• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3C
• /
• pp.408-418
• /
• 2004

In this paper, we propose a novel scalable video coding algorithm based on adaptively weighted multiple reference frame method. To improve the coding efficiency in the enhancement layer, the enhancement frame is predicted by the sum of adaptively weighted double motion compensated frames in the enhancement layer and the current frame in the base layer, according to the input video characteristics. By employing adaptive reference selection scheme at the decoder, the proposed method reduce the drift problem significantly. From the experimental results, the proposed algorithm shows more than 1.0 ㏈ PSNR improvement, compared with the conventional scalable H.263+ for various packet loss rate channel conditions.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.4
• /
• pp.247-256
• /
• 2016

An analysis of light curves and spectra of observed gamma-ray bursts in gamma-ray ranges is frequently demanded because the prompt emission contains immediate details regarding the central engine of gamma-ray bursts (GRBs). We have revisited the relationship between the collimation-corrected peak luminosity and the spectral lag, investigating the lag-luminosity relationships in great detail by focusing on spectral lags resulting from all possible combinations of channels. Firstly, we compiled the opening angle data and demonstrated that the distribution of opening angles of 205 long GRBs is represented by a double Gaussian function having maxima at ~ 0.1 and ~ 0.3 radians. We confirmed that the peak luminosity and the spectral lag are anti-correlated, both in the observer frame and in the source frame. We found that, in agreement with our previous conclusion, the correlation coefficient improves significantly in the source frame. It should be noted that spectral lags involving channel 2 (25-50 keV) yield high correlation coefficients, where Swift/Burst Alert Telescope (BAT) has four energy channels (channel 1: 15-25 keV, channel 2: 25-50 keV, channel 3: 50-100 keV, channel 4: 100-200 keV). We also found that peak luminosity is positively correlated with peak energy.

• Wind and Structures
• /
• v.4 no.1
• /
• pp.45-62
• /
• 2001

This paper is focused on the torsional effects that are induced on bridge piers by unbalanced wind buffeting on the deck during double cantilever erection stages. The case of decks with variable cross section is considered in particular as this characteristic is typical of most frame bridges that are built by the cantilever method. The procedure outlined in the paper is basically an application of the method that Dyrbye and Hansen (1996) have illustrated for decks with constant cross section. This format was chosen because it is suitable for design purposes and may easily be implemented in structural codes. As a complement, the correspondence with the format that is adopted in the Canadian code (NBCC 1990) for the gust factor is established, which might be useful to bridge designers used to the North-American approach to the gust effects on structures. Only alongwind turbulence and horizontal movements of the deck are considered. The combination of torsional and bending effects is also discussed and it is illustrated with an example of application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.8
• /
• pp.1146-1158
• /
• 1993

In this paper, parallel scrambling techniques are considered for practical use in the SDH transmission and the ATM transmission. In the ATM transmission, there are two ways of transmitting ATM cells - the SDH-based and the cell-based - and the corresponding scrambling techniques differ accordingly. For the SDH transmission and the SDH-based ATM transmission, the FSS (frame synchronous scrambling) is applied to the STM frames : while for the cell-based ATM trans-mission, the DSS(distributed sample scrambling) is used on the ATM cell stream. The parallel scrambling techniques are examined for the FSS and the DSS, and applied to achieve the parallel FSSs for use in the SDH and the SDH-based ATM transmission along with the parallel DSS applicable to the cell-based ATM transmission. The resulting(8, 4) PSRG(parallel shift resister generator) and (8, 16) PSRG based parallel scramblings are directly applicable for the STM-1 rate processing of the STM-4 and STM-16 scramblings, respectively. Likewise, the resulting (1, 8)PSRG and double-sampling-double-correction based parallel scrambling techniques can be practically used for a low-rate processing of the SDH-based and the cell-based ATM signal scrambling respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.2
• /
• pp.246-251
• /
• 2014

In this paper, a high-speed CMOS Image Sensor (CIS) based on a 10-bit two step Single Slope A/D Converter (SS-ADC) is proposed. The A/D converter is composed of both 5-bit coarse ADC and a 6-bit fine ADC, and the conversion speed is 10 times faster than that of the single-slope A/D convertor. In order to reduce the pixel noise, further, a Hybrid Correlated Double Sampling (H-CDS) is also discussed. The proposed A/D converter has been fabricated with 0.13um 1-poly 4-metal CIS process, and it has a QVGA ($320{\times}240$) resolution. The fabricated chip size is $5mm{\times}3mm$, and the power consumption is about 35 mW at 3.3 V supply voltage. The measured conversion speed is 10 us, and the frame rate is 220 frames/s.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.137-138
• /
• 2010

This paper presents new seismic control system that utilize toggle brace to amplify the displacement of damper. A full scale steel moment frame was constructed for the purpose of testing the energy dissipation system with double toggle brace.

• Steel and Composite Structures
• /
• v.34 no.4
• /
• pp.599-613
• /
• 2020

In this article, free vibration attributes of double-walled carbon nanotubes based on nonlocal elastic shell model have been investigated. For this purpose, a nonlocal Flügge shell model is established to observe the small scale effect. The wave propagation is employed to frame the governing equations as eigenvalue system. The influence of nonlocal parameter subjected to different end supports has been overtly examined. A suitable choice of material properties and nonlocal parameter been focused to analyze the vibration characteristics. The new set of inner and outer tubes radii investigated in detail against aspect ratio and length. The dominance of boundary conditions via nonlocal parameter is shown graphically. The results generated furnish the evidence regarding applicability of nonlocal shell model and also verified by earlier published literature.

• Journal of Communications and Networks
• /
• v.12 no.1
• /
• pp.43-51
• /
• 2010

IEEE 802.11 defines distributed coordination function (DCF), which is characterized by CSMA/CA and binary exponential backoff (BEB) algorithm. Most modifications on DCF so far have focused on updating of the contention window (CW) size depending on the outcome of own frame transmission without considering freezing periods experienced in the backoff interval. We propose two simple but novel schemes which effectively utilize the number of freezing periods sensed during the current backoff interval. The proposed schemes can be applied to DCF and its family, such as double increment double decrement (DIDD). Saturation throughput of the proposed schemes is analyzed by means of Bianchi's Markovian model. Computer simulation validates the accuracy of the analysis. Numerical results based on IEEE 802.11b show that up to about 20% improvement of saturation throughput can be achieved by combining the proposed scheme with conventional schemes when applied to the basic access procedure.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.283-289
• /
• 1998

In the latticed domes which is a set of space frame, buckling is derived if the external force reaches a limitation by the lightness of the material and the minimization of the member section area. these are concerned with a geometric shape, network pattern, the number of layer, and so on. Most of all, the number of layer of the lattice dome is a important factor from the viewpoint of initial and structure design. Therefore this study compared buckling characteristics of single-layer with double-layer latticed domes and investigated the relativity of buckling-stress-ratio and member-density-ratio according to rise ratio to improve that designers could extend the range of .design selection

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.152-159
• /
• 2007

This paper describes the design, fabrication, and measurement of ROIC(ReadOut Integrated Circuit) for $320{\times}256$ IRFPA(InfraRed Focal Plane Array). A ROIC plays an important role that transfer photocurrent generated in a detector device to thermal image system. Recently, the high performance and low power ROIC adding various functions is being required. According to this requirement, the design of ROIC focuses on 7MHz or more pixel rate, low power dissipation, anti-blooming, multi-channel output mode, image reversal, various windowing, and frame CDS(Correlated Double Sampling). The designed ROIC was fabricated using $0.6{\mu}m$ double-poly triple-metal Si CMOS process. ROIC function factors work normally, and the power dissipation of ROIC is 33mW and 90.5mW at 7.5MHz pixel rate in the 1-channel and 4-channel operation, respectively.