• Journal of Pharmaceutical Investigation
• /
• 제21권4호
• /
• pp.237-245
• /
• 1991

Matrix type silicone rubber devices were designed for long-term implantable drug delivery system. Release controlling agents (RCA), i.e., polypropylene glycol, polyethylene glycol, were employed to control drug release from the devices. The release rate of drug from RCA dispersed silicone matrices was mainly dependent on hydrophilicity-hydrophobicity of drug and RCA. In the case of hydrophilic drug, the release from the RCA dispersed matrix was regulated by swelling kinetics. Especially when the relatively hydrophobic polypropylene glycol was used, swelling control mechanism induced zero-order release kinetics. Whereas, the release of hydrophobic drug was resulted from partition mechanism. The effect of RCA was to increase drug diffusivity.

• Journal of Pharmaceutical Investigation
• /
• 제31권1호
• /
• pp.19-25
• /
• 2001

The purpose of this study was to use a ternary polymeric matrix system for high drug loading of a highly soluble drug for controlled release delivery. The controlled drug delivery of diltiazem HCl (solubility > 50% in water at $25^{\circ}C$) with high loading dose (the final loading dose of drug was 34%) from a ternary polymeric matrix (gelatin, pectin, HPMC) was successfully accomplished. This simple monolithic system with 240 mg drug loading provided near zero-order release over a 24 hour-period by which time the system was completely dissolved. The release kinetics of diltiazem HCl tablet with high loading dose from the designed ternary polymeric system was dependent on the ratios of HPMC : pectin binary mixture. The release rate increased as pectin : HPMC ratio were increased. Swelling behavior of the ternary system and the ionic interaction of formulation components with cationic diltiazem molecule appear to control drug diffusion and the release kinetics. Comparable release profiles between commercial product and the designed system were obtained. The binding study between gelatin with diltiazem HCl showed the presence of two binding sites for drug interaction with subsequent controlled diffusion upon swelling. This designed delivery system is easy to manufacture and drug release behavior is highly reproducible and offers advantages over the existing commercial product.

• Journal of Pharmaceutical Investigation
• /
• 제26권3호
• /
• pp.201-205
• /
• 1996

Poloxamer, block copolymers of ethylene oxide and propylene oxide was crosslinked by diisocyanates and triisocyanates to form water-swellable, physically strong, rubber-like elastic, high biocompatible polyurethanes. The isocyanate-hydroxyl stoichiometry was kept 1:1, but the crosslinking density was varied. The variations examined were the ratio of diisocyanate and triisocyanate. The delivery of two drugs of different water solubilities from hydrogel matrices was studied. It appeared that the drug nature greatly influenced its release kinetics possibly due to drug-polymer interactions. The release profiles, however, could be modified to a great extent by adjusting the polymer network structure Generally the high crosslinking density was required for prolonged drug delivery.

• Archives of Pharmacal Research
• /
• 제19권1호
• /
• pp.1-5
• /
• 1996

Laminated films composed of drug-containing reservoir layer and drug-free membrane were prepared. Zero-order drug release with lag time was achieved by laminating drug-free film onto the reservoir layer, while burst effect was observed on cast-on film. The rate controlling membrane was either attached to or cast directly into the reservoir. The release rate was independent on the reservoir composition but dependent on the composition of rate-controlling membrane. In growth inhibitory test of cephalexin from Eudragit RS film to Streptococcus Mutans, the disk even after release test for 72 hours showed more bacterial growth inhibition than that of control. Permeation of drug through rat skin was proportional to the HPC fraction in the film. We could control the release of cephalexin from the film by changing the fraction of Eudragit RS, HPC and DEP content. Consequently, Eudragit RS/HPC film was found to be very effective system for local delivery of drugs.

• 대한화학회지
• /
• 제57권4호
• /
• pp.493-498
• /
• 2013

리포솜은 표적 약물을 봉입하여 병소에 안전하게 전달할 수 있는 약물전달체로서 연구되고 있다. 그러나 일반적인 리포솜은 표적부위에서 약물방출이 제한적인 문제점이 있다. 따라서 본 연구에서는 리포솜의 안정성을 향상시키고 표적부위에서 외부 초음파로부터 약물의 방출을 극대화시키기 위하여 하이드록시아파타이트(hydroxyapatite, HA)가 코팅된 리포솜을 개발하였다. 대조군 리포솜은 인지질과 콜레스테롤을 이용하여 제조하였고, 대조군 리포솜의 표면에 칼슘 아세테이트, 포스포릭에시드, 그리고 25% 암모니아용액을 이용하여 HA를 코팅하였다. 모델 약물로는 독소루비신을 사용하였다. HA코팅 리포솜의 크기는 120 nm 이었고, 약물봉입효율은 95% 이상이었다. 30% 혈장용액 내에서 HA코팅 리포솜의 입자크기는 일정한 상태를 유지하였으며, 대조군 리포솜은 크기가 1.4배 증가하였다. 외부 초음파 자극에 의한 리포솜으로부터 약물 방출을 유도한 후, 방출된 약물의 세포 이입율은 HA 코팅된 리포솜이 3배 이상 대조군 리포솜에 비하여 증가하였다. 본 연구에서는 외부 초음파 자극에 의하여 리포솜으로부터 약물의 방출을 극대화시키기 위한 초음파 민감형 리포솜을 개발하였고, 본 제형은 표적부위에서 약물의 방출을 효과적으로 제어하기 위한 분야에 활용이 가능할 것이다.

• Archives of Pharmacal Research
• /
• 제18권3호
• /
• pp.183-188
• /
• 1995

Polymeric reinforcement and coatings of alginate beads were carried out to control the release rate of drug from alginate beads. A poorly water-soluble ibuprofen (IPF) was selected as a model drug. A commercially available $Eudragit^{\circledR}$ RS100 was also used as a polymer. Effects of polymeric contents, the presence of plasticizers and amount of drug loading on the release rate of drug were investigated. The release rate of drug from alginate beads in the simulated gastric fluid did not occur within 2 h but released immediately when dissolution media were switched to the simulated intestinal fluid. No significant difference of release rate from polymer-reinforced alginate bead without plasticizers was observed when compared to plain (simple) beads. However, the release rate of drug from polymer-reinforced alginate beads was further sustained and retarded when aluminium tristearate (AT) as a plasticizer was added to polymer. However, polyethylene glycol 400 (PEG400) did not change the release rate of drug from alginate beads although PEG400 was used to improve dispersion of polymer and sodium alginate, and plasticize $Eudragit^{\circledR}$ RS100 polymer. The presence of plasticizer was crucial to reinforce alginate gel matrices using a polymer. As the amount of drug loading increased, the release rate of drug increased as a result of decreasing effects of polymer contents in matrices. The significantly sustained release of drug from polymer-coated alginate beads occurred as the amount of polymer increased because the thickness of coated membrane increased so that cracks and pores of the outer surface of alginate beads could be reduced. The sustained and retarded action of polymer-reinforced and coated beads may result from the disturbance of swelling and erosion (disintegration) of alginate beads. From these findings, polymeric-reinforcement and coatings of alginate gel beads can provide an advanced delivery system by retarding the release rate of various drugs.

• Journal of Pharmaceutical Investigation
• /
• 제19권4호
• /
• pp.173-178
• /
• 1989

Drug release rates from copolymer hydrogels were controlled by their hydrophilic-hydrophobic balances. As a model copolymer hydrogel, poly(acrylamide-co-styrene) was synthesized at different monomer composition. Release mechanisms of propranolol-HCI from the copolymer matrices were investisated. Swelling rates of the copolymer hydrogels retarded as their hydrophobicity increased. Swelling kinetics of the copolymer hydrogels regulated drug release rates via polymer relaxation controlled release mechanisms. Zero order drug release could thus be achieved within certain periods.

• 약학회지
• /
• 제55권4호
• /
• pp.284-288
• /
• 2011

The test method for biologics of lot release system is based on 'Test procedure and specification for biological products,' generally, thimerosal content is measured by chemical analysis using O.D. In this study, the comparative analysis was carried out using the gold amalgamation method for thimerosal content was compared to the existing methods, which are described above. The gold amalgamation method, which uses atomic absorption spectrophotometry, was meets all the method validation acceptance criteria. It is considered to be proper as the assay and identification test for thimerosal. In this study, the comparative analysis was performed three times. As a result, gold amalgamation method is more convenient and easy to perform as this assay doesn't have pre-treatment procedure. Also this assay showed good precision and reproducibility compared to the conventional method. Therefore, it is appropriate to alternate the assay method of thimerosal from the conventional chemical analysis to gold amalgamation method to improve the credibility of lot release system and the quality control of biologics, by standardizing test method.

• 약학회지
• /
• 제41권1호
• /
• pp.22-29
• /
• 1997

Poloxamer-poly (acrylic acid) (PAA) interpenetrating polymer networks (IPNs) were prepared via matrix polymerization of acrylic acid with poloxamer prepolymer. The equilibrium s welling of poloxamer/PAA IPNs was determined in various pH medium. The swelling of poloxamer/PAA IPNs was more affected by pH difference compared with the swelling of homo PAA gel due to protonation and deprotonation of the PAA network, followed by reversible formation and dissociation of the interpolymer complex due to hydrogen bonding between acidic hydrogens and ether oxygens. Nonionic/anionic/cationic drugs were incorporated into IPN matriceds as a model drug and their release behavior was studied. Nonionic, drug revealed release patterns depending solely on pH dependent swelling kinetics. In contrast, the release of ionic drugs was significantly affected by ionic drug-polymer interaction as well as the swelling kinetics.

• KSBB Journal
• /
• 제14권3호
• /
• pp.297-302
• /
• 1999

Poly(DL-lactide)로 피막된 고분자 매트릭스를 약물전달시스템에 이용하기 위해 키토산, 키토산 염산염 및 술폰화 키토산으로 제조되었다. 모델 약물로 프레드니솔론을 사용하는 본 약물방출에 관한 연구는 pH 1.2 염산 용액에서 실험을 하였다. 약물 방출 속도는 고분자 매트릭스의 함유량이 증가할 수록 감소하였다. 피막된 고분자 매트릭스의 종류에 따라 지연된 약물의 방출시간은 키토산의 경우가 가장 길었으며, 술폰화 키토산, 키토산 염산염의 순서였다. DL-PLA로 피막된 고분자 매트릭스가 피막되지 않는 고분자 매트릭스 보다 약물 방출시간이 2배 정도의 지연되었을 뿐만 아니라 초기에 약물 과잉방출 현상도 작아 피막된 경우가 방출 조절형 제재로서 더 바람직한 결과를 보였다. 따라서 DL-PLA로 피막된 고분자 매트릭스는 장시간의 약물 방출을 위한 약물전달체로써의 응용이 기대된다.