• 한국컴퓨터정보학회지
• /
• 제8권2호
• /
• pp.33-42
• /
• 2001

본 논문에서는 웹과 XML을 이용하여 학습자가 원하는 문항만을 검색하고 평가할 수 있는 문제은행 시스템을 구현하였다. 문항의 구성은 4지선다형, 5지선다형, 단답형으로 구성하였고 난이도 및 출제빈도를 고려하여 변별력을 가지도록 문제은행화 하였다. 문항검색은 데이터베이스에 저장된 정보를 단순히 검색하는 것이 아니라 저장된 정보를 XML문서로 변환한 후 XML 데이터에 대하여 Xpath를 이용하여 검색하였다 검색된 결과는 XSL을 이용하여 브라우저상에 나타나도록 하였다. 문항평가는 학습자가 원하는 과목. 단원에 대해서 난이도 및 출제빈도 그리고 문항유형별로 문항수를 입력하여 평가 문항을 생성하였다. 또한 실시간으로 학습자에게 학습결과를 제공하였고 학습자가 오답으로 응답한 문항에 대해서는 반복학습을 할 수 있도록 하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.227-238
• /
• 1993

IRRI Engineering Division has developed a well drilling rig attachment that matched power tiller or hand tractor. It was designed in response to the growing demand for ground water utilization for small-scale irrigation, especially in drought-sticken and rained farms in Asian countries. The power tiller-driven rig can drill 30 meters of 100mm well in an unconsolidated formation in one day and can be rapidly converted from rotary to jetting or to the percussion method of drilling to suit different soil and rock formation. In addition, the power tiller can be quickly installed or removed from the rig frame and can be used for transporting the rig to other sites. The rig can be dismantled into smaller sub-assemblies for carrying by hand into less accessible areas. One manufacturer in Central luzon Philippines has started to produce the rig for well drillers in Central Luzon. The Department of Agriculture in the Philippines have procured thirty three(33) units of these machines f r their Shallow Tubewell program.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1205-1210
• /
• 2005

The behavior of rock mass and solute(e.g. groundwater, radioactivity) flow in fractured rock can be directly influenced by joint roughness. The characteristics of joint roughness is also a main factor for the rock classification(e.g. RMR, Q system) which is usually used in tunnel design. Nevertheless, most of JRC estimation has been carried out only by the examination with the naked eye. This JRC estimation has a lack of objectivity because each investigator judges JRC by his subjective opinion. Therefore, it will be desirable that the assessment of JRC is performed by a numerical analysis which can give a quantitative value corresponding to the characteristics of a roughness curve. Meanwhile, roughness curves for joint surfaces which are observed in drill cores have been obtained only along linear profiles. Although roughness curves are measured in the same joint surface, they can frequently show diverse aspects in a standpoint of roughness characteristics. If roughness curves can be measured along the elliptical circumferences of joint surfaces from core scanning images or Televiewer images, they will certainly be more comprehensive than those measured along linear profiles for roughness characteristics of joint surfaces. This study is focus on dealing with (1) extracting automatically roughness curves from core scan image or Televiewer image, (2) improving the accuracy of quantitative assessment of JRC using fractal dimension concept.

• Child Health Nursing Research
• /
• 제22권2호
• /
• pp.117-125
• /
• 2016

Purpose: This study was done to examine the effect of direct practice of newborn health assessment on nursing student's clinical competence and self-efficacy and to propose effective strategies for clinical education on newborn care. Methods: Design was a nonequivalent control group quasi-experimental study. The direct practice program was composed of a lecture, demonstration, drill and feedback using a manikin, and repeated direct practice regarding newborn health assessment. Participants were 65 student nurses taking the pediatric nursing practicum in the nursery room at M hospital. The experimental group (n=33) participated in the direct practice program for newborn health assessment and the control group (n=32) received the traditional practice method. Nursing clinical competence was assessed by two nurse investigators and structured questionnaires were used to measure self-efficacy. Results: The experimental group's clinical competence was significantly higher than that of the control group (t=-4.82, p=.000). However no significant difference was found between the two groups for self-efficacy (t=1.264, p=.211). Conclusion: These findings indicate that the direct practice program is effective in improving nursing student's clinical competence, but it was not effective in increasing self-efficacy. Direct practice in various clinical education settings is recommended and longitudinal effects be evaluated.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.160-166
• /
• 2015

Ultrasonic machining (USM) has been considered a new, cutting-edge technology that presents no heating or electrochemical effects, with low surface damage and small residual stresses on brittle workpieces. However, nowadays, many researchers are paying careful attention to the disadvantages of USM, such as low productivity and tool wear. On the other hand, in this study, a high-performance rotary ultrasonic drilling (RUD) spindle is designed and assembled. In this system, the core technology is the design of an ultrasonic vibration horn for the spindle using finite element analysis (FEA). The maximum spindle speed of RUM is 9,600 rpm, and the highest harmonic displacement is $5.4{\mu}m$ noted at the frequency of 40 kHz. Through various drilling experiments on glass workpieces using a CVD diamond-coated drill, the cutting force and cracking of the hole entrance and exit side in the glass have been greatly reduced by this system.

• Geomechanics and Engineering
• /
• 제19권1호
• /
• pp.93-104
• /
• 2019

Anomalies and/or fractured grounds not detected by the surface geophysical and geological survey performed during design stage may cause significant problems during tunnel excavation. Many studies on prediction methods of the ground condition ahead of the tunnel face have been conducted and applied in tunneling construction sites, such as tunnel seismic profiling and probe drilling. However, most such applications have focused on the drill and blast tunneling method. Few studies have been conducted for mechanized tunneling because of the limitation in the available space to perform prediction tests. This study aims to predict the ground condition ahead of the tunnel face in TBM tunneling by using an electrical resistivity tomography survey. It compared the characteristics of each electrode array and performed an investigation on in-situ tunnel boring machine TBM construction site environments. Numerical simulations for each electrode array were performed, to determine the proper electrode array to predict anomalies ahead of the tunnel face. The results showed that the modified dipole-dipole array is, compared to other arrays, the best for predicting the location and condition of an anomaly. As the borehole becomes longer, the measured data increase accordingly. Therefore, longer boreholes allow a more accurate prediction of the location and status of anomalies and complex grounds.

• 한국지반신소재학회논문집
• /
• 제18권4호
• /
• pp.115-127
• /
• 2019

본 연구의 대상 공법인 저유동성 그라우팅 주입공법은 모르타르를 주입재로 하여 비배출 치환원리에 의해 지중에 압입하는 공법으로서 지반의 밀도 증대효과를 기대할 수 있고 저소음, 저공해, 내구성 확보와 함께 경우에 따라서는 높은 주입 고결체의 강도를 이용한 기초파일로 사용할 수도 있다. 저유동성 주입공법으로 지반의 동적 특성이 향상됨을 확인하기 위하여 현장에서 시험시공을 실시하고 물리시험을 수행하였으며 코어에 대한 실내시험을 통해 지중에 형성된 개량체 품질을 확인하고 코어회수율 분석을 수행하였다. 밀도검층은 감마선의 컴프턴 산란을 이용하여 지층의 체적 밀도를 산정하였고, 음파검층은 시추공 내에서 음파발생 및 수신장치로 구성된 검층기를 이용하여 시추공 주변의 지반에 대해서 시험을 실시하였다. 그라우팅 전,후 물성변화(밀도검층, 음파검층)를 측정한 결과, 기본적으로 두 물성 모두 그라우트제 주입 후 물성이 증가하여 측정되었다. 다만, 그라우팅 후 속도 증가보다 밀도 증가의 변화 폭이 컸으며, 지반 밀도 측정 방법이 주입재의 충진 효과를 측정하는데 효과적이다. 재령 28일 후 채취한 시료로부터 강도 및 코어회수율을 측정하였으며, 시험결과 개량체의 확산 및 강도시험 결과가 설계기준을 만족시켜 내진성능보강을 만족한 것으로 확인하였다.

• 정보처리학회논문지A
• /
• 제12A권5호
• /
• pp.461-470
• /
• 2005

학습자 스스로 학습내용, 학습방법, 학습순서 등을 결정하고 재구조화할 수 있는 학습자 통제 환경에서는 학습자의 특성을 고려한 개별화 학습이 가능하다. 본 연구에서는 웹 기반 교수 학습 과정에서 중요시되고 있는 학습자 특성 변인 중에서 학습자의 학습경로 패턴을 Apriori 알고리즘을 이용하여 분석하고, 유사한 학습경로 패턴을 갖는 학습자들로 그룹화하였다. 이를 기반으로 학습자 개인에게 학습경로, 학습내용. 학습매체, 보조학습콘텐츠, 자료제시유형 등을 다차원적으로 제공하기 위한 다차원 학습경로 패턴 분석 시스템을 설계하고 구현하였다. 개발된 시스템에 대하여 만족도 검사를 실시한 결과 보조학습콘텐츠에 대한 만족도가 "매우 만족" $24.5\%$, "만족" $35.17\%$로 가장 높게 나타났다. 학습자 수준별로는 하위수준의 학습자에 대한 만족도가 "매우 만족" $20.2\%$, "만족" $31.2\%$로 상위수준의 학습자 "매우 만족" $18.4\%$, "만족" $28.54\%$ 보다 높게 나타났다. 개발된 시스템은 드릴-업, 드릴-다운 등의 OLAP 기술을 이용하여 학습자들에게 다양한 각도로 다차원적으로 의미 있는 정보를 제공할 것으로 기대된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권3호
• /
• pp.155-170
• /
• 2010

Availability of economic and efficient energy resources is crucial to a nation's development. Because of their low cost and advancement in drilling and exploration technologies, oil and gas based energy systems are the most widely used energy source throughout the world. The inexpensive oil and gas based energy systems are used for everything, i.e., from transportation of goods and people to the harvesting of crops for food. As the energy demand continues to rise, there is strong need for inexpensive energy solutions. An offshore platform is a large structure that is used to house workers and machinery needed to drill wells in the ocean bed, extract oil and/or natural gas, process the produced fluids, and ship or pipe them to shore. Depending on the circumstances, the offshore platform can be fixed (to the ocean floor) or can consist of an artificial island or can float. Semi-submersibles are used for various purposes in offshore and marine engineering, e.g. crane vessels, drilling vessels, tourist vessels, production platforms and accommodation facilities, etc. The challenges of deepwater drilling have further motivated the researchers to design optimum choices for semi-submersibles for a chosen operating depth. In our series of eight papers, we discuss the design and production aspects of all the types of offshore platforms. In the present part I, we present an introduction and critical analysis of semi-submersibles.

• 화약ㆍ발파
• /
• 제23권4호
• /
• pp.1-18
• /
• 2005

고준위폐기물 처분시스템의 거동 실증을 위해 한국원자력연구소내에 추진되고 있는 지하처분연구시설은 고성능 폭약을 이용한 발파 기법에 의해 지하 화강암반내에 건설된다. $6m{\times}6m$ 크기의 터널을 굴착하기 위한 발파에 의한 진동 및 소음이 인접한 연구시설 및 하나로 원자로에 영향을 예측하기 위한 시험 발파가 실시되었다. 시험발파를 통해 얻어진 발파진동식을 이용한 원자력연구소내 주요시설에 대한 발파영향을 평가결과 설계기준에 비해 훨씬 낮은 것으로 파악되었다. 굴착 진행에 따른 소음, 진동값을 측정하였으며 진동값의 경우 발파진동식으로 추정한 값보다 더 낮게 나타났다. 따라서 원자력연구소내 지하에 280m 규모의 처분연구시설을 건설하기 위한 발파작업으로 연구소내 주요 시설에 미칠 영향은 미미할 것으로 판단된다.