• 오토저널
• /
• 제9권2호
• /
• pp.34-46
• /
• 1987

The drive efficiency is investigated with drawbar pull test to provide the basic data in the gradability and acceleration of the wheeled vehicle. As a result, the drive efficiencies are determined from 4*2 drive : Direct gear 0.89 1st gear 0.81 Other gears 0.83-0.87 4*4 high drive : Direct gear 0.85 1st gear 0.77 Other gears 0.79-0.83 4*4 low drive : Direct gear 0.83 1st gear 0.75 Other gears 0.77-0.81

• Journal of Advanced Marine Engineering and Technology
• /
• 제8권1호
• /
• pp.64-71
• /
• 1984

In this paper, the fundemental equation on the Trans-vector control of 3.phi. Induction motor drive and the new equivalent circuit to be adapted for this equation, have been obtained, and control drives system to be coincide with this equation is made. Therefore, it has been obtained that control scheme can always be used motor drive. 3.phi. Induction motor drive has been got the dynamic behavior the same as that of DC motor drive. The drive dynamic response is very rapid because of Trans-vector control on the I_1$ (primary current) and .${\omega}_1$ (frequency of primary current) of the Induation mechine. This paper indicates that a practicality of the drive control system and the rationalty of the theory have been identified with the experimental results. The effect of parameter variations on the drive dynamic response can be evaluated from these results.

• 대한가정학회지
• /
• 제40권1호
• /
• pp.23-35
• /
• 2002

The purpose of this study was to examine the personal, familial, school and peer characteristics related to adolescents' runaway drive. The 259 subjects were selected from high school student in the city of Daegu. The major findings of study were as follows: 1. In respect of personal characteristics, the more runaway drive was, the lower self-esteem was and the higher anxiety, depression, and impulsive mind was. 2. In respect of familial characteristics, the more runway drive was, the lower family cohesion and family adaptation was and the higher the degree of parents' rejection was. And the higher runway drive was, the higher degree of child abuse and interparental conflict. 3. In respect of school characteristics, the more runway drive was, the lower school adaptation was. 4. In respect of peer characteristics, the more runway drive was, the higher degree of delinquency of peer.

• Structural Engineering and Mechanics
• /
• 제26권6호
• /
• pp.635-650
• /
• 2007

In this paper, the equivalent exciting force caused by electric excitation is derived. By dividing load and displacement vectors into mean values and time-varying ones, the dynamic equations of the system are transformed into linear ones for time-varying portion of the displacements. The analytical equations of the forced time responses of the drive system to electric excitations are obtained. Using the Laplace transformation, the transfer function of the drive system is obtained. These equations are used to analyze the time and frequency responses of the drive system to the electric excitation. It is known that electric excitation can cause forced responses of the drive system, the total dynamic responses are decided by three phase exciting voltages, exciting frequency and natural frequencies of the drive system, and the drive parameters have obvious influence on the time and frequency responses.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권3호
• /
• pp.112-118
• /
• 2001

In the near future, the voltage of power system for passenger vehicle will be changed to 42V from existing 14V./ Because of increasing power and voltage ratings used in the vehicle the motor drive system has high switching dv/dt and it generates electromagnetic interference (EMI) To solve these problems multi-level inverter system may be used The feature of multi-level inverter is the output voltage to be synthesized from several levels of voltage Because of this feature high switching dv/dt and EMI can be reduced in the multi-level inverter system But as the number of level is increased manufacturing cost is getting expensive and system size is getting large. Because of these disadvantages the application of multi-level inverter has been restricted only to high power drives. The method to reduce manufacturing cost and system size is to integrate circuit of multi-level inverter into a few chips But isolated power supply and signal isolation circuit using transformer or opto-coupler for drive circuit are obstacles to implement the integrated circuit (IC) In this paper a drive circuit of 4-level inverter suitable for integration to hybrid or one chip is proposed In the proposed drive circuit DC link voltage is used directly as the power source of each gate drive circuit NPN transistors and PNP transistors are used to isolate to transfer the control signals. So the proposed drive circuit needs no transformers and opto-couplers for electrical isolation of drive circuit and is constructed only using components to be implemented on a silicon wafer With th e proposed drive circuit 4- level inverter system will be possible to be implemented through integrated circuit technology Using the proposed drive circuit 4- level inverter system is constructed and the validity and characteristics of the proposed drive circuit are proved through the experiments.

• 한국운동역학회지
• /
• 제28권3호
• /
• pp.181-185
• /
• 2018

Objective: The purpose of this study was to investigate the effect of types of drive-in initial steps in basketball on technical factors, to provide basic information for the enhancement of basketball skill. Method: Ten men (age: $24.70{\pm}2.26years$; height: $181.00{\pm}5.72cm$; weight: $75.70{\pm}8.23kg$; career length: $10.00{\pm}3.59years$), each with a career length of over five years and no history of injury to the lower extremities within the prior six months, participated in this study. They were asked to perform four types of drive-in movements at $35{\sim}60^{\circ}$, wearing their own shoes, after running from a start line 5 m away and catching a basketball passed by an expert passer. The drive-in movements were measured by eight infrared cameras (Oqus 300, Qualisys, Sweden). Collected raw data were used to calculate total initial step time, displacement, velocity, center of mass (COM) height, and COM velocity. Results: Total initial step displacement and velocity of cross drive-ins (JC, SC) were greater than that of direct drive-ins (JD, SD; p < .05). COM velocity of cross drive-ins (JC, SC) was also greater than that of direct drive-ins (JD, SD; p < .05). Conclusion: Our results indicated that cross drive-ins, regardless of stop step type, are more effective than direct drive-ins. This is because cross drive-ins are technically bold due to less influence from walking violations and double dribble rules in basketball. However, using one-sided movement is too difficult to play in competitive game; therefore, basketball players should develop the ability to choose appropriate movement frequency.

• 한국정보통신학회논문지
• /
• 제9권3호
• /
• pp.498-503
• /
• 2005

Turbine Load Set Motor장치는 노후화 된 화력 발전소에서 출력 부하를 결정하는 중요한 장치로서, Motor를 가변하면서 발전 출력 부하를 조정하게 된다. 이러한 종래 발전시스템에서는 Set Up Range를 운영자가 수동으로 조작한 Set Up값에 따라 Motor를 회전시키게 되며, Motor를 포함한 내부적 동작에 의해서 발전 출력 부하 결정이 이루어지게 된다. 따라서 본 논문에서는 수동적으로 출력부하를 작동되는 Turbine Motor Drive Unit를 대처할 수 있는 Digital Drive Unit 장치를 개발하여 기존 Turbine Load Set Motor 성능을 지닐 수 있는 장비를 구현한다. 또한 구현한 Digital Drive Unit을 바탕으로 발전 출력 부하를 결정하는 기본 기능을 기존 Motor Drive Unit과 연결하여 작동될 수 있도록 제어 알고리즘 구현과 구현된 제어 시스템을 통해 기존 Turbine Load Set Motor Drive와 연결 가능성을 확인한다.

• 한국의류산업학회지
• /
• 제20권6호
• /
• pp.656-668
• /
• 2018

The main object of this study was to understand the body image and body management behavior associated with desiring a thinner and more muscular body. The present study examined whether the drives for thinness and muscularity occur concurrently for both male and female college students, and whether there are gender differences. Moreover, the effects of objectified body consciousness on drive for thinness and drive for muscularity were investigated. A self-administered survey was conducted and a total of 390 data were used for data analysis. Participants included 197 male college students and 193 female students. Results indicated that male students reported significantly lower drive for thinness and higher drive for muscularity than female students. However, the drives for thinness and muscularity were significantly correlated for both male and female college students, and they reported discrepancies between their BMI and self-perceived weight and muscle mass. Findings supported the significant effects of objected body consciousness on the drives for thinness and muscularity for both male and females. Sub-dimensions of objectified body consciousness had differential effects on drive for thinness and muscularity. Specifically, body surveillance and body shame significantly influenced male and female students' drive for thinness, while their control belief did not have significant effects on their drive for thinness. Additionally, body shame emerged as significant unique predictor of drive for muscularity. In terms of gender comparisons, while the effect of body shame was the strongest for the males, the effect of surveillance was as strong as that of body shame for the females.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.240-242
• /
• 2021

최근 대부분의 매장에서 직원과 고객이 직접 대면하여 주문 하는 시스템이 사라지고 무선 주문 시스템인 키오스크가 도입되고 있다. 하지만 매장에서 서비스하고 있는 Drive-Thru는 아직까지 직원과 고객이 직접 소통을 하여 주문 하는 시스템을 가지고 있다. 본 논문에서는 Drive-Thru의 직원과 고객이 직접 소통하는 부분을 QR-Code를 이용하여 고객이 직원과 대면하지 않고 주문을 하는 Drive-Thru 시스템의 설계를 제안한다. 비대면 Drive-Thru 시스템은 매장 내의 직원을 최소화하여 더욱 자동화 된 시스템 제공을 목적으로 한다. 이에 따라 고객들은 더욱 정확한 서비스를 제공 받으며 소비의 질을 높일 수 있는 효과를 지닌다.

• 한국전기전자재료학회논문지
• /
• 제22권7호
• /
• pp.563-566
• /
• 2009

This paper presents a motor drive IC for automotive applications. The drive IC is dedicated to control and drive external MOSFETs which directly drive 3-phase motor with a high current. In case of driving high-side power switches, the bootstrap topology is widely used. however, it requires three bootstrap diode and three capacitor respectively. And it needs a minimum charging time to maintain high-side voltage. The motor drive IC uses a charge-pump circuit for all three high-side voltage with various protection schemes for automotive applications.