• 치위생과학회지
• /
• 제10권4호
• /
• pp.233-239
• /
• 2010

The study of the elderly and poor oral status interpersonal relationships and smooth social life limited to give is the social alienation and isolation, promoting to having problems with a sense of the elderly subjective oral health status and social efficacy affects whether analyzed. 1. Subjective oral health status authoring feel healthy food disorders, toothache, periodontal problems, tmj pain, dry mouth, bad breath symptoms such as 'sometimes' 'often' than a 'no' if you appear to be a highly subjective and social efficacy Efficacy of oral health status and social influence were more (p<0.01). 2. Subjective oral health status of the seven kinds of sub-variable that oral health status, food authoring disorders, toothache, gum disease, jaw joint or more, dry mouth, bad breath instantly and look at the relationship between social efficacy oral health status, ability of mastication, pain in oral, gum disease, tmj pain, dry mouth, presence of halitosis than positive (+) was correlated.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2009년도 추계학술대회 논문집
• /
• pp.501-504
• /
• 2009

• 대한한방내과학회지
• /
• 제40권5호
• /
• pp.1007-1013
• /
• 2019

Objectives: The purpose of this study was to report the treatment of a patient suffering from $Sj{\ddot{o}}gren^{\prime}s$ Syndrome with influenza A virus infection with Korean medicine. Methods: We used herbal medicine, acupuncture, and moxibustion to treat a patient during hospitalization. We observed the changes in symptoms using the European League against Rheumatism $Sj{\ddot{o}}gren^{\prime}s$ Syndrome Patient Reports Index (ESSPRI) and a visual analogue scale (VAS). Results: After treatment for 17 days, the patient's symptoms showed improvement in joint pain, dry eye, and dry mouth. The ESSPRI score was decreased from 10 to 5.3. The VAS for dry mouth and dry eye were decreased from 10 to 6 and from 10 to 5, respectively. Conclusion: This clinical case study suggests that Korean medicine treatment that includes Insamyangyoung-tang-gami could be effective in the treatment of $Sj{\ddot{o}}gren^{\prime}s$ Syndrome.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.370-373
• /
• 2006

Lastly, the problem of filling occurs in the process of concealed joint of adjacent components and was seen in joints between the structure and an electrical or mechanical device. Therefore, the dry processing which replaces wet joint was seen in joints between the structure and a door, ones between the structure and a finishing materials, ones between a gypsum board and electrical device, and ones between a water pipe and a tile finishing. And a process of separating the area of jointed parts in order to eliminate the problem of overlap was seen in joints between a door and a finishing material and ones between a gypsum board on the ceiling and a light. Lastly, an analysis of a process of exposing concealed parts indicated that the problem of filling could be applied to joints between the structure and an electrical or mechanical device and ones between a finishing material and a mechanical device. This study sought out methods to apply Environment Friendly Multi Housing Remodeling that allow easy remodeling as part of environment- preserving policies. It also contains basic data useful to implement long-life houses in the future by presenting a comprehensive design standard for them

• 치과방사선
• /
• 제21권1호
• /
• pp.65-72
• /
• 1991

For the enhancement of a comprehension in temporomandibular joint radiographs, the author has compared and analysed the roentgenographic images of the temporomandibular joint of human dry skull which was taken by submentovertex projection, panoramic radiography, oblique lateral transcranial projection, corrected anterio-posterior tomogram and corrected lateral tomogram. The obtained results were as follows. 1. The submentovertex projection represented in detail the both poles and the posterior surface of the condylar head of the mandible. 2. The oblique lateral transcranial projection represented the articular space, the outer contour of the condylar head and the position of the condylar head within the mandibular fossa, but the relationship of the temporomandibular joint was not revealed accurate, because of the oblique direction of a central ray in taking radiographs. 3. The corrected antero-posterior tomogram was superior method in representation of roent- genographic images of the superior surface and the both poles of the condylar head and the corrected lateral tomogram was considered as the most accurate method among some radiographic techniques for the interpretation of articular space and condyle-fossa relationship. 4. It was possible to observe three-dimensionally the head of condyle with the combinated use of submentovertex projection, corrected antero-posterior tomogram and corrected lateral tomogram.

• 콘크리트학회논문집
• /
• 제26권2호
• /
• pp.125-133
• /
• 2014

이 연구에서는 볼트접합 및 프리스트레스를 적용한 프리캐스트 콘크리트 보-기둥 외부접합부의 내진 및 구조적 성능을 평가하였다. 총 5개의 보-기둥 외부접합부 실험체를 제작하고 보 단부에 변위제어 방식으로 반복하중을 가하며 실험을 수행하였다. 이 연구의 결과를 근거로 다음과 같은 결론을 얻을 수 있었다. 완전 건식공법이 적용된 PC 접합부는 완전 습식공법이 적용된 RC 접합부보다 에너지소산이나 핀칭현상에 있어서 불리한 거동을 보였지만 이는 설계과정에서 의도된 현상이며, 횡변형 능력에 있어서는 우수한 결과를 보였다. 또한 층간변위비 4%까지 횡하중 저항성능의 손실이 발생하지 않았고 매설용너트에 항복이 집중되는 메커니즘을 보이는 점으로 미루어 볼 때 개발된 접합부는 외부접합부 횡저항시스템으로서 적합한 것으로 사료된다. 추가적인 프리스트레스는 PC 접합부의 과도한 핀칭현상 방지 및 접합부 균열제어에 효과적이었으며 PC 접합부의 전체적인 내진성능을 향상시켰다.

• 한국지진공학회논문집
• /
• 제28권3호
• /
• pp.129-139
• /
• 2024

In this study, the SBC system, a new mechanical joint method, was developed to improve the constructability of precast concrete (PC) beam-column connections. The reliability of the finite element analysis model was verified through the comparison of experimental results and FEM analysis results. Recently, the intermediate moment frame, a seismic force resistance system, has served as a ramen structure that resists seismic force through beams and columns and has few load-bearing walls, so it is increasingly being applied to PC warehouses and PC factories with high loads and long spans. However, looking at the existing PC beam-column anchorage details, the wire, strand, and lower main bar are overlapped with the anchorage rebar at the end, so they do not satisfy the joint and anchorage requirements for reinforcing bars (KDS 41 17 00 9.3). Therefore, a mechanical joint method (SBC) was developed to meet the relevant standards and improve constructability. Tensile and bending experiments were conducted to examine structural performance, and a finite element analysis model was created. The load-displacement curve and failure pattern confirmed that both the experimental and analysis results were similar, and it was verified that a reliable finite element analysis model was built. In addition, bending tests showed that the larger the thickness of the bolt joint surface of the SBC, the better its structural performance. It was also determined that the system could improve energy dissipation ability and ductility through buckling and yielding occurring in the SBC.

• 치과방사선
• /
• 제3권1호
• /
• pp.19-28
• /
• 1973

The author has studied maxillo-facial anatomical landmarks using Status X with two methods. The one has performed by application of contrast media on the human dry skull, the other has performed on living human skull as control group. Comparing the panagraphs taken by two methods, the author has drawn following results: 1. The panagraphs revealed the undistorted, highly sharp panoramic shadows of each jaw on a film. 2. Diminishing the inserted anode tube overlapping-free representation of the anterior teeth was taken. 3. Alternating the head position of the objects, direction of anode tube and film placing, the shadows of temporo-mandibular joint and zygomatic arch were taken without overlapping the other bone tissues. 4. In the panagraphs applied various shaped contrast media to each anatomical landmark, a radio-anatomical atlas which is necessary to interpret various bone tissues was taken. 5. In order to interpret panagraphic shadows easily, the author has tried this study by comparing the films of the living human skull with the films of the human dry skull applied contrast media.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 봄 학술발표회 논문집
• /
• pp.86-89
• /
• 1992

In the precast segmental method of construction, segments of a structure are precast, assembled, and tied together by post-tensioning to form the structure. Shear strength and behavior of points in precast concrete structures are important problems in the design of these structures. An experimental program was set up study the shear behavior of precast concrete shear keys. experimental models of keyed joints include a single key, representing one of a series include the shear key shape, d/h ratio(1/4, 1/5, 1/7), and inclined angle (45。 60。 75。). Two different types of joints, i.e., epoxied joint and dry joints were studied. From the present tests, it is found that epoxied joints have higher shear strength than those of dry joints, and that high d/h ratio keys have higher shear strength than those of low d/h ratio keys. The keys with 60。-inclined angle shows the highest shear strength among various angles.

• Journal of Welding and Joining
• /
• 제19권3호
• /
• pp.317-324
• /
• 2001

This study deals with high power Nd:YAG laser welding of thin steels for small pressure vessels. Full penetration welding at the overlap joint was performed so as to assure sufficient weld strength. Results showed that mid-depth weld size reduced drastically with increasing the travel speed. Position of focus had little effect on the bead formation even though short focal system was used. However, the shape factor and the bead width had closely related with the position of focus. Based on the microstructural inspection, acceptable weld was obtained when the overlap clearance was controlled up to 20% of the base metal thickness. In the case that the joint contained more clearance than the critical value, both the tensile shear strength and the tear strength were reduced. Results also demonstrated that shielding gases were proved to play a key role as far as the bead formation characteristics was taken into consideration. Blowing dry air through 5mm in diameter nozzle produced narrower bead cross-section than that of argon or nitrogen shielding.