제올라이트는 높은 양이온교환능력(CEC)으로 인해 토양개량제의 사용이 고려되어 왔으나, 이에 관한 연구들의 대부분이 제올라이트를 합성하거나 천연제올라이트의 CEC를 증가시키는데 국한되어왔다. 실제로 제올라이트를 토양개량제로 사용하기 위해서는 유실되는 것을 방지하기 위한 과립화 (granulation or pelletizing)가 요구된다. 본 연구는 제올라이트를 토양개량제로 활용하기 위해 이를 포함하는 소성점토의 과립 (calcined clay granule)을 제조하고, 제올라이트의 특성을 최대로 활용할 수 있는 과립의 제조조건을 찾으려 하였다. 천연제올라이트, 고령토, 규석을 재료로 하여, pan granulator와 high shear mixer granulator의 두가지 과립기를 사용하여 과립을 제조하였다. 재료의 혼합비와 과립기의 회전속도 등을 조절하여 과립을 제조하였으며, 이를 $400\sim700^{\circ}C$범위에서 $100^{\circ}C$단위로 소성한 후 파쇄강도 (crushing strength), 기공분포 (pore distribution), CEC를 측정하였다. 토양개량제로 사용할 과립은 취급시에 요구되는 기본적인 강도뿐만 아니라 토양과 혼합된 후 답압(踏壓)에 견디기 위한 강도 또한 요구된다. 본 연구에서는 과립의 답압에 관한 저항성 평가방법을 마련하고, 마른 상태와 젖은 상태에서 과립의 저항성을 측정하였다. 과립기의 회전속도와 가열온도에 비례하여 답압에 대한 저항성은 증가하나 CEC는 감소하였다. Pan granulator는 $700^{\circ}C$이하의 가열에서 적절한 강도를 갖는 과립을 제조할 수 없었으나, high shear mixer granulator는 $500^{\circ}C$이상의 가열에 의해 답압에 저항성을 갖는 과립을 제조할 수 있었다.
화강암과 안산암질 암맥이 공존하고 있는 붕괴사변을 대상으로 지질에 의한 전단강도의 차이를 반영한 3차원 사면안정해석을 수행하였다. 지질이 서로 다른 두 종류의 파괴면에 대한 전단강도를 파악하기 위하여 흙-암 경계면 직접전단시험을 수행하였고, 또한 상부 풍화토층에 대한 실내토질시험을 실시하였다. 시험결과 풍화토층에 비하여 흙-암 경계면의 전단강도가 낮게 나타났다. 사면내 지질분포의 차이가 안정성해석 결과에 영향을 주는 것을 알아보기 위하여 한계평형법을 이용한 2차원사면안정성 해석을 대표단면에서 실시하였으며, 사면내 분포지질에 따라 입력치를 다르게 할 수 있는 3차원사면안정성해석을 실시하여 2차원안정성해석과 그 결과를 비교하였다. 해석결과에 의하면 안전율이 건기시 0.92와 포화시 0.32로 모두 불안정하게 나타난 2차원해석결과와는 달리 3차원해석결과에서는 건기시에 안전율이 1.26, 포화시에 0.55로 나타났다. 이러한 결과는 사면내 지질분포를 고려할 경우 안정성 해석의 결과가 달라질 수 있음을 보여주고 있으며, 우기 직후 붕괴가 일어났던 점을 고려하면 3차원해석결과가 보다 현실적인 것으로 판단된다.
This study was carried out to elucidate the partial substitutability of SB latex with environmental-friendly coating binders for coated paper. Starch-based biobinder, ethylene vinyl acetate and acryl-based binder were evaluated for this purpose. Several combinations of above binders were applied to top layer coating, and properties of coating colors and printability were evaluated. When 20% and 30% of SB latex were substituted by acryl-based synthetic binder, ethylene vinyl acetate and biobinder, the brightness, whiteness and opacity of coated paper were similar to those obtained from SB latex. Ink set and stiffness of coated paper manufactured through 20% and 30% substitution of SB latex by biobinder and EVAc were improved, but dry- and wet-pick strength were decreased. The research works on the improvement of dry- and we-pick strength, mechanical stability and rheological properties at high shear condition should be continued for the commercial application of biobinder, EVAc and acryl-based binder.
이암은 건조 조건에서는 일정한 강도와 강성을 가지나, 지하수 침투 등에 의한 습윤, 포화 시 고유의 강도 및 강성이 저하되어 급속히 풍화되는 특성을 가지며, 포항지역에서 자주 발생하는 절취사면의 활동은 주로 이암이 풍화되어 전단강도가 급격히 저하되는 것으로 볼 수 있다. 본 연구는 시추조사시 강성이 충분한 것으로 평가된 이암층에 PRD강관말뚝을 시공한 후 정재하 시험을 실시한 결과 소요지지력이 부족하여, 이를 보강하기 위한 가장 우수한 방법을 찾기 위하여 여러 가지 공법을 검토하였다. 말뚝지지력 증대에 가장 효과적인 방법을 찾기 위해 말뚝주변 및 선단부에 MSG공법, 마이크로파일 보강후 주변그라우팅공법, 선단보강 그라우팅 및 콘크리트 속채움 등의 방법으로 시험시공을 실시하였고, 시험말뚝에 대한 정재하시험 결과 MSG공법으로 보강한 말뚝의 지지력이 가장 우수함을 알 수 있었다.
화강풍화토와 상용화된 순환잔골재를 활용하여 정해진 혼합비율별로 제작한 혼합토에 대하여 물성 특성, 다짐특성 및 전단특성을 위한 시험을 행하였으며, 시험결과를 분석하여 다음과 같은 결론을 얻었다. A다짐시험 결과 화강풍화토에 비해 순환잔골재는 다짐효과가 낮은 것으로 나타났으나 화강풍화토와 순환잔골재를 혼합한 혼합토의 경우에는 화강풍화토보다도 다짐효과가 높게 나타났으며, 화강풍화토와 순환잔골재의 혼합비율을 중량비 70:30으로 한 경우 최대의 다짐효과를 얻을 수 있었다. 직접전단강도시험 결과 점착력은 모든 함수비에서 화강풍화토의 혼합비율이 커질수록 증가하는 경향이 나타났다. 화강풍화토는 최적함수비 근처에서 최대점착력을 보인 반면 혼합토는 전반적으로 최적함수비의 습윤측에서 상대적으로 점착력이 크게 나타났는데, 이러한 경향은 순환잔골재에 잔류하고 있는 시멘트 성분의 영향으로 판단된다. 내부마찰각은 화강풍화토에서 최적함수비 근처에서 최대로 나타난 반면, 순환잔골재 및 혼합토에서는 건조측에서 오히려 크게 나타나는 경향을 보이고 있다. 또한, 순환잔골재의 혼합비율이 높아질수록 내부마찰각은 증가하는 것으로 나타났다.
본 연구의 목적은 천연자원이며 보속적인 생산이 가능한 식물성기름(콩기름)을 오존 산화 처리에 의한 구조적인 변성을 시도하여 이를 바탕으로 친환경 목재 접착제를 개발하는 것이다. 식용 콩기름을 사용하여 시간당 약 7.13 g의 오존을 발생시켜 15분, 30분, 60분, 120분간 오존산화 처리한 후 화학적 변화를 알아보기 위하여 FT-IR을 측정하였으며 오존 산화 처리된 콩기름/pMDI를 중량비로 1:1로 혼합하여 접착제를 제조하여 상태, 준내수 및 내수 인장전단 접착력을 평가하였다. FT-IR 측정 결과, 콩기름은 $3010cm^{-1}$ 부근에 불포화 이중결합에 기인하는 흡수를 나타내었으며 오존산화가 진행될수록 $3010cm^{-1}$ 부근의 흡수가 사라지고 $1700cm^{-1}$ 부근의 카르복실기 또는 알데히드의 흡수가 크게 나타났다. 인장전단 접착력의 경우 상태, 준내수 접착력 시험 결과 모든 오존 산화 처리 시간에서 KS 합판 접착성 기준인 $7.0kgf/cm^2$를 안정적으로 상회하였으며 오존산화 처리 반응시간이 증가함에 따라 접착력도 증가하여 60분 처리에서 최대의 접착력을 보이다 120분 처리에서는 감소하는 경향을 나타내었다. 내수 접착력의 경우 30분, 60분, 120분 처리에서는 접착 기준을 만족 시키는 것을 확인할 수 있었다.
One of the latest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not dry but left moist before application of the bonding primer Ideally the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically, contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during cavity preparation. The aim of this study was to evaluate the effect of contamination by hemostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were removed soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive papers on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows : Group 1: Dentin surface was not etched and not contaminated by hemostatic agents. Group 2: Dentin surface was not etched but was contaminated by Astringedent$^{\circledR}$(Ultradent product Inc., Utah, U.S.A.) Group 3: Dentin surface was not etched but was contaminated by Bosmin$^{\circledR}$(Jeil Pharm, Korea.). Group 4: Dentin surface was not etched but was contaminated by Epri-dent$^{\circledR}$(Epr Industries, NJ, U.S.A.). Group 5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6: Dentin sorface was etched and contaminated by Astringedent$^{\circledR}$. Group 7 : Dentin surface was etched and contaminated by Bosmin$^{\circledR}$. Group 8: Dentin surface was etched and contaminated by Epri-dent$^{\circledR}$. Group 9: Dentin surface was contaminated by Astringedent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 10: Dentin surface was contaminated by Bosmin$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 11 : Dentin surface was contaminated by Epri-dent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. After surface conditioning, F2000$^{\circledR}$ was applicated on the conditoned dentin surface The teeth were thermocycled in distilled water at 5$^{\circ}C$ and 55$^{\circ}C$ for 1,000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the knife-edge shearing rod of the Universal Testing Machine(Zwick Z020, Zwick Co., Germany) running at a cross head speed or 1.0 mm/min. Group 2 showed significant decrease in shear bond strength compared with group 1 and group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.
Gholami, M.;Sam, A.R. Mohd;Marsono, A.K.;Tahir, M.M.;Faridmehr, I.
Steel and Composite Structures
/
제20권5호
/
pp.999-1022
/
2016
The use of Carbon Fiber Reinforced Polymer (CFRP) to strengthen steel structures has attracted the attention of researchers greatly. Previous studies demonstrated bonding of CFRP plates to the steel sections has been a successful method to increase the mechanical properties. However, the main limitation to popular use of steel/CFRP strengthening system is the concern on durability of bonding between steel and CFRP in various environmental conditions. The paper evaluates the performance of I-section steel beams strengthened with pultruded CFRP plate on the bottom flange after exposure to diverse conditions including natural tropical climate, wet/dry cycles, plain water, salt water and acidic solution. Four-point bending tests were performed at specific intervals and the mechanical properties were compared to the control beam. Besides, the ductility of the strengthened beams and distribution of shear stress in adhesive layer were investigated thoroughly. The study found the adhesive layer was the critical part and the performance of the system related directly to its behavior. The highest strength degradation was observed for the beams immersed in salt water around 18% after 8 months exposure. Besides, the ductility of all strengthened beams increased after exposure. A theoretical procedure was employed to model the degradation of epoxy adhesive.
고온경화형(高温硬化型) 수용성(水溶性) 요소(尿素) 페놀공축합수지(共縮合樹脂)의 제조(製造)몰비(比)를 각각 달리 제조(製造)하고 페놀수지(樹脂)의 경우 촉매(觸媒)를 달리 제조(製造)하여 이들 접착제(接着劑)의 성질(性質)과 그 접착강도(接着強度)를 Kapur 합판제조(合板製造)를 통(通)하여 구명(究明)한 결과(結果) 다음과 같은 결론(結論)를 얻었다. 1) 각(各) 접착제(接着劑)로써 열압(熱壓)하여 제조(製造)된 합판(合板)의 비중(比重)은 단판(單板)의 비중(比重)에 따른 영향(影響)을 받아 0.67부터 0.82까지를 보였으며 합판(合板)의 기건함수율(氣乾含水率)은 모두 KS규격(規格)을 만족시켰다. 2) 상태접착력(常態接着力) 및 준내수접착력(準耐水接着力)의 경우, 페놀수지(樹脂)를 제외하고 60%고형분수지(固形分樹脂)가 50%고형분수지(固形分樹脂)보다 높은 값을 보였고 요소(尿素)와 페놀의 공축합비(共縮合比)에 따른 결과(結果)는 20%페놀함량(含量)의 요소(尿素) 폐놀공축합수비(共縮合樹脂)가 제일 높았고 70% 페놀함량(含量)의 수지(樹脂)가 제일 낮았다. 목분증량(木粉增量)은 50%페놀함량(含量) 이상(以上)의 공축합수비(共縮合樹脂)에서 접착력(接着力) 상승에 유효(有效)하였고 특히 50%고형분(固形分)의 경우, 알카리촉매 페놀수지(樹脂)를 포함하여 현저하였다. 페놀수지제법(樹脂製法) 중 양자겸용법이 최고(最高)의 접착력(接着力)을 과시하였고 알카리촉매법이 제일 낮았다. 준내수접착력(準耐水接着力)의 경우 요소수지(요소수지)는 제일 하위집단(下位集團)에 속하였다. 3) 내수접착력(耐水接着力)의 경우, 페놀수지제법(樹脂製法) 중 알카리 산(酸) 양자겸용법(兩者謙用法)을 택하는 것이 가장 좋고 알카리촉매법(觸媒法)은 반드시 목분증량(木粉增量)을 하는 것이 필요(必要)하다. 10%페놀함량(含量) 요소(尿素) 폐놀 공축합수비(共縮合樹脂)도 유효(有效)한 내수접착력(耐水接着力)을 과시하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.