• 전력전자학회논문지
• /
• 제11권1호
• /
• pp.65-71
• /
• 2006

본 논문에서는 BLDC 전동기 센서리스 드라이브의 성능 향상을 위한 새로운 전동기 제어 기법을 제안한다. 최근 센서리스 제어방법의 주류를 이루고 있는 단자전압을 이용하는 방식들은 전동기를 동기 모드로 운전할 때 과도한 전압이 인가되면, 회전자 위치를 정확하게 검출할 수 없다. 특히 과도상태영역에서의 응답특성이 좋지 않다. 따라서 본 논문에서는 미지 입력인 역기전력을 추가적인 시스템의 상태로 모델링하고, 전체 시스템을 역기전력에 대한 미분방정식 형태 외란 모델을 도입한 확장 상태방정식으로 표현함으로서 얻어지는 상태관측기를 통하여 전동기의 속도 및 회전자 위치를 추정하는 새로운 알고리즘을 제안한다.

• 한국정밀공학회지
• /
• 제29권5호
• /
• pp.545-553
• /
• 2012

A Gimbal structure system in observation reconnaissance aircraft is made up of camera module and stabilization drive device supporting camera module. During flight for image recording, the aircraft undergoes serious accelerations with wide frequencies due to several factors. Though base excitation of stabilization drive device induces vibration of camera module, it must get the stable and clean images. To achieve this aim, acceleration of camera module must be reduced. Hence, vibration isolators were installed to stabilization drive device. Considering isolators and bearings in the stabilization drive device, vibration characteristics of gimbal structure system were analyzed by finite element method. For three translational direction, acceleration transmissibility of camera module was calculated by harmonic responses analysis in the frequency range of 5 ~ 500 Hz. In addition to, sine-sweep experiment were performed to prove correctness of present analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.122-127
• /
• 2002

A frequency-domain PES estimation and its prediction method are proposed for the tightly-coupled servo/mechanical design of high-TPI HDD system above 100 kTPI. The major two disturbance energies which are related with mechanical vibrations inside of HDD are used to predict the drive-level PES, while considering closed-loop servo dynamics. One is the torque disturbance which mainly comes from aerodynamic excitation of HSA system and the other is the displacement disturbance from disk-spindle dynamics. In order to obtain the accurate error transfer function of closed-loop servo control, the plant model is measured by accurate experiment. The measured PES is compared with predicted one in terms of frequency-domain PES spectrum and its standard variation value. It is proved that the proposed frequency-domain PES estimation/prediction method is capable of predicting drive-level PES of high-TPI hard disk drive.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1700-1707
• /
• 2011

Interior permanent magnet synchronous motor(IPMSM) adjustable speed drives offer significant advantages over induction motor drives in a wide variety of industrial applications such as high power density, high efficiency, improved dynamic performance and reliability. Since the fuzzy neural network(FNN) is recognized general approximate method to control non-linearities and uncertainties, the development of FNN control systems have also grown rapidly. The FNN controller is compounded of fuzzy and neural network. It has an advantage that is the robustness of fuzzy control and the ability to adapt of neural network. However, the FNN has static problem due to their feed-forward network structure. This paper proposes high performance speed control of IPMSM drive using the recurrent FNN(RFNN) which improved conventional FNN controller. The RFNN has excellent dynamic response characteristics because of it has internally feed-back structure. Also, this paper proposes speed estimation of IPMSM drive using ANN. The proposed method is analyzed and compared to conventional FNN controller in various operating condition such as parameter variation, steady and transient states etc.

• 한국지능시스템학회논문지
• /
• 제14권5호
• /
• pp.598-603
• /
• 2004

광디스크에 저장된 데이터를 읽기 위한 광디스크 드라이브는 광학헤드 구동기의 포커싱 서보계와 트랙킹 서보계로 구성된다. 기존에 사용하는 지상-진상-진상 보상기는 시스템의 배속이 증가하면서 광학헤드의 구동기 제어가 점점 어려워지는 추세이다. 따라서 본 논문에서는 광학헤드 구동기 서보계 구현을 위하여 유전알고리즘 기반 퍼지 PID 제어 광학헤드 구동기 설계 기법을 제안한다. 제안된 광학헤드 구동기는 두개의 퍼지 PI, PD 제어 블록으로 구성되며 두 제어기의 퍼지 규칙은 유전알고리즘을 사용하여 최적화된다. 구동기의 포커싱, 트랙킹 서보계의 플랜트 모델은 유사하므로 트랙킹 서보계의 모의 실험만을 통하여 제안된 기법의 우수성을 보인다.

• 드라이브 ㆍ 컨트롤
• /
• 제20권1호
• /
• pp.41-47
• /
• 2023

The aim of this study was to develop a method for installing strain gauges on moving, lubricating oil-filled, and sealed parts, such as drive shafts of equipment, including construction machinery. A measuring device was constructed using an embedded CPU and an IoT sensor to measure the strain of the strain gauge, which allowed for the measurement of axial torque and axial force, and subsequent analysis. To verify the performance of the developed device, the axial torque and axial force of the forklift were measured during operation using a strain gauge attached to the inside of the drive shaft. This study confirmed the possibility of measuring and analyzing the strain of a moving part, such as the inside of a drive shaft, which is sealed and filled with hydraulic oil.

• 로봇학회논문지
• /
• 제19권1호
• /
• pp.53-57
• /
• 2024

A hopping robot can move through a confined environment while overcoming obstacles. To create a small hopping robot, it must be able to generate a large amount of energy and release it at the same time. However, due to the small size of the robot, there is a limit to the size of the actuator that can be used, so it is mainly used to collect energy in an elastic element and release it at once. In this paper, we propose a small hopping robot with a simplified design by removing ancillary parts and enabling continuous hopping using only a small actuator based on a direct-drive method. In addition, repeated actuation over the rated voltage can cause thermal breakdown of the actuator. To check the safety of the actuator at high voltage, we perform modeling to predict the temperature of the actuator and verify the accuracy of the modeling through experiments.

• 제어로봇시스템학회논문지
• /
• 제5권1호
• /
• pp.39-46
• /
• 1999

Disturbances acting on the track-following servo system of an optical disk drive inherently contain significant periodic components that cause tracking errors of a periodic nature. Such disturbances can be effectively rejected by employing a repetitive controller, which must be implemented carefully in consideration of system stability. Plant uncertainty makes it difficult to design a repetitive controller that will improve tracking performance yet preserve system stability. In this paper, we examine the problem of designing a repetitive controller for an optical disk drive track-following servo system with uncertain plant coefficients. We propose a graphical design technique based on the frequency domain analysis of linear interval systems. This design method results in a repetitive controller that will maintain system stability against all admissible plant uncertainties. We show simulation and experimental results to verify the validity of the proposed design method.

• 한국인터넷방송통신학회논문지
• /
• 제9권1호
• /
• pp.47-52
• /
• 2009

전자종이를 구현하는 여러 가지 기술이 제안되어 연구되고 있으나 아직까지는 전자종이로서의 완전한 요구를 충족시키지 못하고 있다. 본 연구의 주요 목표는 종이 인쇄물과 기존의 디스플레이 매체를 대신할 수 있는 새로운 표시소자인 전자종이(e-paper)의 구동조건 및 계조 표현 방법을 개발하는 것이다. 이를 위해 상판 및 하판 분리 충전방식으로 제작된 액상분말 디스플레이 소자를 위한 구동회로 설게 및 셀단위 계조표현이 가능한다 채널 구동 장치를 개발하였으며, 연구내용을 바탕으로 액상분말 디스플레이 소자의 특성을 개선할 수 있는 방향을 제시하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.829-833
• /
• 2001

In a conventional speed sensorless stator flux­oriented (SFO) induction machine drive system, the estimated speed is delayed in transients by the use of a low pass filter. This paper investigates the problem of a conventional speed sensorless SFO system due to the delay of the estimated speed in the field weakening region. In addition, this paper proposes a method to estimate exactly speed by using Kalman filter. The proposed method is verified by simulation and experiment with a 5-hp induction motor drive.