• KSBB Journal
• /
• 제23권5호
• /
• pp.408-412
• /
• 2008

본 연구에서는 당뇨병치료제인 로시글리타존약물를 생분해성 PLGA 나노입자에 봉입시킴으로서 위장흡수율과 물에 대한 용해도를 증가시키기 위한 나노제제 개발에 기반을 두고 있다. 특히 제조조건에 따라 형태 및 크기가 조절가능한 나노입자를 제조하고자 하였고, 실험결과 Emulsion-evaporation방법을 사용하여 100-150 nm 크기의 고른 입자분포를 가진 나노입자를 제조하였다. 다양한 농도의 약물 존재하에서 나노입자를 제조함으로서 1%까지의 약물이 80% 이상의 봉입율로 제조될 수 있음을 확인하였다. 또한 나노입자의 크기는 PVA양을 조절하면서 크기분포를 제어하였다. 36시간 동안의 용출실험 결과 초기 약간의 Burst effect가 있었으나 36시간동안 일정하게 약물이 용출되어 나옴을 확인하였다. 앞으로의 연구를 통해, 고효율의 경구제제용 당뇨병치료제 운반체 개발에 중점을 둘 예정이다.

• Journal of Pharmaceutical Investigation
• /
• 제35권3호
• /
• pp.143-150
• /
• 2005

Solid lipid nanoparticles(SLNs) are particulate systems for parenteral drug administration and have good biocompatibility and stability. SLNs were prepared with lauric acid, as the lipid core. Tween 20 and tween 80 were used as surfactant. 5-fluorouracil and l-benzoyl-5-fluorouracil were used as model drugs. Drug-loaded SLNs were prepared by the hot homogenization technique in order to evaluate the physical stability, entrapment efficiency of drugs as well as release profile. The particle size of SLNs was $40{\sim}600$ nm. By increasing speed, the mean particle size of SLNs was decreased. And entrapment efficiency in the case of using 1-Benzoyl-5-fluorouracil was higher than using 5-Fluorouracil. The higher surfactant concentration, the faster release rate at the range of $1.5{\sim}2.5%$.

• Biomolecules & Therapeutics
• /
• 제9권4호
• /
• pp.298-306
• /
• 2001

To develop a novel transdermal delivery system of loxoprofen (LP), a potent antiinflammatory and analgesic agent, the effects of vehicle composition and drug loading dose on the skin permeation property were investigated. And in vivo skin absorption property studied by analysing the $C_{max}$ and AUC was investigated after applying the developed plaster systems on rabbit back skin. Addition of isopropyl myristate (IPM) and IPM-diethylene glycol monoethyl ether (DGME) cosolvent in the plaster showed higher permeation rates than those from propylene glycol laurate-DGME cosolvent systems. As the concentration of LP in the plaster increased from 0.56 mg/$\textrm{cm}^2$ to 1.19 mg/$\textrm{cm}^2$, the drug release and skin permeation rates increased linearly. At loading dose of 1.19 mg/$\textrm{cm}^2$, the flux reached 35.6 $\mu$g/$\textrm{cm}^2$/hr. New LP plasters showed a good adhesive property onto skin, and showed no crystal formation. The AU $C_{0-24hr}$ and $C_{max}$ after dermal application of LP plaster (60 mg/70 $\textrm{cm}^2$) were found to be 6951$\pm$230 ng.hr/ml and 400$\pm$44 ng/ml, respectively. And the plasma concentration maintained above 300 ng/ml up to 24 hr period. In the carrageenan-induced rat paw edema test, LP plaster showed similar inhibition rate with marketed ketoprofen (Ketoto $p^{R}$) plaster.aster.r.

• Journal of Pharmaceutical Investigation
• /
• 제27권2호
• /
• pp.133-137
• /
• 1997

Buccal absorption test of omeprazole in human was performed to determine the permeability of the drug molecule through oral mucous membrane. Oral mucosal adhesive tablets of omeprazole were prepared by compressing the omeprazole with a mixture of sodium alginate and hydroxypropylmethyl cellulose (HPMC) as bioadhesive polymers, magnesium oxide (MgO) as a stabilizer and sodium carboxymethyl cellulose (Na CMC) or cros-carmellose sodium (Ac-Di-Sol) as disintegrants. The bioadhesive force, stability in saliva and release characteristics of the tablets were evaluated. Omeprazole was absorbed about 23% in 15 min through human buccal mucous membrane. Furthermore, omeprazole was stable in saliva for more than 8 hrs when MgO was added to the tablet as the amount of 2.5 fold of omeprazole. The release rate of omeprazole was increased with increasing the amount of sodium alginate in the tablet. From these results, it is suggested that tablets composed of [omeprazole/HPMC/sodium alginate/MgO/Ac-Di-Sol and/or Na CMC (20/6/24/50/10) (mg/tablet)] are potential candidate for buccal drug delivery system.

• Archives of Pharmacal Research
• /
• 제27권7호
• /
• pp.763-768
• /
• 2004

To investigate the feasibility of developing a new quercetin transdermal system, a preformulation study was carried out. Therefore, the effects of vehicles and pressure-sensitive adhesives (PSA) on the in vitro permeation of quercetin across dorsal hairless mouse skin were studied. Among vehicles used, propylene glycol monocaprylate (PGMC) and propylene glycol mono-laurate were found to have relatively high permeation flux from solution formulation (i.e., the permeation fluxes were 17.25$\pm$1.96 and 9.60$\pm$3.87 $\mu\textrm{g}$/$\textrm{cm}^2$/h, respectively). The release rate from PSA formulations followed a matrix-controlled diffusion model and was mainly affected by the amount of PSA and drug loaded. The overall permeation fluxes from PSA formulations were less than 0.30 $\mu\textrm{g}$/$\textrm{cm}^2$/h, which were significantly lower compared to those obtained from solution formulations. The lower permeation fluxes may be due to the decrease of solubility and diffusivity of quercetin in the PSA layer, considering the fact that the highest flux of 0.26 $\mu\textrm{g}$/$\textrm{cm}^2$/h was obtained with the addition of 0.2％ butylated hydroxyanisole in PGMC-diethyl-ene glycol monoethyl ether co-solvents (80-85 ： 15-20, v/v). Taken together, these observations indicate that improvement in the solubility and diffusivity of quercetin is necessary to realize fully the clinically applicable transdermal delivery system for the drug.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.570-573
• /
• 2005

분무법을 이용한 alginate microsphere를 제조한 결과 구형을 형성하는 것을 관찰하였고, 이러한 alginate microsphere에서 alginate 농도가 증가할수록 크기는 작아지고, chitosan/alginate microsphere에서 chitosan의 농도가 증가할수록 그 크기가 증가하는 것을 확인하였다. OVA의 방출정도는 alginate microsphere에서 alginate 농도가 증가할수록 잘 이루어지지 않았고, HCl buffer에서보다 PBS buffer에서 방출이 잘되는 것을 확인하였다. Chitosan/alginate microspheres에서는 chitosan의 농도가 증가할수록 방출이 잘되지 않았고, 이는 alginate microsphere에서와 마찬가지로 PBS buffer에서 방출이 잘 이루어지는 것을 확인하였다.

• Journal of Pharmaceutical Investigation
• /
• 제5권1호
• /
• pp.41-48
• /
• 1975

Extrusion-Spheronization Processing (ESP) was applied to preparate sustained release spherical particles as a form of matrix spherical particle (MSP). dl-methylephedrine HCI (ME) was the drug chosen and several dissolution retardants and binders were selected to estimate a relatively good formulation on this purpose. The effect of physicochemical nature, concentration, and solvents of these dissolution retardants and binders on regularity in shape of MSP and in vitro release rate was investigated. The effect of Particle size of matrix particles was also evaluated. It is, therefore, concluded that this ESP would be a relatively good preparation method of sustained release MSP of ME which has the sustained action of about 5 and 8 hours by formulating of ethylcellulose and ethylcellulose-paraffin as a dissolution retardant, respectively, and then ethylcellulose solution of 80% EtOH is recommended as a binder.

• Journal of Pharmaceutical Investigation
• /
• 제37권4호
• /
• pp.229-235
• /
• 2007

Multi-layered granules were prepared by a fluidized-bed coater and uniformed granules were obtained with a size range between $950{\sim}1000{\mu}m$ in diameter. The granule system was composed of three layers, i.e. seed layer with sugar sphere bead and a water-swellable polymer, middle layer with a drug, solubilizer and polymer, and the top layer of porous membrane with a polymeric binder. The aim of this work is to find out the dependence of a drug dissolution rate on the amount of a water-soluble binder and a solubilizer in the granule system. The results showed that the higher amount of hydrophilic binder in the porous membrane, gave the bigger pore size and porosity and made faster dissolution rate and also the higher amount of solubilizer in drug layer enhanced the dissolution rate of drug.

• KSBB Journal
• /
• 제31권4호
• /
• pp.219-227
• /
• 2016

Valsartan, a drug for the treatment of cardiovascular disease, exhibited low bioavailability which was caused by, at least in part, limited solubility at low pH. Present investigation deals with the preparation and characterization of gastro-retentive drug delivery system (GRDDS) using valsartan solid dispersion. We prepared solid dispersion using surfactants (Poloxamer 407) and alkalizer ($Na_2CO_3$) which may to be useful for improving solubility of valsartan at low pH and evaluated by saturated solubility of valsartan in distilled water. Valsartan gastro-retentive (GR) tablets containing solid dispersion prepared and evaluated by weight variation, floating time and dissolution rate. Compression at lower pressures resulted in the tablets floating over simulated gastric fluid (pH 1.2) for more than 17 h. In vitro release of valsartan from GR tablet was dependent on the amount of poloxamer 407 and hydroxypropyl methylcellulose. On the basis of evaluation parameter, formulation E-3 was selected as a final formulation. Therefore, it can be concluded that the GR tablets containing solid dispersion may be exploited successfully for the delivery of poorly drug such as valsartan.

• 대한의용생체공학회:의공학회지
• /
• 제10권3호
• /
• pp.237-242
• /
• 1989

The physical properties and drug release behaviours of polyethylene glycol grafted poly ${\gamma}$- benzyl L-glutamate (PEG- g- PBLG), polyethylene glycol crosslinked poly ${\gamma}$-benzyl L- glutamate(PEG-c-PBLG), and PBLG homopolymer are compared. PBLG containing PEG segements showed higher wettability and larger enlongation than PBLG homoplymer, but lower elastic modulus. The release rate of rhodamine is strongly influenced by the wettability of the polymer. Rhodamine is more rapidly released from PEG-c-PBLG membrane having a larger water contact angle than from other polymer having a lower water contact angle. The surfaces of PBLG derivative membranes are modified by substitution reaction using hydroxyalkylamine. The resulting polymer membranes showed hider wettability and swelling ratio than virgin membranes.