• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2005년도 추계학술대회 학술발표 논문집 제15권 제2호
• /
• pp.471-474
• /
• 2005

객관적이고, 과학적인 수사를 위해, 교통사고는 공정한 기록에 의해서, 컴퓨터 모의실험, 및 학문, 그리고 충돌 사고 역동성, 도로 및 교통 공학으로 검증되어야 한다. 본 논문에서는, 교통사고, 과학, 객관적인 방법을 이용하여 진짜 교통사고 및 결과를 재현한다. 본 논문에서는 모의실험 결과 다음 같은 사항이 입증되었다. 습한 도로 조건에서 브레이크 작동시간이 건조한 도로 상태보다 더 긴 것이 입증되었다. 뿐만 아니라, 포장도로와 비포장 돌에서는 비포장도로의 제동시간이 포장도로의 제동시간 보다 짧다는 것이 입증되었다.

• 한국잡초학회지
• /
• 제14권1호
• /
• pp.62-70
• /
• 1994

각(各) 재배양식별(栽培樣式別)로 벼와 피의 생육특성(生育特性) 및 각부형태적(各部形態的) 진전(進展)의 변화(變化)를 알아보기 위하여 파종(播種) 및 이앙후(移秧後)(DAS/T) 1, 2, 3, 5, 7, 10, 15, 20일째에 식물체(植物體)를 굴취(堀取)하여 조사(調査)하였으며, 조사내용별(調査內容別) 결과(結果)는 다음과 같다. 1) 벼와 피의 발아(發芽) 및 입묘양상(立苗樣相)의 차이(差異) 가. 벼는 발아시(發芽時) 초엽과 유근 모두 같은 배반(胚盤)에서 출현(出現)하는데 반해 피는 그와 반대방향(反對方向)에서 출현(出現)하였다. 나. 재배양식(栽培樣式)간의 벼 입묘양상(立苗樣相)은 건답직파(乾沓直播)의 경우 지상부(地上部) 및 지하부생육(地下部生育)이 균형적(均衡的)이었으나 담수직파(湛水直派)는 지하부(地下部) 위주(爲主)의 생육(生育)이 이루어졌고 표면(表面)벼보다 토중(土中)벼의 입묘(立苗가) 더 좋았다. 2) 벼와 피의 생육특성(生育特性) 차이(差異) 가. 초기생육(初期生育)을 통한 벼와 피간의 초장차이(草長差異)는 담수직파(湛水直播)보다는 건답직파(乾沓直播)에서 더 컸고 같은 직파(直播)에서도 피가 표면(表面)벼나 토중(土中)벼보다 컸으며 이앙재배(移秧栽培)에서는 벼가 피보다 지속적으로 우위성을 유지하였다. 나. 근장(根長)은 모든 재배양식(載培樣式)에서 피가 벼보다 컸으며 벼와 피간의 근장(根長) 차이(差異)는 담수(湛水)보다 건답(乾沓)에서, 이앙(移秧)보다 직파(直播)벼에서 유의적(有意的)으로 컸다. 다. 地上部重(지상부중)은 직파(直播)의 경우 건답(乾沓짧)피가 가장 컸으며 벼와 피간(間)의 지상부(地上部) 생육중(生體重) 차이(差異)는 담수(湛水) 보다 건답(乾沓에)에서, 표면(表面)벼보다는 토중(土中)벼가, 그리고 벼보다 피가 컸으나 이앙조건(移秧條件)에서는 이앙(移秧)벼가 피보다 우위에 있었다. 라. 지상부(地下部) 생체중(生體重)은 직파(直播)의 여러 양식간(樣式間)에 차이(差異)를 보이지 않았으나 파종후(播種後) 10일(日) 이후부터 피가 벼를 능가하는 경향이었고 이앙재배(移秧栽培)에서는 벼가 피보다 지속적으로 우위에 있었다. 마. 중경장(中莖長)은 피만이 형성되었고 건답(乾沓)보다는 담수(湛水)에서, 파종(播種)깊이가 클수록 더 컸다. 바. 엽령(葉齡)은 직파재배(直播載培)에서 피가 벼보다 크고, 벼와 피간의 엽령(葉齡) 차이(差異)는 담수(湛水)보다는 건답(乾沓)에서 약간 더 컸으며 이앙재배(移秧我培)에서는 벼가 피보다 컸다. 사. 엽면적지수(葉面積指數)는 벼와 피간의 차이(差異)가 담수직파(湛水直播)보다는 건답직파(乾沓直播)에서 월등히 컸으며 이앙조건(移秧條件)에서 벼가 유의적으로 컸다. 아. 엽록소함량(葉綠素含量)은 각 재배양식(我培樣式)에서 피가 유의적으로 높았으며 담수직파(湛水直播)보다는 이앙(移秧)벼에서, 이앙(移秧)벼보다는 간답직파(乾畓直播)에서 높았다.

• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3404-3412
• /
• 1994

The present study was undertaken to investigate the dry wear process and wear mechanism of the alumina ceramics in the purity variation which are used for the mechanical seal, roll, liner and dies. The wear test was carried out under different experimental condition using the wear testing device and in which the annular surface rubbed on dry sliding condition various sliding speed, contact pressure and sliding distance. In case of alumina purity 95%, there was speed range which wear loss increased rapidly owing to enlargement of heat impact force and temperature rise of wear surface. According as the alumina purity increased, wear loss decreased but alumina purity 85% with much void and defect had the most wear loss than any other alumina purity. The friction coefficient of sliding initial stage of wear curves has a large value but according to increase of sliding distance, it decreased owing to drop of the shear strength of wear surfaces.

• 자원리싸이클링
• /
• 제11권1호
• /
• pp.37-42
• /
• 2002

This study was conducted in order to remove Poly vinyl chloride(PVC) from the waste plastic film mixture. The fittings of Air Table was modified to increase the separation efficiency of PVC and PE(poly ethylene). PE and PVC was successfully separated from PVC-PE film mixture with the yield of PE 90% or more and with his grade of 99% or more, using the improved Air Table. The details of the separation condition and results will be discussed in this paper. Dry separation, Waste plastic film, PVC, Air Table. The details of the separation condition and results will be discussed in this paper.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.31-35
• /
• 2003

Friction in cold forging with mist lubrication is measured with the ring compression test. Small quantity of mist lubricant is sprayed onto the surfaces of cemented tungsten carbide (WC) tools polished to mirror surfaces, and the specimens of pure aluminum are compressed. It is found that spraying small quantity of lubricant $(0.5\;g/m^2)$ is effective to reduce the friction in comparison with the dry condition. The mist particles stick to the tool surface as separated dots, and the behavior of the trapped mist lubricant between the tool and specimen during upsetting is discussed.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.289-293
• /
• 1999

This research was performed to evaluate the longitudinal length change ratio of concrete used the expansive admixture. As the results of this study, the compressive strength was shown the highest value at the used 10% expansive admixture both of the dry and wet curing condition. And the length change ration was shown higher 0.0316% and 0.0529 % than that of control in wet and dry curing condition. But this value was not enough to recover the shrinkage occuring by dry shrinkage. According to this study , we have obtained 10% on normal portland cement concrete as the optimum replacement ration of expansive admixture.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권1호
• /
• pp.7-14
• /
• 2009

Water condensate accumulated on the surface of a fin-and-tube heat exchanger significantly affects its thermal and hydraulic performances. The purpose of this study is to investigate the effects of condensate retention on the air-side heat transfer performance and flow friction for various flow and geometric conditions. Total of twelve samples of slit and plate fin-and-tube heat exchangers are tested under dry and wet conditions. The thermal fluid measurements are made using a psychrometric calorimeter. Frontal air velocity varies in the range from 0.7 m/s to 1.5 m/s. Using the experimental data, presented are heat transfer coefficients in terms of Colburn j-factors and friction factors, and these data are compared with the existing correlations.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.49-55
• /
• 2011

Recently, various efforts to make more speedy and precision machine tool to improve productivity and also various efforts to solve environmental problem are going on, so that dry cutting in manufacturing industry, which needs environmental conscious design and development of manufacturing technique, is becoming a very important assignment to solve. Because dry cutting does not use cutting fluid, we need other methods that can be used instead of cutting fluid, which does cooling, lubricating, chip washing, and anti-corrosion. Especially, because turning is a continuous work, the consideration of tool life and surface roughness due to continuous heat and poor lubrication is important. The purposes of this paper are the consideration of how well the compressed air can work instead of cutting fluid, and also the development of the method to select the optimum machining condition by the minimum numbers of experiments through the Taguchi method.

• 한국초지조사료학회지
• /
• 제15권3호
• /
• pp.157-163
• /
• 1995

The objective of this study is to obtain the basic data for investigating the effects of organic reserves on winter survial or regrowth yield. Dry matter, nitrogen and non-structural carbohydrate content of plants grown under $5^{\circ}C$ or $20^{\circ}C$ of culture temperature during 25 days were investigated. The dry matter content of leaves and roots were significantly reduced under $5^{\circ}C$ compared with $20^{\circ}C$culture condition. Comparing with the dry matter per plant under $20^{\circ}C$, those in leaves and roots under $5^{\circ}C$ decreased to 25% and 10%, respectively, after 25 days of temperature treatment. Total nitrogen content in leaves under $20^{\circ}C$ and $5^{\circ}C$ increased to 68% and 39% compared to the initial lenel(day O), respectively, during 25 days after temperature treatment, Nitrogen content in roots highly increased under 5 C while there was a little change under $20^{\circ}C$ condition. The nitrogen contents in roots under $5^{\circ}C$ and $20^{\circ}C$ were 39.0 and 30.8mgJg DM, respectively, after 25 days of temperature treatment. Total contents of soluble carbohydrate in both leaves and roots under $5^{\circ}C$ were higher than those under $20^{\circ}C$ condition. After 25 days of temperature treatment under$5^{\circ}C$ , their contents in leaves and roots were 1.4 and 2.0 times higher than those of under $20^{\circ}C$ condition. Stach atent in roots under $20^{\circ}C$ was less changed, while thatof under $5^{\circ}C$ greatly increased from 64.8 to 178.7mglg DM duling 25 days. 'Ihese results clearly showed that an accumulation of both nitrogen and non-structural carbohydrate in the plants occured under low temperature condition.e condition.

• Animal Bioscience
• /
• 제34권4호
• /
• pp.539-545
• /
• 2021

Objective: Endometritis is a major disease, that causes infertility in cattle, and is usually categorized as clinical or subclinical endometritis (SCE). The nutritional condition during the dry period is important for recovery after the last stage of the lactation period, and for postpartum production and reproduction. This study aimed to clarify the relationship between nutritional and metabolic characteristics in the dry period, and the risk of postpartum SCE. Methods: Multiparous Holstein dairy cows (n = 25, raised in a tied stall) were used. Endometrial cytological analysis was performed around 30 days post-partum, with 5% to 14% polymorphonuclear (PMN) as a cut-off point to define SCE. Serum levels of glucose, non-esterified fatty acids, β-hydroxybutyric acid (BHBA), blood urea nitrogen, total cholesterol, aspartate aminotransferase, γ-glutamyl transpeptidase, calcium, phosphorus, and magnesium were measured in the cows at the dry period to evaluate energy status, protein metabolism, and mineral metabolism. Results: The incidence of SCE in the cows was 60.0% (n = 15/25) and the mean PMN% in postpartum cows diagnosed as SCE was 8.05%±2.6%. Overall, 17 and 8 samples were collected from the cows in the far-off and close-up periods, respectively. The serum concentration of BHBA in the far-off period and serum glucose concentration in the closeup period were correlated with postpartum PMN% (r = 0.62, p<0.01; r = -0.74, p<0.05, respectively). Serum levels of calcium and magnesium in the dry period were associated with the incidence of postpartum SCE (healthy vs SCE cows, p<0.05). Conclusion: Blood levels of glucose, BHBA, calcium, and magnesium in dry periods could be useful parameters for predicting the risk of postpartum SCE. The present study also suggests that management in the close-up period is essential for promoting recovery from calving fatigue.