• 제목/요약/키워드: driving safety

검색결과 1,456건 처리시간 0.031초

주행 및 교통 시뮬레이션을 이용한 공격운전이 교통류에 미치는 영향 분석 (Analysis of Impacts of Aggressive Driving Events on Traffic Stream Using Driving and Traffic Simulations)

  • 박수빈;김윤종;오철;최새로나
    • 대한교통학회지
    • /
    • 제36권3호
    • /
    • pp.169-183
    • /
    • 2018
  • 공격운전은 주변차량 운전자를 위협하며 주행하기 때문에 교통사고 발생 개연성이 높다. 따라서 공격운전의 법제도 마련, 검지, 관리방안 등 대책이 필요하다. 본 연구의 목적은 공격운전의 주행행태가 교통류에 미치는 영향을 분석하였다. Multi-agent 주행 시뮬레이션과 교통류 시뮬레이션 VISSIM을 이용하여 공격운전의 거동을 구현하였다. 교통류 시뮬레이션과 상충분석을 이용하여 공격운전이 교통운영효율성 및 교통안전성 측면에서 교통류에 미치는 영향을 분석하였다. 분석 시나리오는 다양한 교통상황과 공격운전차량 비율을 고려하여 설정하였다. 상충분석 결과 일반적으로 공격운전 주행행태는 교통안전성을 감소시키는 것으로 나타났다. 교통운영효율성 분석결과 흥미로운 점은 서비스 수준 A, B, C 경우 공격운전차량 비율이 증가할수록 평균주행속도가 증가하였다. 이와 반대로 서비스 수준 D와 E인 경우 공격운전차량 비율이 증가할수록 평균주행속도가 감소하였다. 본 연구 결과는 공격운전을 줄이기 위한 교통안전정책 마련 시 기초자료로서 효과적으로 활용될 수 있을 것으로 기대된다.

전기 동력 이륜차의 회생제동에 따른 구동효율 향상에 관한 평가 연구 (The Test Study on Driving Efficiency Improvement of Two-wheeled Electric Vehicle according to Regenerative Braking)

  • 조수연;서동현;박준성;신외경
    • 한국자동차공학회논문집
    • /
    • 제24권6호
    • /
    • pp.635-641
    • /
    • 2016
  • Regenerative braking performance of an electrically powered vehicle is closely related to driving distance per battery charge. An electric vehicle uses appropriate amounts of mechanical braking force and electromagnetic regenerative braking force to recover energy and increase driving efficiency. In particular, when it drives on a downhill road, energy recovery rate is maximized through regenerative braking during coasting based on the mass inertia of the vehicle. Since an electric two-wheeled vehicle covered in this paper is lighter than an electric four-wheeled vehicle, the improvement of its driving distance per battery charge through regenerative braking is different from an electric four-wheeled vehicle. This study compared the driving characteristics of an electric two-wheeled vehicle based on regenerative braking. Two driving test modes were simulated with a chassis dynamometer system. By analyzing the measurement of a chassis dynamometer, the driving characteristics of a two-wheel electric vehicle, such as driving efficiency, were analyzed. In addition, test results were reviewed to draw the limitations of conventional test methods for regenerative braking performance of an electric two-wheel vehicle.

차량시뮬레이터 및 아이카메라를 이용한 도로안전성 평가기법 개발 (Development of Road Safety Estimation Method using Driving Simulator and Eye Camera)

  • 도철웅;김원근
    • 한국도로학회논문집
    • /
    • 제7권4호
    • /
    • pp.185-202
    • /
    • 2005
  • 본 연구에서는 현장 실험 조성의 제약을 극복하기 위해 3차원 가상현실(virtual reality)로 설계중인 도로를 모델링한 후, 피실험자가 Eye camera가 장착된 차량 시뮬레이터 (driving simulator)에 탑승하고 주행하면서 운전자가 행하는 선형변화에 대한 동적 반응 및 운전자의 시각행태에 대한 데이터를 획득하였다 본 실험에 적용된 차량시뮬레이터의 그래픽 모듈은 동역학 해석 모듈에 의해 얻어진 데이터를 기초로 하여 운동재현기와 가상환경의 일치감들 최대로 함으로써 피실험자로 하여금 차량시뮬레이터의 비현실성 및 부작용을 최소화하도록 하였다. 또한, Eye camera는 기존의 여타 장비와는 달리 운전자가 헬멧이나 렌즈 등 어떠한 부착장치도 착용하지 않고 실험할 수 있는 FaceLAB을 사용함으로써 운전자의 자연스러운 시각행태를 아무런 데이터 손실없이 획득하였다. 본 연구에서는 조사된 데이터를 바탕으로 도로 안전성을 평가하기 위해 차량 시뮬레이터, Eye camera방법을 통해 설계시 도로 기하구조 변화에 따라 운전자가 느끼는 안전성의 변화를 파악함으로써 도로 기하구조 조건과 안전성의 상관성을 명확하게 규명하고 이를 통해 운전자가 도로 주행시 편안하고 쾌적한 주행을 보장받을 수 있는 도로를 설계 단계에서부터 평가할 수 있는 방법을 제시하려고 한다.

  • PDF

전동차용 DRIVING GEAR UNIT의 윤활유량 선정에 관한 연구 (Study on Flow Lubrication Selection of Driving Gear Unit for EMU)

  • 김경한;이태훈;김학수;서영진;고형근
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.132-137
    • /
    • 2011
  • 철도차량의 고속화, 경량화와 함께 승객의 안전성을 보다 더 높이기 위한 많은 연구가 진행 되고 있다. 철도차량의 안전성을 높이기 위해서는 주행성능을 안정시키는 것이 무엇보다 중요하며, 드라이빙기어 내부의 윤활유량을 최적화하는 것은 주행성능 확보에 필수적이다. 본 연구에서는 전동차용 Driving Gear Unit의 회전 방향에 따라 저속 Gear 치면을 통해 Splash 되는 드라이빙기어 Casing내의 윤활유 유동 변화를 ANASYS CFD 프로그램과 전산유체해석 기법을 사용하여 구현 하였으며, 해석 내역을 토대로 유사 구동 조건에 대한 무부하 실증 시험을 실시하여 해석의 적합성 및 윤활유량 선정과 드라이빙기어의 안전성에 대해 고찰하였다.

  • PDF

극치통계분석을 이용한 교량상판 풍하중에 대한 차량주행 안전도 평가 (Driving Safety Analysis for vehicles Against High Wind on the Bridges Using Extreme Value Statistics)

  • 정지승
    • 한국안전학회지
    • /
    • 제25권3호
    • /
    • pp.112-117
    • /
    • 2010
  • This study presents a methodology to evaluate the driving safety of vehicles against localized high wind on the roads over the valleys or along the coasts. Risk level for vehicle accident is derived from the side slip caused by cross wind, and then safety criteria based on reliability for driving stability are defined. The level of safety is classified according to probability of exceeding against wind speed using the concept of extreme value statistics. To attain the safety level of vehicle on bridges, numerical simulations using Computational Fluid Dynamics(CFD) are performed. Based on this result, risk reduction and quality improvement is expected through analysis for each alternative in bridges design, construction and operation & maintenance stage with proposed process

적응형 되먹임 기반 종방향 자율주행 구동기 고장 탐지 및 허용 제어 알고리즘 개발 (Development of an Adaptive Feedback based Actuator Fault Detection and Tolerant Control Algorithms for Longitudinal Autonomous Driving)

  • 오광석;이종민;송태준;오세찬;이경수
    • 자동차안전학회지
    • /
    • 제12권4호
    • /
    • pp.13-22
    • /
    • 2020
  • This paper presents an adaptive feedback based actuator fault detection and tolerant control algorithms for longitudinal functional safety of autonomous driving. In order to ensure the functional safety of autonomous vehicles, fault detection and tolerant control algorithms are needed for sensors and actuators used for autonomous driving. In this study, adaptive feedback control algorithm to compute the longitudinal acceleration for autonomous driving has been developed based on relationship function using states. The relationship function has been designed using feedback gains and error states for adaptation rule design. The coefficients in the relationship function have been estimated using recursive least square with multiple forgetting factors. The MIT rule has been adopted to design the adaptation rule for feedback gains online. The stability analysis has been conducted based on Lyapunov direct method. The longitudinal acceleration computed by adaptive control algorithm has been compared to the actual acceleration for fault detection of actuators used for longitudinal autonomous driving.

주행 안전을 위한 자전거 기어의 프레스금형에 관한 연구 (A Study on the Mold System of Bicycles Gear for Driving Safety)

  • 정연승
    • 대한안전경영과학회지
    • /
    • 제20권4호
    • /
    • pp.1-6
    • /
    • 2018
  • Recently, bicycle has means of effective healthy transportation, and riding the bicycles is considered as popular recreational and sporting activities. Also, the saddle, steering system, driving device and braking device are researched briskly because of consumer's need for driving performance and comfort. Especially, the importance of a cassette responsible for transmission function by transmitting power to the drive shaft through the chain is very focused. The writer conducted structural analysis for the sprocket of each level using the ANSYS widely used for the analysis. Speed shifting performance was enhanced by minimization / simplification of shifting point through a sort of tooth profile of the cassette. By partitioning a clear value type and other shifting point, it has been modified to enable smooth speed-shifting. In addition, as titanium precision forming process, this study studied the molding technique by blanking and dies forging for mass production of the cassette. so it could be expected that the entire drive train would utilize that in the future. The stamping process capability for thin materials for the mass production of the sprockets is applicable to producing automobile parts, so lightweight component production is likely to be possible through that, for the safety of driving.

자율주행자동차 KNCAP(자동차안전도평가) 도입 시 평가항목과 고려사항에 관한 연구 (A Study on Assessment Items and Considerations for Development of KNCAP of Automated Driving System)

  • 우현구;이광구
    • 자동차안전학회지
    • /
    • 제13권3호
    • /
    • pp.102-110
    • /
    • 2021
  • As an alternative to solving safety, environments, and aging problems, ADS (Automated driving system) in the global automotive market is actively being developed as a new growth industry. In time for the appearance of ADS, relevant regulations and assessment programs must also be developed. For example, safety standards for the Level 3 automated driving system were promulgated in December 2019 by the Ministry of Land, Infrastructure and Transport of Korean government. However, assessment programs such as KNCAP for autonomous functions of ADS have not yet been introduced in Korea as well as globally. The autonomous driving functions of ADS at Level 3 or higher must be capable to recognize, judge and respond to objects and events in a wide variety of complex situations. In this paper, we examined and studied the complex situations, considerations and assessment items that ADS must respond to in the interest of safety for passengers, pedestrians and other road users. We hope this paper will be helpful to develop an execution program in the future.

운전행태 감시를 위한 차량 위험운전 검지장치 연구 (A Study on In-vehicle Aggressive Driving Detection Recorder System for Monitoring on Drivers' Behavior)

  • 홍승준;임양근;오주택
    • 한국자동차공학회논문집
    • /
    • 제19권3호
    • /
    • pp.16-22
    • /
    • 2011
  • This paper presents the potential of in-vehicle data recorder system for monitoring aggressive driving patterns and providing feedback to drivers on their on road behaviour. This system can detect 10 risky types of drivers' driving patterns such as aggressive lane change, sudden brakes and turns with acceleration etc. Vehicle dynamics simulation and vehicle road test have been performed in order to develop driving pattern recognition algorithms. Recorder systems are installed to 50 buses in a single company. Drivers' driving behaviour are monitored for 1 month. The drivers' risky driving data collected by the system are analyzed. Aggressive lane change in 50km/h below is a cause in overwhelming majority of risky driving pattern.

Localization Requirements for Safe Road Driving of Autonomous Vehicles

  • Ahn, Sang-Hoon;Won, Jong-Hoon
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제11권4호
    • /
    • pp.389-395
    • /
    • 2022
  • In order to ensure reliability the high-level automated driving such as Advanced Driver Assistance System (ADAS) and universal robot taxi provided by autonomous driving systems, the operation with high integrity must be generated within the defined Operation Design Domain (ODD). For this, the position and posture accuracy requirements of autonomous driving systems based on the safety driving requirements for autonomous vehicles and domestic road geometry standard are necessarily demanded. This paper presents localization requirements for safe road driving of autonomous ground vehicles based on the requirements of the positioning system installed on autonomous vehicle systems, the domestic road geometry standard and the dimensions of the vehicle to be designed. Based on this, 4 Protection Levels (PLs) such as longitudinal, lateral, vertical PLs, and attitude PL are calculated. The calculated results reveal that the PLs are more strict to urban roads than highways. The defined requirements can be used as a basis for guaranteeing the minimum reliability of the designed autonomous driving system on roads.