• 한국전산유체공학회지
• /
• 제10권3호
• /
• pp.27-35
• /
• 2005

A design optimization of hypersonic flight vehicle has been studied by using upwind Navier-Stokes method and numerical optimization method. CFD method is linked to numerical optimization method by using a Bezier curve and a design optimization of blunt nose hypersonic flight vehicle has been studied. Heat transfer coefficient and drag coefficient are selected as objective functions or design constraints. The Bezier curve-based shape function was applied to blunt body shape.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.82-85
• /
• 2008

수중에서 발사체가 고속으로 주행할 때 발사체의 머리 즉, 캐비테이터 만이 물과 접촉한 상태에서 커다란 공동이 발생하여 몸체 전체를 뒤덮는 초공동현상이 발생한다. 초공동 상태에서는 발사체는 저항이 감소되어 매우 빠른 속도를 낼 수 있게 된다. 더욱이 캐비테이터가 적합한 형상을 가지게 되면 매우 낮은 압력저항을 유지하고 전체적인 저항도 획기적으로 줄일 수 있기 때문에 본 연구에서는 주어진 작용환경 하에서 저항을 최소화 하기위한 최적의 캐비테이터 형상최적설계 문제를 고려하였다. 그리고 효율적인 캐비테이터 형상최적화를 위해 공동과 캐비테이터 형상을 하나의 죄적화로 변환한 동시최적화기법을 수행하였다.

• 한국철도학회논문집
• /
• 제19권6호
• /
• pp.709-716
• /
• 2016

고속열차의 공기저항 저감을 위해 KTX-산천의 구성요소별 공기저항을 상세하게 분석하였다. 전체 공기저항의 약 42.9%는 동력차(선두차, 후미차)에서 그리고 약 10.1%는 대차에서 유발되는 것으로 나타났다. 전두부의 공기저항 저감을 위해 Broyden-Fletcher-Goldfarb-Shanno 기법을 이용한 전두부 최적설계를 수행하였다. 그리고 차체 공기저항 저감을 위해 동력차 형상 변화 및 대차커버를 적용하였다. 공기저항 저감을 위해 최적설계된 편성열차의 공기저항은 KTX-산천 대비 약 15.0% 저감되었으며, 주행저항은 속도 350km/h에서 약 12% 감소될 것으로 예상된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.373-379
• /
• 2001

When a train runs into a tunnel at high-speed, aerodynamic drag suddenly increases and the booming noise is generated at the exit of tunnel. The noise shape is very important to reduce the aerodynamic drag in tunnel as well as on open ground, and the micro-pressure wave that is a source of booming noise is dependent on nose shape, especially on area distribution. In this study, the nose shape has been optimized employing the response surface methodology and the axi-symmetric compressible Navier-Stokes equations. The optimal designs have been executed imposing various conditions of the aerodynamic drag and the micro-pressure wave on object functions. The results show that the multi-objective design was successful to decrease micro-pressure wave and aerodynamic drag of trains.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.177-185
• /
• 1999

The airfoil design optimization procedures based on the Navier-Stokes equations were developed, This procedure enables more realistic and practical transonic airfoil designs. The modified Hicks-Henne functions were used to generate the shape of airfoils. Five Hick-Henne functions were used to design upper surface of airfoil only. To enhance the ability of Hick-Henne function to generate various airfoil shape with limited number of functions, the positions of control points were adjusted through optimization procedure. The design procedure was applied to the single-point design for the drag minimization problem with lift and area constraints. The result shows the capability of the procedure to generate much realistic airfoils with very small drag-creep in the low transonic regime. This is mainly due to the viscosity effect of Navier-Stokes flow analysis. However, in the higher transonic range tile drag-creep appears. The multi-point design is shown to be an effective way to avoid the drag-creep and improve off-design performance which is very similar in the Euler design.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.96-106
• /
• 2008

We review a series of studies on turbulent skin friction drag reduction in wall-turbulence recently conducted in Japan. First, an identity equation relating the skin friction drag and the Reynolds shearstress (the FIK identity) is introduced. Based on the implication of the FIK identity, a new analytical suboptimal feedback control law requiring the streamwise wall-shear stress only is introduced and direct numerical simulation (DNS) results of turbulent pipe flow with that control is reported. We also introduce DNS of an anisotropic compliant surface and parameter optimization using an evolutionary optimization technique.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.518-520
• /
• 2015

Automotive aerodynamic drag coefficient is important variable for vehicle's driving performance and fuel economy. In this research, we applied genetic algorithm to determine the geometrical figure which can optimize Carr's automotive aerodynamic underbody coefficient. And it's verified by previous research.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권6호
• /
• pp.693-704
• /
• 2017

Blended-Wing-Body Underwater Glider (BWBUG), which has excellent hydrodynamic performance, is a new kind of underwater glider in recent years. In the shape optimization of BWBUG, the lift to drag ratio is often used as the optimization target. However this results in lose of internal space. In this paper, the energy reserve is defined as the direct proportional function of the internal space of BWBUG. A motion model, which relates gliding range to steady gliding motion parameters as well as energy consumption, is established by analyzing the steady-state gliding motion. The maximum gliding range is used as the optimization target instead of the lift to drag ratio to optimizing the shape of BWBUG. The result of optimization shows that the maximum gliding range of initial design is increased by 32.1% though an Efficient Global Optimization (EGO) process.

• 대한기계학회논문집B
• /
• 제29권10호
• /
• pp.1163-1171
• /
• 2005

The shape optimization of an airfoil has been performed for an incompressible viscous flow. In this study, Pareto frontier sets, which are global and non-dominated solutions, can be obtained without various weighting factors by using the multi-objective genetic algorithm An NACA0012 airfoil is considered as a baseline model, and the profile of the airfoil is parameterized and rebuilt with four Bezier curves. Two curves, front leading to maximum thickness, are composed of five control points and the rest, from maximum thickness to tailing edge, are composed of four control points. There are eighteen design variables and two objective functions such as the lift and drag coefficients. A generation is made up of forty-five individuals. After fifteenth evolutions, the Pareto individuals of twenty can be achieved. One Pareto, which is the best of the . reduction of the drag furce, improves its drag to $13\%$ and lift-drag ratio to $2\%$. Another Pareto, however, which is focused on increasing the lift force, can improve its lift force to $61\%$, while sustaining its drag force, compared to those of the baseline model.

• 한국군사과학기술학회지
• /
• 제22권4호
• /
• pp.527-535
• /
• 2019

Hanger in a rail-launched missile protrudes in general and causes to increase significant drag force. One method to avoid the significant increase of drag force is to apply fairings on the hanger. In this paper, sloping shaped fairing parameters of height, width, and length are optimized to minimize the drag force under subsonic speed region by examining three configurations of fairings : front-fairing only, rear-faring only, and the both front and rear fairing. We use Latin Hypercube Sampling method to determine the experimental points, and computational fluid dynamics with incompressible RANS solver was applied to acquire the data at sampling points. Then, we construct a meta model by kriging method. We find the best choice among three configurations examined : both front and rear fairing reduce the drag force by 63 % without the constraint of fairing mass, and front fairing reduced the drag force by 52 % with the constraint of hanger mass.