• The Journal of the Convergence on Culture Technology
• /
• v.10 no.2
• /
• pp.531-536
• /
• 2024

Control drones, which are recently classified as smart agricultural machines in the agricultural field, are striving to build smart control and automatic control systems by combining hardware and software in order to shorten working hours and increase the effectiveness of control in the aging era of rural areas. In this paper, the characteristics of the nozzle dedicated to the control drone were analyzed as a basic study for the establishment of management control and automatic control systems. In order to consider various variables such as the type of various drone models, controller, wind, flight speed, flight altitude, weather conditions, and UAV pesticide types, related studies are needed to be able to present the drug spraying criteria in consideration of the characteristics and versatility of the nozzle. Therefore, to enable the consideration of various variables, flow analysis (CFD) simulation was conducted based on the self-designed nozzle, and the theoretical and experimental values of the droplet distribution were compared and analyzed through water reduction experiments. In the future, we intend to calculate accurate scattering in consideration of various variables according to drone operation and use it in management control and automatic control systems.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.2
• /
• pp.109-117
• /
• 2022

This paper proposes a method for detecting flight anomalies of drones through the difference between the command of flight controller (FC) and the navigation solution. If the drones make a flight normally, control errors generated by the difference between the desired control command of FC and the navigation solution should converge to zero. However, there is a risk of sudden change or divergence of control errors when the FC control feedback loop preset for the normal flight encounters interferences such as strong winds or navigation sensor abnormalities. In this paper, we propose the method with a deep neural network model that predicts the control error in the normal flight so that the abnormal flight state can be detected. The performance of proposed method was evaluated using the real-world flight data. The results showed that the method effectively detects anomalies in various situation.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.1
• /
• pp.227-260
• /
• 2018

Recently, as the use of drones increases, the risk of drone accidents and third-party property damage is also increasing. In Korea, due to the recent increase in drone use, accidents have been frequently reported in the media. The number of reports from citizens, and military and police calls regarding illegal or inappropriate drone use has also been increasing. Drone operators may be responsible for paying damages to third parties due to drone accidents, and are liable for paying settlements due to illegal video recording. Therefore, it is necessary to study the idea of providing drone insurance, which can mitigate the liability and risk caused by drone accidents. In the US, comprehensive housing insurance covers damages caused by recreational drones around the property. In the UK, when a drone accident occurs, the drone owner or operator bears strict liability. Also, in the UK, drone insurance joining obligation depends on the weight of the drones and their intended use. In Germany, in the event of personal or material damage, drone owner bears strict liability as long as their drone is registered as an aircraft. Germany also requires by law that all drone owners carry liability insurance. In Korea, insurance is required only for "ultra-light aircraft use businesses, airplane rental companies and leisure sports businesses," where the aircraft is "paid for according to the demand of others." Therefore, it can be difficult to file claims for third party damages caused by unmanned aerial vehicles in personal use. Foreign insurance companies are selling drone insurance that covers a variety of damages that can occur during drone accidents. Some insurance companies in Korea also have developed and sell drone insurance. However, the premiums are very high. In addition, drone insurance that addresses specific problems related to drone accidents is also lacking. In order for drone insurance to be viable, it is first necessary to reduce the insurance premiums or rates. In order to trim the excess cost of drone insurance premiums, drone flight data should be accessible to the insurance company, possibly provided by the drone pilot project. Finally, in order to facilitate claims by third parties, it is necessary to study how to establish specific policy language that addresses drone weight, location, and flight frequency.

• Journal of Korea Multimedia Society
• /
• v.25 no.2
• /
• pp.237-246
• /
• 2022

Among the technologies of the 4th industrial revolution, drones that have grown rapidly and are being used in various industries can be operated by the pilot directly or can be operated automatically through programming. In order to be controlled by a pilot or to operate automatically, it is essential to predict and analyze the optimal path for the drone to move without obstacles. In this paper, after securing and analyzing the pilot training dataset through the unmanned aerial vehicle piloting training platform designed through prior research, the profile of the dataset that should be preceded to search and derive the optimal route of the unmanned aerial vehicle was designed. The drone pilot training data includes the speed, movement distance, and angle of the drone, and the data set is visualized to unify the properties showing the same pattern into one and preprocess the properties showing the outliers. It is expected that the proposed big data-based profile can be used to predict and analyze the optimal movement path of an unmanned aerial vehicle.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.3
• /
• pp.486-492
• /
• 2018

Black carbon concentrations were measured along the altitude at various locations using a drone coupled with a small black carbon detector. The measurement locations are Eunseok Mountain, downtown, four places in KOREATECH campus, Byeongcheon, Cheonan, Chungcheongnam-do, and Chungbu Expressway in Ochang-eup, Cheongju, Chungcheongbuk-do. The average concentration of black carbon measured in Eunseok Mountain was $1.64{\mu}g/m^3$ and the average concentration near the Chungbu Expressway was measured to be $3.86{\mu}g/m^3$. The average concentrations of four places inside campus ranged from 1.37 to $2.67{\mu}g/m^3$. The concentration of black carbon at all places tended to be slightly decreased according to the altitude, but the influence of pollution source, geometry, wind speed, and wind direction are thought to be larger than the effect of altitude. Effect of air flow caused by drone flight on the measurement of black carbon were investigated and it resulted in that the measurement of BC concentration was affected by less than 5%.

• Electronics and Telecommunications Trends
• /
• v.35 no.4
• /
• pp.81-90
• /
• 2020

The use of machine learning technologies such as deep and reinforcement learning has proliferated in various domains with the advancement of deep neural network studies. To make the learning successful, both big data acquisition and fast processing are required. However, for some physical world applications such as autonomous drone flight, it is difficult to achieve efficient learning because learning with a premature A.I. is dangerous, cost-ineffective, and time-consuming. To solve these problems, simulation-based approaches can be considered. In this study, we analyze recent trends in drone simulation technologies and compare their features. Subsequently, we introduce Octopus, which is a highly precise and scalable drone simulator being developed by ETRI.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.470-477
• /
• 2022

EOTS for drones is showing another aspect of market expansion in detection and recognition areas previously occupied by artificial satellites. The two-axis EOTS for drones controls the vibration or disturbance caused by the drone during the mission so that EOTS can accurately recognize the goal. Vibration generated by drones is transmitted to EOTS. Therefore, it is essential to develop a stabilization controller that attenuates vibrations transmitted from drones so that EOTS can maintain the viewing angle. Therefore, it is necessary to standardize drone disturbance and secure the performance of EOTS disturbance attenuation controller optimized for disturbance level through this. In this paper, a method of standardizing drone disturbance applied to EOTS is studied, through which EOTS controller simulation is performed and stabilization controller shape is selected and designed.

• ETRI Journal
• /
• v.43 no.4
• /
• pp.580-593
• /
• 2021

When operating in confined spaces or near obstacles, collision-free path planning is an essential requirement for autonomous exploration in unknown environments. This study presents an autonomous exploration technique using a carefully designed collision-free local planner. Using LiDAR range measurements, a local end-point selection method is designed, and the path is generated from the current position to the selected end-point. The generated path showed the consistent collision-free path in real-time by adopting the Euclidean signed distance field-based grid-search method. The results consistently demonstrated the safety and reliability of the proposed path-planning method. Real-world experiments are conducted in three different mines, demonstrating successful autonomous exploration flights in environment with various structural conditions. The results showed the high capability of the proposed flight autonomy framework for lightweight aerial robot systems. In addition, our drone performed an autonomous mission in the tunnel circuit competition (Phase 1) of the DARPA Subterranean Challenge.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.3-4
• /
• 2020

공연을 위한 드론 군집비행의 제어시스템에 관한 기존의 연구 결과들은 실시간으로 반응하지 않으며, 비숙련자가 제어하기 어렵다는 문제점이 있다. 본 논문에서는 첫 번째로 HCI를 기반으로 한 웨어러블 형태의 장갑 컨트롤러를 사용한다. 두 번째로 각각의 음 정보에 실시간으로 반응하도록 FFT를 사용한 주파수 정보를 컴퓨터로 수신 받는다. 세 번째로 각각의 군집비행 움직임 정보를 복수의 드론에게 송신하는 새로운 방법의 드론 실시간 군집비행 제어시스템을 설계하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.131-132
• /
• 2020

본 논문에서는 OpenCV의 Marker Detection 기술을 이용하여 특정지점의 마커를 영상처리기술로 인식하여 드론의 자동 이착륙 및 주변 위기상황, 미션수행 등을 마커를 통해서 드론에게 전달하여 비행 제어할 수 있는 체계를 개발한다. 드론은 OpenCV Aruco모듈을 이용하여 Marker ID별로 특정 명령어를 데이터 베이스와 비교하여 비행제어 명령을 수행한다. 지상에서는 마커의 변경을 통해서 실시간으로 미션변경을 할 수 있다. 이를 통해 드론은 제어용 송수신 채널을 통해서 통신을 하고는 있으나, 주파수 채널수가 제한이 되어 있으므로 구체적인 비행 제어 명령을 마커를 통해 이착륙시 추가적이며, 자동적인 진행이 가능하다.