• 식품보건융합연구
• /
• 제4권3호
• /
• pp.22-31
• /
• 2018

In this present work, the amounts of toxic elements were determined in the soft tissues of mollusks (Mytilus galloprovincialis and Rapana venosa) collected from Igneada shores of the Black Sea where suggested as Marine Protection Area (MPA). M. galloprovincialis accumulated the highest amounts of Cd in winter, while the highest amounts of Cd and Hg were detected in R. venosa in winter and autumn. The concentrations of toxic elements found in the soft tissues of mollusks varied for Cd: 0.07-0.14, Hg: 0.03-0.44 and Pb: 0.09-0.21 mg/g dry wt. The estimated levels of all non-essential metals in the present work were lower than the limits permitted by European Community Regulation (EU) and the Turkish Food Codex (TFC). The estimated weekly intakes (EWI) and daily intakes (EDI) of all the through consumption of these seafood by Turkish people in the Igneada coasts of the Black Sea were quite below the permissible tolerable weekly/daily intakes for 70 kg person (PTWI / PTDI) set by FAO/WHO. As results, it can be concluded that no hazard effects on people health would be raised at present from the consumption of these mollusks' species.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.58-58
• /
• 2022

With the development of advanced technology, automation of agricultural work is spreading. In association with the 4th industrial revolution-based technology, research on field smart farm technology is being actively conducted. A state-of-the-art unmanned automated agricultural production demonstration complex was established in Naju-si, Jeollanam-do. For the operation of the demonstration area platform, it is necessary to build a sophisticated, advanced, and intelligent field smart farming model. For the operation of the unmanned automated agricultural production demonstration area platform, we are building data on the growth of soybean for smart cultivated crops and conducting research to determine the optimal time for agricultural work. In order to operate an unmanned automation platform, data is collected to discover digital factors for water management immediately after planting, water management during the growing season, and determination of harvest time. A subsurface drip irrigation system was established for smart water management. Irrigation was carried out when the soil moisture was less than 20%. For effective water management, soil moisture was measured at the surface, 15cm, and 30cm depth. Vegetation indices were collected using drones to find key factors in soybean production prediction. In addition, major growth characteristics such as stem length, number of branches, number of nodes on the main stem, leaf area index, and dry weight were investigated. By discovering digital factors for effective decision-making through data construction, it is expected to greatly enhance the efficiency of the operation of the unmanned automated agricultural production demonstration area.

• 전기화학회지
• /
• 제3권1호
• /
• pp.5-10
• /
• 2000

가속화 대기부식방법인 전기화학적 wet/dry측정법을 이용하여, 상대습도에 대한 탄소강의 부식율과 부식포텐셜을 동시에 측정하였다. 측정된 부식율 대 상대습도 곡선은 세 영역 즉,상대습도가 증가함에 따라 일정한 부식율을 보이는 첫 번째 영역, 부식율의 대수값(logarithmic value) 이 상대습도와 비례관계를 보이는 두 번째 영역, 부식율이 오히려 급격히 감소하는 세 번째 영역으로 구분되었다. 일반적인 탄소강의 대기부식기구로부터, 다른 표시방법인 부식포텐셜 대 상대습도 곡선을 도입하였다 여기서의 각 영역은, 부식생성물의 존재양상에 따라 lepidocrocite$(\gamma-FeOOH)$단상영역, lepidocrocite와 magnetite$(Fe_3O_4)$ 상이 공존하는 혼합상영역, 그리고 magnetite 단상영역으로 구분되었다. 두 종류의 표시방법에서의 각 영역이 서로 잘 일치하였으며 이는 실제 FT-IR분석과 표면관찰을 통해서 명확히 확인되었다. 본 연구에서 도입한 상호보완적인 두 종류의 영역표시법은 탄소강의 대기부식을 총체적으로 평가하는데 유용하였다.

• Earthquakes and Structures
• /
• 제14권4호
• /
• pp.323-336
• /
• 2018

Machine foundations with impact loads are common powerful sources of industrial vibrations. These foundations are generally transferring vertical dynamic loads to the soil and generate ground vibrations which may harmfully affect the surrounding structures or buildings. Dynamic effects range from severe trouble of working conditions for some sensitive instruments or devices to visible structural damage. This work includes an experimental study on the behavior of dry dense sand under the action of a single impulsive load. The objective of this research is to predict the dry sand response under impact loads. Emphasis will be made on attenuation of waves induced by impact loads through the soil. The research also includes studying the effect of footing embedment, and footing area on the soil behavior and its dynamic response. Different falling masses from different heights were conducted using the falling weight deflectometer (FWD) to provide the single pulse energy. The responses of different soils were evaluated at different locations (vertically below the impact plate and horizontally away from it). These responses include; displacements, velocities, and accelerations that are developed due to the impact acting at top and different depths within the soil using the falling weight deflectometer (FWD) and accelerometers (ARH-500A Waterproof, and Low capacity Acceleration Transducer) that are embedded in the soil in addition to soil pressure gauges. It was concluded that increasing the footing embedment depth results in increase in the amplitude of the force-time history by about 10-30% due to increase in the degree of confinement. This is accompanied by a decrease in the displacement response of the soil by about 40-50% due to increase in the overburden pressure when the embedment depth increased which leads to increasing the stiffness of sandy soil. There is also increase in the natural frequency of the soil-foundation system by about 20-45%. For surface foundation, the foundation is free to oscillate in vertical, horizontal and rocking modes. But, when embedding a footing, the surrounding soil restricts oscillation due to confinement which leads to increasing the natural frequency. Moreover, the soil density increases with depth because of compaction, which makes the soil behave as a solid medium. Increasing the footing embedment depth results in an increase in the damping ratio by about 50-150% due to the increase of soil density as D/B increases, hence the soil tends to behave as a solid medium which activates both viscous and strain damping.

• 한국작물학회지
• /
• 제47권3호
• /
• pp.250-253
• /
• 2002

미곡종합처리장을 이용한 보리 산물수매 체계를 조사 분석하여 보리의 산물수매를 확대를 위한 기초자료를 제공하고자 실시하였다. 1.보리의 입고는 오전 10시부터 시작되었고, 오후 3시 이후에는 전체 산물 수매량의 61.1%가 입고되었다. 입고된 보리의 일별 평균 수분함량은 15.8-29.6%범위이었고, 건조기에 투입된 보리의 날짜별, 농가별, 필지별 수분함량의 변이가 켰다. 2. 건조 시간은 투입되는 보리의 수분함량에 따라 차이가 많았으며, 평균 건조시간은 9.5시간, 평균 건감율은 0.89% 이었다. 수분함량이 너무 높으면 건조시간이 많이 소요되고 투입구나 저류부의 탱크를 막는 고장의 원인이 되고, 품질이 떨어지므로, 후작물 재배에 지장이 없는 한 늦게 수확하는 것이 좋을 것으로 생각되었다. 3. 입고 보리에 함유된 이물질량은 보리의 수분함량 19.7-30%범위에서는 0.3-l.2%로 별 차이가 없었으나, 수분함량이 30%이상이 되면 급격히 증가하여 수분함량 38.9%에서는 이물질의 양이 5.9%로 많아졌다. 이물질 함량을 낮추기 위하여 분리능력이 좋은 조선기로 교체가 필요하였다. 4. 건조비용은 14% 종자수분 함량 환산 중량 기준으로 24% 이상은 50원, 17%이하는 30원이었다. 저장은 실내 사각빔과 폴리 콘 백에 담아 평상창고에 보관하였다. 저장 중 품질 저하를 막기 위하여 실내 또는 실외 저장사일로의 증설이 필요하였다.

• 한국수산과학회지
• /
• 제18권5호
• /
• pp.409-416
• /
• 1985

In previous paper (Lee et al., 1983) processing method of sardine meat "surimi" was described as a part of the wort to develop new types of ready-to-cook food materials with dark fleshed fishes. As the other part of the work, processing of low salt mackerel fillet was investigated, in this paper, in which fresh mackerel was filleted, salted in brine or with dry salt for an adequate time until the expected salt concentration reached, washed, air dried (3 m/sec, 15 to $20^{\circ}C$), and finally packed individually in K-flex film bag by vacuum or $N_2$ gas substitution. Salting time and salt concentration of brine was decided by the salt level penetrated into the fillet. As the final salt level was fixed to 4 to $5\%$, salting for 20 hours with $10\%$ dry salt or in $15\%$ brine at $5^{\circ}C$ was enough to get that level of salt. If the final salt level was set 5 to $6\%$, salting for 20-24 hours with $15\%$ dry salt or in $20\%$ brine was adequate. Salt penetration, however, was not much influenced by salting method and temperature. Changes in VBN and salt soluble protein occurred more rapidly in cases of salting with dry salt at $20^{\circ}C$ than salted in brine at $5^{\circ}C$, although it was not significant in the period of 20 to 24 hours. Oxidation of lipid and histamine formation during salting at $20^{\circ}C$ could not be neglected if it was delayed loger than 25 hours. Insolubilizing the salt soluble proteins during the storage of salted fillet occurred rapidly regardless of storage temperature. Browning and histamine formation, however, was depended on temperature and packing condition. In case of air pack, deterioration by browning and rancid was deeply developed but not the case for the packs by vacuum or $N_2$ gas substitution. The shelf-life of the salted mackerel fillet based on panel scores of brown color and rancidity, appeared 21 days for the air packed, and more than 30 days for vacunm or $N_2$ gas packed fillet at $20^{\circ}C$.

• 한국진공학회지
• /
• 제6권1호
• /
• pp.9-19
• /
• 1997

본 연구에서는 실리콘 웨이퍼 표면에 존재하는 미량의 Zn, Fe, Ti 금속 오염물들이 UV-excited chlorine radical을 이용한 건식세정 방법으로 제거되는 반응과정을 찾아내고자 하였다. 실리콘 웨이퍼 상에 진공증착법으로 원형패턴이 있는 Zn, Fe, Ti 박막을 증착시켜 상온 및 $200^{\circ}C$에서 UV/$Cl_2$세정하였을 때, 염소 래디컬($Cl^*$)이 Fe, Zn, Ti와 반응하여 제거되 는 것을 반응 전후 광학현미경과 SEM을 통해 표면 형상 변화를 관찰하였고, in-line으로 연결된 XPS를 통해서 반응 후 웨이퍼 표면에 남아있는 화합물의 화학적 결합상태를 관찰 하였으며, UV/$Cl_2$ 세정 후 실리콘 기판이 손상받는 정도를 알기 위해 AFM으로 표면 거칠 기를 측정하였다. 광학현미경과 SEM의 분석 결과에 의하면 Zn와 Fe는 쉽게 제거되는 반면 염화물을 형성하기 보다는 휘발성이 적은 산화물을 형성하는 경향이 강한 Ti은 약간만 제 거되는 것을 확인하였다. XPS분석을을 통해서 이들 금속 오염물들이 chlorine radical과 반 응하여 웨이퍼 표면에 금속 염화물을 형성하고 있는 것을 확인하였고, UV/$Cl_2$세정처리를 하였을 때 실리콘 웨이퍼의 표면 거칠기가 약간 증가하는 것을 알 수 있었다. 지금까지의 결 과를 볼 때, 습식세정과 UV/$Cl_2$건식세정을 병행하면 플라즈마 및 레이저를 사용하는 다른 건식세정 방법에 비하여 보다 저온에서 실리콘 기판의 큰 손상 없이 비교적 용이하게 금속 오염물을 제거할 수 있음을 제안 하였다.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.21-30
• /
• 2015

Ceramic foams are prepared as positive images corresponding to a plastic foam structure which exhibits high porosities (85-90%). This structure makes the ceramic foams attractive as a catalyst in a dry reforming process, because it could reduce a high pressure drop problem. This problem causes low mass and heat transfers in the process. Furthermore, the reactants would shortly contact to catalyst surface, thus low conversion could occur. Therefore, this research addressed the preparation of dry reforming catalysts using a sol-gel catalyst preparation via a polymeric sponge method. The specific objectives of this work are to investigate the effects of polymer foam structure (such as porosity, pore sizes, and cell characteristics) on a catalyst performance and to observe the influences of catalyst preparation parameters to yield a replica of the original structure of polymeric foam. To accomplish these objectives industrial waste foams, polyurethane (PU) and polyvinyl alcohol (PVA) foams, were used as a polymeric template. Results indicated that the porosity of the polyurethane and polyvinyl alcohol foams were about 99% and 97%. Their average cell sizes were approximate 200 and 50 micrometres, respectively. The cell characteristics of polymer foams exhibited the character of a high permeability material that can be able to dip with ceramic slurry, which was synthesized with various viscosities, during a catalyst preparation step. Next, morphology of ceramic foams was explored using scanning electron microscopy (SEM), and catalyst properties, such as; temperature profile of catalyst reduction, metal dispersion, and surface area, were also characterized by $H_2-TPR$ and $H_2-TPD$ techniques, and BET, respectively. From the results, it was found that metal-particle dispersion was relatively high about 5.89%, whereas the surface area of ceramic foam catalysts was $64.52m^2/g$. Finally, the catalytic behaviour toward hydrogen production through the dry reforming of methane using a fixed-bed reactor was evaluated under certain operating conditions. The approaches from this research provide a direction for further improvement of marketable environmental friendly catalyst production.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1610-1610
• /
• 2001

Microbiological examination of silage is of little value in gauging the outcome of silage, and so chemical analysis is more reliable and meaningful indicator of quality. On the other hand chemical assessments of the principal fermentation products provide an unequivocal basis on which to judge quality. Livestock require energy, protein, minerals and vitamins from their food. While fresh forages provide these essential items, conserved forages on the other hand may be deficient in one or more of them. The aim of the conservation process is to preserve as many of the original nutrients as possible, particularly energy and protein components (Woolford, 1984). Silage fermentation is important to preservation of forage with respect of feeding value and animal performance. Chemical and bacteriological changes in the silo during the fermentation process can affect adversely nutrient yield and quality (Moe and Carr, 1984). Many of the important chemical components of silage must be assayed in fresh or by extraction of the fresh material, since drying either by heat or lyophilisation, volatilises components such as acids or nitrogenous components, or effects conversion to other compounds (Abrams et al., 1987). Maize silage dorms the basis of winter rations for the vast majority of dairy and beef cattle production in Uruguay. Since nutrient intake, particularly energy, from forages is influenced by both voluntary dry matter intake and digestibility; there is a need for a rapid technique for predicting these parameters in farm advisory systems. Near Infrared Reflectance Spectroscopy (NIRS) is increasingly used as a rapid, accurate method of evaluating chemical constituents in cereals and dried forages. For many years NIRS was applied to assess chemical composition in dry materials (Norris et al., 1976, Flinn et al., 1992; Murray, 1993, De Boever et al., 1996, De la Roza et al., 1998). The objectives of this study were (1) to determine the potential of NIRS to assess the chemical composition of dried maize samples and (2) to attempt calibrations on undried samples either for farm advisory systems or for animal nutrition research purposes in Uruguay. NIRS were used to assess the chemical composition of whole - plant maize silage samples (Zea mays, L). A representative population of samples (n = 350) covering a wide distribution in chemical characteristics were used. Samples were scanned at 2 nm intervals over the wavelength range 400-2500 nm in a NIRS 6500 (NIRSystems, Silver Spring, MD, USA) in reflectance mode. Cross validation was used to avoid overfitting of the equations. The optimum calibrations were selected on the basis of minimizing the standard error of cross validation (SECV). The calibration statistics were R$^2$ 0. 86 (SECV: 11.4), 0.90 (SECV: 5.7), 0.90 (SECV: 16.9) for dry matter (DM), crude protein (CP), acid detergent fiber (ADF) in g kg$\^$-1/ on dry matter, respectively for maize silage samples. This work demonstrates the potential of NIRS to analyse whole - maize silage in a wide range of chemical characteristics for both advisory farm and nutritive evaluation.

• Tribology and Lubricants
• /
• 제38권4호
• /
• pp.162-169
• /
• 2022

Cobalt-chromium (CoCr)-based alloys have been used for wear applications because of their excellent mechanical properties and wear resistance. With growing concern over environmental problems, CoCr alloys are expected to be used for various tribological applications in degraded lubrication states. To expand the applicability of the materials, data should be accumulated across a broad spectrum of experimental parameters. In this work, the friction and wear characteristics of cobalt-chromium-tungsten (CoCrW) and cobalt-chromium-molybdenum (CoCrMo) alloys are investigated experimentally. The tests are conducted using a pin-on-reciprocating-plate tribotester in dry lubrication. CoCrW and CoCrMo are used as pin and plate materials to investigate the effect of the counter material. The results show that the friction coefficients between CoCrW and CoCrMo generally range from 0.4 to 0.5. The friction coefficient between the CoCrW pin and plate is found to be slightly small. However, the total wear between the CoCrW pin and plate is found to be the largest. In contrast, the total wear between the CoCrW pin and plate is relatively small. Furthermore, CoCrW may cause a faster wear progression of CoCrMo, especially for the case in which CoCrMo is used as the pin material. The results of this work provide a better understanding of the tribological properties of CoCrW and CoCrMo alloys. In addition, this work provides a practical guideline for the use of CoCrW and CoCrMo from the tribological design viewpoint.