• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.319-327
• /
• 2016

Purpose: Automated guidance systems (AGSs) for mobile farm machinery have several advantages over manual operation in the crop production industry. Many researchers and companies have tried to develop such a system. However, it is not easy to evaluate the performance of an AGS because there is no established device used to evaluate it that complies with the ISO 12188 standard. The objective of this study was to develop a tracking sensor system using five laser distance measurement sensors. Methods: One sensor-for long-range distance measurement-was used to measure travel distance and velocity. The other four sensors-for mid-range distance measurement-were used to measure lateral deviation. Stationary, manual driving, and A-B line tests were conducted, and the results were compared with the real-time kinematic differential global positioning system (RTK-DGPS) signal used by the AGS. Results: For the stationary test, the average error of the tracking sensor system was 1.99 mm, and the average error of the RTK-DGPS was 15.19 mm. For the two types of driving tests, the data trends were similar. A comparison of the changes in lateral deviation showed that the data stability of the developed tracking system was better. Conclusions: Although the tracking system was not capable of measuring long travel distances under strong sunlight illumination because of the long-range sensor's limitations, this dilemma could be overcome using a higher-performance sensor.

• 한국ITS학회 논문지
• /
• 제23권2호
• /
• pp.173-188
• /
• 2024

자율주행차량(AV)의 기술 발전으로 실도로 내 자율주행이 가능해졌지만, 주변 요소로 AV의 인지 범위 또는 능력이 제한되는 인지 음영으로 완전한 자율주행에 어려움이 있다. 오늘날 Lv 4+ 자율주행 테스트 시나리오를 개발하기 위해서는 실제 도로에서 발생할 수 있는 다양한 인지 음영 상황을 파악하고 대비 전략을 구상하는 것이 중요하다. 따라서, 본 연구는 미국 캘리포니아 차량관리국(DMV)의 AV 사고 데이터를 통해 자율주행 모드 활성화 여부에 따라 AV와 일반차량의 사고 형태와 특성을 비교하고, AV 제어권 전환 데이터를 단계적으로 분류하여 인지 음영으로 인한 제어권 전환의 유형과 실제 사례를 도출하였다. 분석 결과, AV의 안전 운전 기동으로 일반 차량과 다른 사고 유형이 나타났으며, 3가지 유형의 인지 음영 사례를 파악하였다. 본 연구 결과는 Lv 4+ 자율주행 테스트 시나리오 개발의 중요한 기초자료가 될 것이며, 다양한 인지 음영이 고려된 테스트 시나리오를 통해 상황별 인지 음영을 해소하는 효율적인 전략을 마련할 수 있다. 이를 통해 실제 도로에서의 AV 주행 안전성을 효과적으로 평가하고 향상할 수 있을 것으로 기대된다.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.73-81
• /
• 2011

The performance of emission factor has been validated by comparison with on-road test data. Emission factor, which is a function of vehicle speed, has been acquired based on chassis dynamometer test with NIER driving pattern. Portable Emission Measurement System, PEMS has measured on-road emission. Test vehicle was operated on defined test routes under different driving conditions, and made ten trips along its route. Emission factors properly simulate on-road test result, although there is some drawback to consider variety of driving condition on real world. Vehicle specific power and acceleration have been used to explain the distributed on-road result within same vehicle speed range. The trend in carbon dioxide and nitrogen oxide emission with respect to specific power and acceleration is clear. It has been found that specific power is a good explanatory variable for microscopic analysis for modal test result. Acceleration is good for microscopic as well as macroscopic analysis.

• 한국도로학회논문집
• /
• 제14권3호
• /
• pp.141-149
• /
• 2012

본 논문은 인체에 영향을 미치는 진동에 따라 도로노면의 주행성을 정량화하고 향후 공용중인 도로 및 신설도로의 주행 안전성 평가에 적용할 수 있는 방법론을 정립하는 것이 주요 목적이다. 이를 위해 평탄성 및 인체 피로도 관련 조사를 수행하여 이론적 근거를 수립하였고 다양한 고속도로 표본 구간을 선정하여 차량 내 3축 가속도를 측정하였다. 도로 상태별로 ISO-2631에 준한 주파수별 가속도 값을 분류화함으로써 노면상태에 따른 인체에 미치는 진동 가속도 수준을 정량화할 수 있었다. 연구 결과, 전반적으로 인체에 미치는 피로도는 IRI가 높은 콘크리트 포장이 크게 유발시키는 것으로 나타났으며, SMA 포장과 다이아몬드그라인딩이 적용된 콘크리트 포장은 상대적으로 피로도가 낮은 것으로 나타났다.

• Journal of Biosystems Engineering
• /
• 제27권6호
• /
• pp.501-512
• /
• 2002

Traction performance of off-road vehicles is estimated using slip-traction relationships Two zero condition accepted by ASAE have been used widely to obtain the slip-traction relationships of off-road vehicles. This study was carried out using the soil bin systems to investigate the characteristic of slip-traction curves obtained using two zero conditions defined by ASAE. which are driving and driven zero condition, and to present disadvantage of slip-traction relationship based on two zero conditions of ASAE. The results of this study are summarized as follows : 1. For the driving zero condition, the curve of slip-traction relationship shows some issues. The first question is that the slip is zero when the traction is zero. The second question is that the value of slip is smaller than that of corresponding real slip, as the rolling radius decreased f3r the setting zero condition with driving wheel. 2. For the driven zero condition. slip occurs when the traction is zero, which is more realistic results than driving zero condition. But when a zero condition is set, skid occurs and this result increased the rolling radius of tire and increased slip value f3r the specific traction value of whole slip range. This kind of trend was getting bigger as the soil is softer, or the tire inflation pressure is higher. 3. From the results of this study, it was found that slip-traction relationship obtained by two zero conditions of ASAE is not realistic in estimating the traction performance of off-road vehicles. And also slip-traction relationship obtained for the same experimental condition showed different result in accordance with chosen zero condition,

• 드라이브 ㆍ 컨트롤
• /
• 제12권3호
• /
• pp.18-24
• /
• 2015

The plug-in hybrid electric vehicle has a high fuel economy and can be driven long distances. Its different modes include the electric vehicle, hybrid electric vehicle, and only engine operating mode. A power management strategy is important to determine which mode should be selected. The strategy makes the vehicle more efficient using appropriate power sources for driving. However, the strategy usually needs a driving speed profile which is future driving cycle. If the profile is known, the strategy easily determines which mode is driven efficiently. However, it is difficult to estimate the speed profile for a real system. To address this problem, this paper proposes a new power distribution strategy using a neural network. The average speed and driving range are used as input parameters to train the neural network system. The strategy determines a limit for the use of the battery and the desired power is distributed between the engine and the motor simultaneously. Its fuel economy can increase by improving the basic strategy.

• 한국지반공학회논문집
• /
• 제23권4호
• /
• pp.79-90
• /
• 2007

모래지반에 대하여 계측기를 부착한 강널말뚝을 진동항타하고 항타과정을 통해서 계측된 자료를 분석하여 진동항타시 강널말뚝의 진동항타거동을 살펴보았다. 특히, 강널말뚝에 대한 진동항타시 말뚝에 작용하는 응력, 이론적인 항타력과 실제 말뚝에 전달되는 힘의 차이를 반영하는 효율계수, 강널말뚝의 강체거동 여부, 지반의 동적 저항특성, 강널말뚝의 관입특성 등을 분석하였다. 강널말뚝의 진동관입시 말뚝은 거의 강체로 거동하였으며 말뚝머리부에 작용하는 응력의 최대값은 재료의 인장강도보다 상당히 작았다. 진동관입중 실제 말뚝머리부에 전달되는 최대하중은 이론식에 의해 계산된 값의 72% 정도였다. 가속도-시간이력곡선으로부터 4개의 관입깊이에 대해 유도된 변위-시간이력곡선에서의 변위진폭값은 진동기 공운전시의 진폭값의 약 16$\sim$75% 정도인 것으로 나타났다.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권3호
• /
• pp.289-294
• /
• 2023

As technologies such as cameras, Laser Imaging, Detection, and Ranging (LiDAR), and Global Navigation Satellite Systems (GNSS) become more sophisticated and common, their use in autonomous driving technologies is being explored in various fields. In the maritime area, technologies related to collision avoidance between ships are being developed to evaluate and avoid the risk of collision between ships by setting various scenarios. However, the position of each vessel used in the process of developing collision avoidance technology between vessels uses data obtained through GNSS, and may include a position error of 10 m or more depending on the situation. In this paper, a study on the dynamic safety navigation range including the positional inaccuracy of the ship is conducted. By combining the concept of the protection level obtained using GNSS raw data with a conventional safe navigation range, a safer navigation range can be calculated for dynamic navigation. The calculated range is verified using data obtained while sailing in an actual sea environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.577-579
• /
• 2002

Propose of this paper is VCM (voice coil motor) design for application of Nanoindenter, which enable control of extremely small force and displacement. This paper present the VCM shape to produce a very small force by the difference of flux density of lower part from higher one. In wide range of current. VCM produces linear driving force and operate on regular thrust having maximum displacement(100um) was practiced.