facilities in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1393-1398
• /
• 2009

Conventionally, etching is first considered for microelectronics fabrication process and is specially important in process of a-Si:H thin film transistor for LCD. In this paper, we stabilize properties of device by development of wet and dry etching process. The a-Si:H TFTs of this paper is inverted staggered type. The gate electrode is lower part. The gate electrode is formed by patterning with length of 8 ${\mu}$m${\sim}$16 ${\mu}$m and width of 80${\sim}$200 ${\mu}$m after depositing with gate electrode (Cr) 1500 ${\AA}$under coming 7059 glass substrate. We have fabricated a-SiN:H, conductor, etch-stopper and photo resistor on gate electrode in sequence, respectively. The thickness of these thin films is formed with a-SiN:H (2000 ${\mu}$m), a-Si:H(2000 ${\mu}$m) and n+a-Si:H (500 ${\mu}$m), We have deposited n-a-Si:H, NPR(Negative Photo Resister) layer after forming pattern of Cr gate electrode by etch-stopper pattern. The NPR layer by inverting pattern of upper gate electrode is patterned and the n+a-Si:H layer is etched by the NPR pattern. The NPR layer is removed. After Cr layer is deposited and patterned, the source-drain electrode is formed. In the fabricated TFT, the most frequent problems are over and under etching in etching process. We were able to improve properties of device by strict criterion on wet, dry etching and cleaning process.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.2
• /
• pp.89-94
• /
• 2017

Background: The purpose of improving the quality of oriental medicinal herbs is to contribute to the improvement of the income of farm. The present study investigated the effect of reasonable drying methods, different storage conditions and packageing materials on quality and stability of Scutellaria baicalensis Georgi and for developing GAP (good agricultural practice) guide book. Methods and Results: Three methods of drying Scutellaria baicalensis roots produced over two years were used to estimate loss rate owing to drying, storage, and packaging. The methods of drying were categorized into natural drying (36 - 60 h by sunshine), drying with heat dryer (2 - 10 h), or drying with gas bulk dryer (2 - 10 h). After cleaning, and initial drying for a few days under controlled temperature conditions, the second phase of drying was carried out at 35, 45 and $55^{\circ}C$. Changes in hunter color values and quality under the two studied storage treatments (at $20^{\circ}C$ indoors and at $4^{\circ}C$ in a refigerator) were evaluated. Storage period for 60, 120, and 180 days in three packaging materials, PE (polyethylene package), PP (polypropylene gunnysack), and WP (watertight packing paper) were studied. Conclusions: Initial cleaning, reasonable gas drying and hot air drying, and drying in an oven at 35 and $45^{\circ}C$ after cutting the roots resulted in the lowest loss rates in S. Baicalensis root. Hunter color valuse indicated that stroage of dry roots at room temperature was better than PP packaging, and that cold stroage was better than PE packaging for long-term stability.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.203-213
• /
• 2016

Conservation treatment of modern cultural heritage rickshaw from National Museum of Korean Contemporary History were carried out. The Rickshaw is divided into three parts which are chair part, sun-block cover part, wheels part. Treatment was referred to analysis results of P-XRF, species identification, FT-IR and microscope observation on Rickshaw. Outer films of rickshaw were chipped off. Therefore, conservation and restoration treatment were carried out in the damaged area. Degradation in armrest, saddle and backside of chair may cause serious problem. Therefore, the reinforcement were carried out with similar materials. Dry and wet cleaning were performed in sun-block cover to remove white stain and corrosion contaminant. Furthermore, reinforcement and restoration were performed in damaged area. Rickshaw from National Museum of Korean Contemporary History was made with various materials. This research result expects to be a great example of conservation treatment for modern cultural heritage which is made of various materials and to be used as useful data for conservation and restoration in modern cultural heritage.

• Journal of Conservation Science
• /
• v.18 s.18
• /
• pp.63-74
• /
• 2006

All rock materials of the three storied stone pagoda in Seoakri were composed of light gray alkali granite with medium grained and developed with small mialolitic cavities. This stone pagoda is preserving almost archetype except the head part because there was repair work already. But, foundation, basement and roof rocks are serious state by microbial invasion such as lichens. Because there are tree and grass that cause direct effect to stone pagoda surrounding. Therefore, conservation treatment executed the primary dry cleaning and secondary wet cleaning treatment. Stone surface is partly not removed well such as lichens which part removed using cleansing device that use high temperature steam. Some treated part concrete and epoxy resin remove and retreatment with mixing talc and alkali granite powder to epoxy resin. Did color matching at mixing process of epoxy resin and fillers to properties with set the feel of a material. Also, drainage ditched to minimize inflow of rainwater fall from slope that is on the east of stone pagoda, tree and grass in stone pagoda surrounding wished to do remove and control occurrence of lichens hereafter minimizing moisture conteats.