• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.338-344
• /
• 2016

The study is actively being performed to increase fuel injection pressure of common rail system among countermeasures to meet the emission regulation strengthen of the Diesel engine. The common rail fuel injection tube in such ultra high pressure common rail system has the weakest structural characteristics against vibration that is generated by fuel injection pressure and pulsation during engine operation and driving. Thus the extreme durability is required for common rail fuel injection tube, and the drawing process is being magnified as the most important technical fact for strength of seamless pipe that is the raw material of common rail tube. In this respect, we analyzed the characteristic of dimension and stress variation of the ultra high pressure common rail fuel injection tube by variation of Die and Plug angle in drawing process. Based on the analysis, we tried to obtain the raw material strength of common rail fuel injection tube for applying to the ultra high pressure common rail system. As a result, Plug angle is more important than entry angle of Die and we could obtain the target dimension and strength of the ultra high pressure common rail fuel injection tube through optimization of Plug angle.

• 복식문화연구
• /
• 제5권4호
• /
• pp.130-158
• /
• 1997

This study outputs calculation of regression of each items for production of torso basic pattern according to 6 body types as the result of another study and intends to present drawing method of torso model by short measure method modified and supplied and supplied by experiments of wearing clothing. SAS(Statistical Analysis System) is used for figures management and methods for analysis used are Frequency Analysis, Means Analysis, Regression Analysis, Correlation Analysis, etc. Results are as follows. 1. Correlation analysis is used to output the size necessary for torso prototype drawing by sort measure method and waist front length, back length, crotch length, shoulder point-cerricale-shoulder point, bust circumference, waist circumference, weight, etc, are set up as representative items calculation of regression of each type is suggested. 2. In the result of experiment of the first wearing clothing intended for 5 in each type and the whole 30, to develop torso prototype drawing method by short measure method, as we find some problems of the shape and propriety of neck root circumference line, the position of shoulder point, pulling or hold armpit parts, waist circumference line, the degree of dissatisfaction is high, so the second experiment of wearing clothing is propriety of each part is improved, all items except the length and quantity of shoulder dart, waist in back bodice, clearance quantity of hip circumference, and the place of shoulder line in side bodice. So, it was modifed and supplied and then the third torso prototyped drawing method by shout measure method was suggested. The third prototype drawing method was suggested, by modifying and supplying.

• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.195-207
• /
• 1999

Classification and Coding(C&C) systems as a core of design information management have been accomplished by many studies in terms of design and manufacturing attribute based on Group Technology. Those are very difficult to apply in make-to-order(MTO) manufacturing because the environment of MTO has various characteristics of product, many licensors, engineering change, insufficiency of integrated management system for codes and so on. This paper presents a suitable C&C system to MTO manufacturing which consider management level and drawing. The steps of developing the C&C system are as follows: 1) analysis of existing coding system and drawing type; 2) design of C&C system; 3) practice of designed coding system to a field.

• 한국건축시공학회지
• /
• 제7권3호
• /
• pp.91-98
• /
• 2007

Recently a construction industry introduces information that brings about many advantages in the early planning phase, design phase and construction phase. Especially it replaces 2D, 3D systems(usually using explanation of drawing information) ai 4D CAD(offering a sort of 4D-having relation of construction schedule and 3D drawing information). Nevertheless a 4D has these benefits, it has limits which are not only usually using 3D modeling but also limit of making full use of practical affairs because of a lack of connecting varietals of progress of work. To solve these uppermost limits, this research is presenting unified systems to use in risk management which are efficient management of space and non-space information, space analysis, making full use of data base, introducing GIS system of easy interaction.

• 대한토목학회논문집
• /
• 제28권4D호
• /
• pp.553-560
• /
• 2008

건설산업의 생산성 향상 및 건설사업관리의 효율성 제고를 위해 국가차원에서의 건설 CALS/EC 표준을 개발한바 수자원 분야에서도 국가 전자도면 작성기준에 준한 표준체계의 개발이 필요한 시기이다. 따라서 본 연구에서는 국가 건설CALS/EC를 지원하기 위한 수자원분야 전자도면정보의 표준체계 개발전략을 수립하였다. 이를 위해, 수자원분야 공공기관의 건설사업관리시스템, 건설유지관리시스템, 도면작성기준서 등 건설관련 분야의 도면정보 표준, 국내 전자도면 작성표준과 ISO, 미국 NCS, 일본표준에서 포함하고 있는 도면표준을 분석하였다. 그 결과, 건설CALS/EC 지원을 위한 수자원분야 도면정보 표준의 기본적인 방향을 제안하였다. 실무적으로 표준체계를 적용하기 위해, 수자원 분야 공공기관의 현행 표준체계와도 연계되면서 국가 건설CALS/EC을 준수하도록 번호부여체계를 수립하였다. 따라서 본 연구는 건설CALS/EC을 지원하기 위한 수자원 분야의 기본적인 표준화 방향 및 번호부여 규칙을 제시하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.970-973
• /
• 2003

최근 들어 기업 내 또는 기업간 정보시스템의 개발 패러다임은 2계층 환경에서 3계층 환경으로 이동해오고 있다. 3계층 환경은 시스템의 성능, 확장성, 배포성, 유지보수 등의 측면에서 보다 효율적인 시스템의 구성을 가능하게 한다. 장기간의 설계기간과 대규모의 설계인원을 대상으로 하는 선박의 설계공정관리 시스템은 정보의 실시간성, 정확성이 확보되어야 함에도 불구하고 현재 2계층 환경으로 일부 개발되어 사용되고 있으며, 여전히 미 개발된 업무들도 있는 실정이다. 본 논문에서는 기존의 2차원적 클라이언트/서버 아키텍처 환경에서 3계층 아키텍처인 COM＋ 기반의 환경으로 전환하기 위해 CBD(Component Based Development)기법을 이용한 시스템의 분석 및 설계를 수행하였다. 향후 CBD 기반의 통합 시스템으로 개발함으로써, 선박 설계공정관리 업무의 생산성 및 효율성을 향상시킬 수 있다. 또한, 컴포넌트의 광범위한 재사용을 통해 시스템의 생산성 및 효율성 향상을 기대할 수 있다.

• Spatial Information Research
• /
• 제18권5호
• /
• pp.47-54
• /
• 2010

기존의 소방대상시설물 도면은 이미지도면이나 CAD도면 형태의 2차원 도면형태로 존재하고 있다. 구축되어 있는 데이터의 형태도 다양한 방식으로 이루어져 있기 때문에 소방방재업무에서 필요로 하는 신속 정확한 대응체계를 위해서는 기존의 2차원 도면형태로 구축된 도면을 3차원으로 변환할 필요가 있다. 본 연구에서는 소방방재 대상이 되는 2차원 건축도면을 3차원 공간정보로 손쉽게 구축하기 위하여 건축도면에 대한 분석과 3차원 공간정보 데이터모델을 설계하고 이를 3차원 공간정보로 변환할 수 있는 툴을 개발하였다. 본 논문에서 제안한 소방대상 2차원 도면의 3차원 변환방법을 통하여 다량의 2차원 도면을 3차원 공간정보로 쉽게 변환할 수 있으며 이를 통해 소방방재 업무의 활용도를 향상 시킬 수 있다.

• 한국전자거래학회지
• /
• 제9권3호
• /
• pp.79-94
• /
• 2004

W3C는 웹 어플리케이션의 온톨로지 활용을 위한 RDF 표준을 개발해 왔다. 이 논문은 도면 데이터의 온톨로지를 추출하고 적용한다. 설계 파일에 포함된 도면의 문서정보와 관리 정보를 주 예로 삼는다. 도면 데이터의 관계를 분석함으로써 RDF 스키마를 먼저 디자인 한다. 스키마를 기반으로 온톨로지가 추출되어 XML 파일로 저장이 된다. 온톨로지 저장을 위한 어플리케이션으로서 재구성 가능한 도면 데이터 레포지터리를 구성할 수 있다. 이 논문의 예제로 사용자는 관심을 항목의 뷰를 선택할 수 있다 (예를 들어. 프로젝트, 도면, 또는 디자이너). 도면 데이터의 다양한 관점으로 사용자는 특정 데이터에 보다 효율적으로 접근 할 수 있다.

• 한국조경학회지
• /
• 제29권2호
• /
• pp.68-76
• /
• 2001

The purpose of this study is to computerize street tree management using a CAD program in order to manage the drawing record of street trees systematically and concurrently. The configuration of this program is composed of Reference Data, Data Inquiry, and Cost Assessment. The Reference Data includes characteristics of trees, monthly managements records, damage by blight and insects and usage of pesticides. The Data Inquiry includes an individual search of the tree index, simple searches and multiple searches. The Cost Assessment includes two main components, the data input with labor cost, manure ocst and pesticide cost and the assesment of management cost for prevention of blight and insects, pruning and fertilization. The results of this study are as follows: 1) When there are practices such as transplanting and removing of street trees it is immediately updated with the various situation. By creating an in progress a tree management system, up to the date information can be given to the manager for decision making. 2) To identify individual tree at the site or in drawing, the street name and numbers were used instead of coordinates. Tree tags are attached to the street trees individually. It can make DB management simple and easy. 3) By doing simple or multiple search with constructed DB, data can be provided quickly. 4) The result of this type of search are useful in the assessment of management cost very useful in regards to items such as the pruning, pesticides scattering and fertilization. 5) By using the AutoCAD software and existing PC without purchasing new equipment, the cost of system implementation can be minimized.

• 한국실내디자인학회논문집
• /
• 제22호
• /
• pp.132-138
• /
• 2000

Internet services are utilizing a variety of server/client technologies. In particular internet technologies provide improved accessibility to information for facility management customers and users for the systems. This study is the architectural data exchange system development more effective management and accept using on Internet web environment. This paper is the explore the use of computers in architectural planning that how the information may be extracted drawing entered into database and exchanged architectural detail data interfaces. System support communication and interactive collaboration among designers through complex Building object during the Design. There are four part in collaborative design system. User Management system, Standard Database System, Project Database System and Interface system. All Data are recognizable format include drawing file and contents. Web/DB server supported communication and collaboration among partners in the building design and construction process. Collaborative Design system is provide new conceptual framework that exist in the Web.