• Textile Coloration and Finishing
• /
• v.20 no.1
• /
• pp.28-35
• /
• 2008

Texturing is the process of including a characteristic of a natural fiber in a synthetic fiber. The most common method of it the false twist texturing. Nylon textured yarn is primarily manufactured by the disk type. The major process parameters or the disk type false twist machine ratio, disk/yarn, and heater temperature. This study therefore investigated the effects of false twist texturing, especially speed and draw ratio, on the physical properties of nylon textured yarn. The increase of speed was proportional to the increase of unwinding tension, which could reduce the production efficiency by elevating the tension affecting to fiber during the process. In addition, the increase of speed was inversely proportional to the increase of crimp rigidity of nylon textured yarn. Draw ratio was proportionally increased with the increase of tenacity and the reductions of fineness and elongation, showing the influence or draw ratio to the ultimate physical properties of textured yarn.

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.47-52
• /
• 2008

Nylon textured yarn is usually manufactured by disk type false twist texturing. Dyeing properties of nylon textured yam have not been studied yet. In this study, dyeing properties of nylon textured yam according to draw ratio out of process parameters were investigated. The fact that microstructure of nylon textured yarn in amorphous region particularly is transformed by draw ratio was confirmed indirectly by measurement of dyeing rate because dyeing rate was affected by the structure of amorphous region. Dyeing rate at draw ratio 1.29 was the lowest because the higher draw ratio increase amorphous orientation and disturb dye diffusion into amorphous region. The microstructure according draw ratio was indirectly confirmed by 5% strength, tenacity, elongation. But difference in K/S value and fastness was insignificant.

• Fashion & Textile Research Journal
• /
• v.12 no.4
• /
• pp.500-507
• /
• 2010

In this study, physical properties were studied by using latent stretching yarn in order to develop the texturing yarn technique for super bulky yarn, which is better in bulkiness and handle than natural wool and also adds property of synthetic fiber to natural wool. In order to obtain textured conditions by analysing basic properties for manufacturing DTY yarn with super bulky property, DTY 50d/12 after spinning latent yarn spined POY 80d/12 was obtained under the two conditions of (i) false twist(T/M) level 3 in DTY texturing and (ii) draw ratio level 4 in draw texturing. For DTY texturing yarn, Elongation rate increased as the heat treatment time and temperatures increased. In addition, shrinkage became higher as false twist was higher, so that elongation rate became lower. When annealing became longer in time and higher in temperature, initial modulus increased. In addition, as the count of false twist increased, the initial modulus showed higher values. For draw texturing yarn, under the conditions of heat temperature 180 and heating time 30 minutes, shrinkage rate in draw ratio 1.55 and 1.6 draw ratio was 7%, and that in 1.65 and 1.7 draw ratio was 8.5%. High draw ratio samples' tenacity was much influenced by heating time and temperature, but low draw ratio samples' tenacity was influenced not by treated time, but by treated temperature.

• Textile Coloration and Finishing
• /
• v.30 no.2
• /
• pp.70-76
• /
• 2018

The dyeing behaviors of poly(ethylene terephthalate)(PET) bulky yarns, DTY(draw textured yarn) and SSY(latent crimped yarn), were investigated with different energy type disperse dyes compared with those of SDY(spin draw yarn). The maximum exhaustions of E-type disperse Red 60, Blue 56 and Yellow 54 on SSY were 99%, 94% and 93%, respectively. The maximum exhaustions of S-type disperse Red 179, Blue 79 and Orange 30 on SSY were 96%, 97% and 97%, respectively. The K/S values of SSY were significantly higher than those of DTY and SDY in all energy type of disperse dyes. The knit fabric composed of SSY became bulky at the end of high temperature dyeing process because of their thermal shrinkage property due to melt viscosity difference.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.79-88
• /
• 2000

Draw textured yarns have many differences with yarn quality as well as wearing, due to the bulkiness, thermal and physical properties according to the false twist texturing system. In order to improve such property, many studies have been accomplished for developing good textured yarns and their fabrics, but these have been essentially obtained by experimental data or mathematical analysis. This study surveyed various properties of DTY produced by false twist texturing system, namely pin and crossed-belt false twist insertion systems. And 6 yarn specimens of 2 group(pin twisting type, belt twisting type) were measured and analysed.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.39-40
• /
• 2003

This research surveys the effects of POY physical properties and processing conditions of belt texturing machine to the draw textured yarns. The various textured yarns are made with variation of 1st heater temperature, draw ratio and velocity ratio, and the physical properties of these specimens such as yarn linear density, tensile properties and wet and dry thermal shrinkages are measured and analyzed with POY physical properties and processing conditions of texturing machine. Especially yarn mechanical properties of DTY are analysed with the variation of untwisting tension (T$_2$) on the untwisting part in DTY process and thin and thick DTY yam model are proposed with surging phenomena in DTY process.

• Textile Coloration and Finishing
• /
• v.15 no.6
• /
• pp.33-38
• /
• 2003

This study surveys the effects of POY physical properties and processing conditions of belt texturing machine to the textured yarns. The various textured yarns are made with the variations of 1st heater temperature, draw ratio, velocity ratio, and the physical properties of these specimens such as yam linear density, tenacity, breaking strain, and wet and dry thermal shrinkages are measured and analysed with the various processing conditions of texturing machine. Especially, the thermal characteristics of the textured yarns, which are affected at the fabric hands and the determination of the processing conditions in the dyeing and finishing processes, are investigated through the thermal stress analyser and DSC experiments.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.3
• /
• pp.149-154
• /
• 2005

The purpose of this study was to develop the High Functional Stretch Yarns and Woven Fabrics to produce the high value added textile goods and to meet the consumer's needs. For the study 8 yarns and 10 fabrics were made with three develop machine and the thermal-stress properties of the sample were tested and analysed. The result indicated that the sample fabrics kept their stretch performance regardless of conventional process. EDY(elastic DTY) had higher stretch than that of DTY(drawn textured yarn). Especially Macel yarn had higher stretch than that of DTY compared with the same condition of yarn. With time course behavior the elongation of DTY and EDY had stabled tendency without variation. The above results show that wearing sensation and comfort properties of fabrics are changed depending on the end-use. and thus, above results can be used to manufacture of fabrics for specific end-use with high comfort properties.

• Science of Emotion and Sensibility
• /
• v.17 no.4
• /
• pp.71-78
• /
• 2014

Composite draw textured yarns(DTY) and air jet textured yarns(ATY) with hollow PET filament have been used for making high emotional fabrics including light weight sports wear garments. This study investigated effect of hollow composite yarns and fabric structural parameters to the comfort properties related to the moisture and thermal transport phenomena for the composite fabrics made of DTY and ATY with hollow PET filament. Wicking property of hollow composite fabric was superior at the high pore size fabric and was not influenced by fabric cover factor. Wicking property of the fabric with ATY was better than that of the fabric with DTY. On the other hand, drying rate of fine pore sized fabric was shorter than that of large pore sized fabric and drying rate of high multi yarn fabric with low cover factor and small pore size was superior than that of hollow composite fabric. The pore size of the fabric was dominant factor in the air permeability and thermal conductivity of hollow composite fabric. High pore sized fabric showed high air permeability and thermal conductivity of hollow composite fabric was nonlinearly inversely proportional to pore size of the fabric.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.1-4
• /
• 2004

This research surveys the twisting and untwisting tensions according to the various processing conditions of belt type texturing such as draw ratio, 1st heater temperature and velocity ratio. The 1st heater temperature was changed from 1606{\circ}C\; to\; 220^{\circ}C$, draw ratio was changed from 1.6 to 1.9 and velocity ratio was changed from 1.4 to 1.8. The twisting and untwisting tensions are measured with the variation of these processing conditions, in addition, the untwisting tension(T2) and tension ratio(T2/Tl) according to the various processing conditions are analysed with the false twist mechanism which is affected to the physical properties of draw textured yams.