• 제목/요약/키워드: dredged slurry

검색결과 28건 처리시간 0.025초

계절별 수온에 따른 점토의 침강압밀 특성 연구 (The effect of seasonal water temperature on sedimentation characteristics of dredged clay)

  • 옥영석;안용훈;이철호;최항석
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.1183-1189
    • /
    • 2009
  • The sedimentation rate of particles in a suspension is a function of particle size, initial slurry water content and salinity. Many researches conducted on the behavior of dredged soils have centered on such factors. However, there have been few attempts to assess another important influence factor of seasonal water temperature on designing the placement of dredged materials. In this paper, the effect of seasonal water temperature on sedimentation characteristics of dredged clay was investigated with consideration of three different water temperatures, that are $5^{\circ}C$, $15^{\circ}C$, $35^{\circ}C$, which represent critical water temperatures in winter, spring or fall, and summer, respectively. A series of experimental results reveal that the sedimentation rates for the water temperature of $15^{\circ}C$ and $35^{\circ}C$ are very similar each other, but that of $5^{\circ}C$ that represents a winter season leads to a considerably delayed sedimentation compared to the others. This may be attributable to the retardation of ion-leaching from clay particles at low water temperature.

  • PDF

경량기포혼합토로 뒷채움된 연성매설관의 거동특성 (Behavior Characteristics of Underground Flexible Pipe Backfilled with Lightweight Foamed Soil)

  • 이용재;여규권;박상원;김홍연
    • 한국지반신소재학회논문집
    • /
    • 제14권1호
    • /
    • pp.43-50
    • /
    • 2015
  • 본 연구에서는 현장잔토를 활용할 수 있고 다짐이 불필요하여 관로공사에 유용한 경량기포혼합토를 지중매설관의 뒷채움재로 이용할 경우 관로의 거동을 조사하기 위하여 시험시공을 실시하고 계측결과를 분석하였다. 동시에 동일한 조건의 새만금 준설토사 뒷채움 시공결과와 비교하였다. 연직토압의 경우 경량기포혼합토 뒷채움 시 준설토사 대비 초기 슬러리 상태에서 25.6% 가량 저감되었고 양생 후에는 준설토사 토압의 10% 이내에 불과하였다. 준설토사 뒷채움 시에는 경량기포혼합토 대비 수평토압의 경우 3.6배 이상, 연직 및 수평변위는 각각 3.2배와 2.6배 가량의 차이를 나타내어 경량기포혼합토의 토압 및 변위저감 효과가 우수한 것으로 나타났다. 매설관 상반부에서 측정된 응력의 경우 토사 뒷채움 시 대체로 압축응력이 발생한 반면, 경량기포혼합토를 타설한 경우 초기 슬러리 상태에서 발생한 부력으로 인하여 고정된 양단부를 지점으로 부(-)의 모멘트가 발생함으로써 상반부에 인장응력이 발생하는 결과를 얻었다. 결론적으로, 새만금에서 준설된 토사를 이용한 경량기포혼합토는 인근 개발지에서 매설관 뒷채움재로 활용하는데 있어 준설토사와 비교하여 매우 우수한 재료이나 타설 시 부력에 대한 대책이 필요하다.

슬러리점토의 압밀특성 (Consolidation Characteristics of Slurry Clay)

  • 정규향;정종진;김교준;윤석군
    • 한국해안해양공학회지
    • /
    • 제17권1호
    • /
    • pp.9-15
    • /
    • 2005
  • 매립재로 이용되는 준설점토는 일반적으로 함수비가 매우 크며, 작은 압밀하중이 작용하더라도 큰 침하가 일어나는 특성을 지닌다. 이러한 초연약지반을 개량하는 공법설계를 위해서는 압밀특성을 구하는 실험이 실시되어야 한다. 그러나 일반적인 표준압밀시험방법으로는 슬러리상태의 흙이 압밀링의 벽면을 타고 상하부로 흘러나오기 때문에 실험이 불가능하다. 따라서, 본 연구에서는 Rowe cell 시험기를 사용하여 준설점토에 대한 압밀시험을 실시하였으며, 함수비의 변화가 압밀특성에 주는 영향을 검토하기 위해서 함수비를 100%, 110%, 120%, 133%, 150% 등 5종류로 변화시켜서 실험을 실시하였다. 실험결과로부터 준설매립지반의 개량을 위한 설계를 하는 경우, 실제 압밀시험을 하지 않고도, 현장 함수비가 측정되면 개략적인 압축지수와 압밀계수 및 변형률을 예측할 수 있는 식을 제안하였다.

폴리머 디스퍼션을 이용한 강재의 내식성 평가에 관한 연구 (A Study on the Evaluation of Corrosion Resistance of Coated Steel Using Polymer Dispersion)

  • 조영국
    • 한국건축시공학회지
    • /
    • 제3권4호
    • /
    • pp.103-109
    • /
    • 2003
  • Reinforced concrete structures under sever conditions such as marine structures, bridges and structural constructed with aggregated(dredged front sea). can be deteriorated from corrosion of the reinforcing bars. The purpose of this study is to evaluate the corrosion reflectance of coated steel using polymer dispersion and polymer cement slurry. Polymer dispersion and polymer cement slurry with various polymer types were coated to the surface of bars and steel plate, and tested for accelerated corrosion tests. Tests include adhesion in tension, bending test, chloride ion spray, penetration of NaCl 10% solution and carbonation. From the test results, the corrosive resistance of steel is considerably improved by using polymer dispersion and polymer cement flurry at surface of steel. The difference of the corrosive resistance is hardly recognized according to types of polymer dispersion. The coated steel using polymer dispersion and polymer foment slurry will be improved to a great extent compared to those of plain steel when increasing content of chloride ion in cement concrete.

준설토 주입방법에 의한 비닐튜브체의 퇴적 및 변형 특성 - 크레이터 방지 기술을 중심으로 - (A Study on the Sedimentation of Dredged Soils and Shape Changes of a Transparent Vinyl Tube by Filling Tests - Anti-Crater Formation -)

  • 김형주;성현종;이광형;이장백
    • 한국지반신소재학회논문집
    • /
    • 제13권2호
    • /
    • pp.1-10
    • /
    • 2014
  • 본 연구에서는 준설토 주입 후 튜브 내부 준설토의 퇴적분포가 튜브 형상에 미치는 영향을 분석하기 위해 준설토 주입실험 결과를 바탕으로 튜브 내 준설토의 퇴적분포와 튜브 거동에 대해 소개하였다. 튜브 내 준설토의 퇴적분포를 관찰하기 위해 투명 비닐소재를 사용하여 튜브를 제작하였고, 이때 튜브의 직경(D)은 0.5m와 0.7m이고 길이(L)는 모두 4.0m이다. 주입형태에 따른 튜브 내 준설토의 퇴적분포 형태를 관찰하기 위해 준설토 주입형태는 I-Type과 T-Type을 적용하였다. 실험은 주입, 침강 및 퇴적 후에 준설토 상부의 물을 배수과정에서 제거하고 슬러리 상태의 시료를 재주입하는 과정을 반복하여 수행하였고, 주입 및 배수 단계에서 튜브 내 준설토의 퇴적분포와 튜브의 연직 및 수평 거동을 관찰하였다. 주입실험 결과 I-Type 주입의 경우 크레이터 형성에 의한 부유 및 확산퇴적이 동시에 발생되는 분리퇴적에 의해 비균질 거동을 나타내고, T-Type 주입은 확산수평퇴적으로 인하여 퇴적 튜브 내 준설토가 균등하게 분포하는 것으로 나타났으며, 비배수 초기 연직충진비($H/D_0$)는 0.54~0.64 정도이고 수평변형비($W/D_0$)는 1.45~1.54로 퇴적고는 준설토 충진에 비례하여 증가하나 수평변형비는 일정하거나 감소하면서 튜브체의 중심은 상향이동 되고 있다.

초연약 점토의 구성관계 산정에 관한 실험적 연구 (A Experimental study for obtaining material function of very soft clay)

  • 이송;강명찬
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.491-498
    • /
    • 2002
  • Dredged and reclaimed soft clays form slurry state which is very high water content and very low shear strength, experience large self-weight consolidation, nonlinear compressibility and permeability phenomenon would take place. In this case, a material functions which represent variety effective stress-void ratio-permeability relation (especially very low effective stress), are should be determined to predict nonlinear finite strain consolidation phenomenon forehand In this study, large slurry consolidometer with a 380mm diameter and a 1400mm height which is able to consolidation and permeability test, was developed to determine material function of very soft clay with a 500% initial water content clay, self-weight consolidation and low stress level consolidation (1Kpa, 3Kpa, 6Kpa, 12Kpa) was conducted and after each consolidation step permeability test also conducted. after final consolidation step, a constant rate of strain consolidation was conducted with undisturbed sample obtained from the large consolidometer. On the above result, material function was determined and laboratory test was modelled to evaluate its validity, numerical analysis on th field was compared to other method.

  • PDF

점토슬러리의 침강 및 압밀 거동에 관한 연구 (Settling and Consolidation Behaviour of Cohesive Soil Slurry)

  • 이명호;김대호;김수삼
    • 대한토목학회논문집
    • /
    • 제28권3C호
    • /
    • pp.143-148
    • /
    • 2008
  • 점토질 입자를 다량으로 포함하는 준설토의 매립 시 발생하는 침강 및 압밀 거동에 대하여 조사하고자 일련의 실내실험을 수행하였다. 카올린 점토를 사용하여 초기함수비, 전해질의 종류 및 농도 등 다양한 조건에서 침강실험을 실시하였으며, 침강을 촉진하고 압밀에 의한 체적감소를 극대화하기 위하여 동전기프로세스를 채택하여 자연 상태의 침강 및 압밀 거동과 비교 분석하였다. 실험 결과 전해질 용액에 존재하는 다양한 양이온의 영향으로 침강속도가 증가하였으며, 자연 상태의 침강거동에 비해 동전기적 침강의 경우 더 많은 침하량을 유발시켰으며 함수비의 감소를 확인하였다.

폴리머 시멘트 슬러리로 코팅한 도장철근의 내식성 평가 (Evaluations of Corrosion Resistance of Coated Steel Using Polymer Cement Slurry)

  • 조영국;김영집;소양섭
    • 콘크리트학회논문집
    • /
    • 제15권1호
    • /
    • pp.117-124
    • /
    • 2003
  • 최근 강모래의 고갈로 인하여 해사의 사용이 증대되고 있는 실정에 있다. 그러나 해사는 철저하게 제염처리 하여 사용하지 않으면 철근 콘크리트 구조물의 철근에 막대한 영향을 미칠 수 있다. 본 연구에서는 제염처리하지 않은 해사를 시멘트 콘크리트에 직접 사용하여도 철근의 부식을 억제할 수 있는 방청재료를 개발하기 위한 연구의 일환으로서, 기존의 에폭시 철근과 비교하여 경제적이고 방식 성능면에서 우수한 재료로서 폴리머 시멘트 슬러리를 이용하고자 하였다. 각종 폴리머를 사용하고 여러 가지 부식촉진 실험을 통하여 도장하지 않은 철근과 도장한 철근과의 성능을 비교평가하였다. 연구결과, 폴리머 시멘트 슬러리로 도장한 철근은 도장하지 않은 철근에 비해 염화나트륨 수용액에 대한 침지 및 분무시험과 시멘트 콘크리트 속에서의 부식에 관한 실험에 있어서도 매우 우수한 방식성능을 발휘하였다. 다양한 부식촉진 실험결과, 철근의 부식은 염분, 중성화 및 촉진양생에 의해 크게 영향을 받으며, 복합적인 인자가 작용될 때, 더욱더 심한 부식이 발생하였다. 이러한 부식을 폴리머 시멘트 슬러리에 의한 도장으로 억제할 수 있는데, 폴리머 시멘트 슬러리의 매트릭스에 존재하는 폴리머 필림의 연속된 막에 의해 염화물 이온의 침투가 차단되었기 때문이며, 폴리머 시멘트 슬러리의 완벽한 방식효과는 도장두께로 조절할 수 있을 것이다.

토사 주입과 배수 시 원형 아크릴 튜브 구조체의 압력 변화에 대한 실험적 연구 (Experimental Study on Pressures Changes on Infilling Soil and Geotextile Drain in Circular Acrylic Tube Structure)

  • 김형주;원명수;이장백;박태웅
    • 복합신소재구조학회 논문집
    • /
    • 제6권3호
    • /
    • pp.86-94
    • /
    • 2015
  • A series of injection and drainage test were conducted on an circular acrylic tube to investigate the pressure generated by the accumulated fill materials inside a circular acrylic tube structure. The acrylic tube was filled by means of gravity filling with a slurry material having an average water content of 700%. The water head during the filling process was 1.8m and the bottom pressure during initial filling was 20.18kPa. The recorded stress at the sides of the acrylic tube was 17.89kPa during the filling process and was reduced to 13.58kPa during the leaving process. Continuous drainage of the acrylic tube has greatly influenced the stresses around the tube structure. As the water is gradually allowed to overflow, the generated pressure at the topmost pressure sensor of the tube was reduced further to 2.17kPa. Eventually, the initially liquid state slurry material transforms into plastic state after water has dissipated and substantial soil particles are deposited in the acrylic tube. The final water content of the deposited silt inside the acrylic tube after the test was 42%. It was found that the state of stresses(geo-static earth pressures) in the acrylic tube was anisotropic rather than isotropic.

실트질 점토 채움 시 지오텍스타일 튜브의 거동 및 시공 방법에 관한 연구 (Installation Technology and Behavior of Silty Clay Filled Geotextile Tube)

  • 신은철;오영인
    • 한국지반신소재학회논문집
    • /
    • 제1권1호
    • /
    • pp.13-21
    • /
    • 2002
  • 지오텍스타일 튜브를 활용한 해안 및 항만구조물은 해안침식방지 및 토사퇴적을 유도하는 구조물로 준설토를 수리학적 또는 기계적으로 채움을 실시하여 이안제(Detached brekwater), 돌제(Groin), 도류제(Jetty)등의 구조물을 축조한다. 일반적으로, 모래질 토사를 채움토사로 적용할 경우는 채움토사의 침강과 토목섬유의 배수특성을 효율적으로 만족하여 주입구의 간격이 가까우나, 점토질 토사 또는 오염된 슬러지를 채울 경우, 채움토사의 침강속도가 길며 토목섬유의 구멍막힘 현상으로 인하여 주입구의 간격을 넓게 하여 적용한다. 본 논문에서는 송도신도시 공유수면 매립공사 현장에서 점토질 토사를 채움토사로 적용한 지오텍스타일 튜브에 대하여 실대형 현장시험을 실시하였다. 지오텍스타일 튜브의 채움작업은 준설선을 이용한 수리학적 채움을 실시하였으며, 현장계측은 채움단계 및 시간에 따른 유효높이 변화, 내부 채움토사의 위치에 따른 단위중량 변화, 비배수 전단강도 등을 측정하였다. 본 실대형 현장시험에 따른 계측결과, 점토질 토사의 채움 시 침강 및 배수를 위한 단계별 채움 작업이 필요하며, 배수에 따른 최종 유효높이는 채움 작업 시 최고높이의 50%까지 감소하였다.

  • PDF