• Title/Summary/Keyword: double tooth

Search Result 100, Processing Time 0.026 seconds

Alveolar ridge preservation with an open-healing approach using single-layer or double-layer coverage with collagen membranes

  • Choi, Ho-Keun;Cho, Hag-Yeon;Lee, Sung-Jo;Cho, In-Woo;Shin, Hyun-Seung;Koo, Ki-Tae;Lim, Hyun-Chang;Park, Jung-Chul
    • Journal of Periodontal and Implant Science
    • /
    • v.47 no.6
    • /
    • pp.372-380
    • /
    • 2017
  • Purpose: The aim of this prospective pilot study was to compare alveolar ridge preservation (ARP) procedures with open-healing approach using a single-layer and a double-layer coverage with collagen membranes using radiographic and clinical analyses. Methods: Eleven molars from 9 healthy patients requiring extraction of the maxillary or mandibular posterior teeth were included and allocated into 2 groups. After tooth extraction, deproteinized bovine bone mineral mixed with 10% collagen was grafted into the socket and covered either with a double-layer of resorbable non-cross-linked collagen membranes (DL group, n=6) or with a single-layer (SL group, n=5). Primary closure was not obtained. Cone-beam computed tomography images were taken immediately after the ARP procedure and after a healing period of 4 months before implant placement. Radiographic measurements were made of the width and height changes of the alveolar ridge. Results: All sites healed without any complications, and dental implants were placed at all operated sites with acceptable initial stability. The measurements showed that the reductions in width at the level 1 mm apical from the alveolar crest (including the bone graft) were $-1.7{\pm}0.5mm$ in the SL group and $-1.8{\pm}0.4mm$ in the DL group, and the horizontal changes in the other areas were also similar in the DL and SL groups. The reductions in height were also comparable between groups. Conclusions: Within the limitations of this study, single-layer and double-layer coverage with collagen membranes after ARP failed to show substantial differences in the preservation of horizontal or vertical dimensions or in clinical healing. Thus, both approaches seem to be suitable for open-healing ridge preservation procedures.

Double versus single cartridge of 4% articaine infiltration into the retro-molar area for lower third molar surgery

  • Sawang, Kamonpun;Chaiyasamut, Teeranut;Kiattavornchareon, Sirichai;Pairuchvej, Verasak;Bhattarai, Bishwa Prakash;Wongsirichat, Natthamet
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • v.17 no.2
    • /
    • pp.121-127
    • /
    • 2017
  • Background: There are no studies regarding 4% articaine infiltration injection into the retro-molar area for an impacted lower third molar (LITM) surgery. This study aimed to evaluate the efficacy of infiltration using 1.7 ml (single cartridge: SC) of 4% articaine versus 3.4 ml (double cartridges: DC) of 4% articaine with 1:100,000 epinephrine in LITM surgery. Method: This study involved 30 healthy patients with symmetrical LITM. The patients were assigned to receive either a DC or SC of 4% articaine with 1:100,000 epinephrine as a local anesthetic for each operation. Onset, duration, profoundness, need for additional anesthetic administration, total volume of anesthetic used, vitality of the tooth, and pain score during operation were recorded. Results: The DC of 4 % articaine had a significantly higher success rate (83.3%) than did the SC (53.3%; P<0.05). The duration of soft tissue anesthesia was longer in the DC group. The intra-operative pain was higher in the SC group with a significant (P < 0.05) requirement for a supplementary local anesthetic. Conclusion: We concluded that using DC for the infiltration injection had a higher success rate, longer duration of anesthesia, less intra-operative pain, and a lower amount of additional anesthesia than SC in the surgical removal of LITM. We recommend that a DC of 4% articaine and a 1:100,000 epinephrine infiltration in the retro-molar region can be an alternative anesthetic for LITM surgery.

The double-barrier technique using platelet-rich fibrin for closure of oroantral fistulas

  • Jae-Woong Jung;Sung ok Hong;Eun-Jee Lee;Ra-Yeon Kim;Yu-Jin Jee
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.49 no.3
    • /
    • pp.163-168
    • /
    • 2023
  • An oroantral fistula (OAF) or oroantral communication (OAC) is an opening between the oral cavity and the maxillary sinus. If left untreated, these openings may cause chronic maxillary sinusitis. Although small defects (diameter <5 mm) may close spontaneously, larger communications require surgical intervention. Various studies have been conducted on OAC closure using a platelet-rich fibrin (PRF) membrane; most of these prior studies have involved simple direct application of PRF clots. This study introduces a new "double-barrier technique" using PRF for closure of an OAF involving sinus mucosal lifting and closure. The PRF material is inserted into the prepared maxillary sinus space, and the buccal advancement flap covers the oral side. This technique was successfully used to treat two patients with chronic OAF in the posterior maxillary region after implant removal or tooth extraction. The use of a PRF membrane in a double-barrier technique may have advantages in soft-tissue healing and could enable easy closure of chronic OAF with minimal trauma.

Efficacy of intraosseous saline injection for pain management during surgical removal of impacted mandibular third molars: a randomized double-blinded clinical trial

  • Jawahar Babu. S;Naveen Kumar Jayakumar;Pearlcid Siroraj
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • v.23 no.3
    • /
    • pp.163-171
    • /
    • 2023
  • Background: Surgical extraction of impacted mandibular third molars is the most common procedure performed by oral surgeons. The procedure cannot be performed effectively without achieving profound anesthesia. During this procedure, patients may feel pain during surgical bone removal (at the cancellous level) or during splitting and luxation of the tooth, despite administration of routine nerve blocks. Administration of intraosseous (IO) lignocaine injections during third molar surgeries to provide effective anesthesia for pain alleviation has been documented. However, whether the anesthetic effect of lignocaine is the only reason for pain alleviation when administered intraosseously remains unclear. This conundrum motivated us to assess the efficacy of IO normal saline versus lignocaine injections during surgical removal of impacted mandibular third molars. The aim of this study was to assess the efficacy of IO normal saline as a viable alternative or adjunct to lignocaine for alleviation of intraoperative pain during surgical removal of impacted mandibular third molars. Methods: This randomized, double-blind, interventional study included 160 patients who underwent surgical extraction of impacted mandibular third molars and experienced pain during surgical removal of the buccal bone or sectioning and luxation of the tooth. The participants were divided into two groups: the study group, which included patients who would receive IO saline injections, and the control group, which included patients who would receive IO lignocaine injections. Patients were asked to complete a visual analog pain scale (VAPS) at baseline and after receiving the IO injections. Results: Of the 160 patients included in this study, 80 received IO lignocaine (control group), whereas 80 received IO saline (study group) following randomization. The baseline VAPS score of the patients and controls was 5.71 ± 1.33 and 5.68 ± 1.21, respectively. The difference between the baseline VAPS scores of the two groups was not statistically significant (P > 0.05). The difference between the numbers of patients who experienced pain relief following administration of IO lignocaine (n=74) versus saline (n=69) was not statistically significant (P > 0.05). The difference between VAPS scores measured after IO injection in both groups was not statistically significant (P >0.05) (1.05 ± 1.20 for the control group vs. 1.72 ± 1.56 for the study group) Conclusion: The study demonstrates that IO injection of normal saline is as effective as lignocaine in alleviating pain during surgical removal of impacted mandibular third molars and can be used as an effective adjunct to conventional lignocaine injection.

A Retrospective Study of Critical Success Factors in Regenerative Endodontic Treatment (재생근관치료의 성공에 영향을 미치는 결정 요인에 대한 후향적 연구)

  • Jeong, Hwakyong;Lee, Nanyoung;Lee, Sangho
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.44 no.1
    • /
    • pp.47-55
    • /
    • 2017
  • This study evaluated critical factors influencing the success of regenerative endodontic treatment for necrotic immature permanent teeth. The study enrolled patients who had regenerative endodontic treatment in a necrotic immature permanent tooth through 1-year follow-up. Possible explanatory variables related to the success rates for 46 teeth were age, gender, dental stage at the initial appointment, etiology, treatment information, and clinical and radiographic outcomes. The dental stage at the time of regenerative endodontic treatment did not influence the success rate. The success rate was significantly related to the etiology of the necrotic immature tooth. The success rate according to etiology decreased in the following order: dens evaginatus, caries, and trauma. There was also a significant difference according to the type of antimicrobial. The success rate was influenced by appropriate disinfection of the root canal system, provision of a scaffold, and coronal sealing. Above all, careful case selection is necessary for treating a necrotic immature permanent tooth, especially in cases of trauma.

Full mouth rehabilitation with vertical increase in patient with severe tooth wear using monolithic zirconia prosthetic restoration (과도한 치아마모를 보이는 환자에서 수직교합고경의 증가를 동반한 단일구조 지르코니아 보철물 전악수복)

  • Bang, Ji Won;Kim, Seong-A;Lim, Sun Yong;Lee, Yong-Sang
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.58 no.4
    • /
    • pp.369-377
    • /
    • 2020
  • Gradual teeth wear is normal physiological progress, severe tooth wear can causes dysfunction, occlusal plane disharmony and esthetic problems. If additional space is needed for prosthetic restoration due to severe attrition, full mouth rehabilitation with increase of occlusal vertical dimension may be considered. In this case, 72 year old male patient with severe worn dentition, irregular gingival zenith and deep anterior bite was treated by full mouth rehabilitation for regaining the space for restoration, improving relationship and esthetic of anterior teeth. Provisional restoration obtained by systemic analysis, diagnosis and re-evaluation for a sufficient time was replicated to final restorations through double scanning technique using monolithic zirconia blocks. Satisfactory functional and esthetic outcomes were obtained.

A comparison of different compressive forces on graft materials during alveolar ridge preservation

  • Cho, In-Woo;Park, Jung-Chul;Shin, Hyun-Seung
    • Journal of Periodontal and Implant Science
    • /
    • v.47 no.1
    • /
    • pp.51-63
    • /
    • 2017
  • Purpose: Following tooth extraction, alveolar ridge preservation (ARP) can maintain the dimensions of ridge height and width. Although previous studies have demonstrated the effects of ARP, few if any studies have investigated the compressive force applied during grafting. The aim of this study was to determine the effects of different compressive forces on the graft materials during ARP. Methods: After tooth extraction, sockets were filled with deproteinized bovine bone mineral with 10% porcine collagen and covered by a resorbable collagen membrane in a double-layered fashion. The graft materials were compressed using a force of 5 N in the test group (n=12) and a force of 30 N in the control group (n=12). A hidden X suture was performed to secure the graft without primary closure. Cone-beam computed tomography (CBCT) was performed immediately after grafting and 4 months later, just before implant surgery. Tissue samples were retrieved using a trephine bur from the grafted sites during implant surgery for histologic and histomorphometric evaluations. Periotest values (PTVs) were measured to assess the initial stability of the dental implants. Results: Four patients dropped out from the control group and 20 patients finished the study. Both groups healed without any complications. The CBCT measurements showed that the ridge volume was comparably preserved vertically and horizontally in both groups (P>0.05). Histomorphometric analysis demonstrated that the ratio of new bone formation was significantly greater in the test group (P<0.05). The PTVs showed no significant differences between the 2 groups (P>0.05). Conclusions: The application of a greater compressive force on biomaterials during ARP significantly enhanced new bone formation while preserving the horizontal and vertical dimensions of the alveolar ridge. Further studies are required to identity the optimal compressive force for ARP.

Effect of hydrogel-based antibiotic intracanal medicaments on crown discoloration

  • Rayan B. Yaghmoor;Jeffrey A. Platt;Kenneth J. Spolnik;Tien Min Gabriel Chu;Ghaeth H. Yassen
    • Restorative Dentistry and Endodontics
    • /
    • v.46 no.4
    • /
    • pp.52.1-52.11
    • /
    • 2021
  • Objectives: This study evaluated the effects of low and moderate concentrations of triple antibiotic paste (TAP) and double antibiotic paste (DAP) loaded into a hydrogel system on crown discoloration and explored whether application of an adhesive bonding agent prevented crown discoloration. Materials and Methods: Intact human molars (n = 160) were horizontally sectioned 1 mm apical to the cementoenamel junction. The crowns were randomized into 8 experimental groups (calcium hydroxide, Ca[OH]2; 1, 10, and 1,000 mg/mL TAP and DAP; and no medicament. The pulp chambers in half of the samples were coated with an adhesive bonding agent before receiving the intracanal medicament. Color changes (ΔE) were detected by spectrophotometry after 1 day, 1 week, and 4 weeks, and after 5,000 thermal cycles, with ΔE = 3.7 as a perceptible threshold. The 1-sample t-test was used to determine the significance of color changes relative to 3.7. Analysis of variance was used to evaluate the effects of treatment, adhesive, and time on color change, and the level of significance was p < 0.05. Results: Ca(OH)2 and 1 and 10 mg/mL DAP did not cause clinically perceivable tooth discoloration. Adhesive agent use significantly decreased tooth discoloration in the 1,000 mg/mL TAP group up to 4 weeks. However, adhesive use did not significantly improve coronal discoloration after thermocycling when 1,000 mg/mL TAP was used. Conclusions: Ca(OH)2 and 1 and 10 mg/mL DAP showed no clinical discoloration. Using an adhesive significantly improved coronal discoloration up to 4 weeks with 1,000 mg/mL TAP.

CLINICAL STUDY OF MAXILLARY ANTERIOR SUPERNUMERARY TEETH (상악 전치부 과잉치 외과적 발거에 관한 임상적 연구)

  • Song, Woo-Sik;Kim, In-Kwon;Lee, Sang-Hyun;Lee, Wan-Kee
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.27 no.1
    • /
    • pp.46-53
    • /
    • 2001
  • The prevalence of supernumerary teeth is between $1{\sim}3%$. Of these, $90{\sim}98%$ occur in the maxilla with particular predilection for the premaxilla, preceded by mandibular third premolars, mandibular forth molars and maxillary paramolars. The most common ones occur in the maxillary anterior region, they may occur singly between the central incisors(mesiodens), or they may be double(mesiodentes). Maxillary anterior supernumeraries may erupt into the oral cavity or remain unerupted. It is found that approximately 25% are erupted, while the rest are unerupted. They are usually a small tooth with a cone-shaped crown and a short root. They may cause delayed eruption, median diastema, bodily displacement or rotation of the adjacent permanent teeth. Occasionally they may lead to the developement of dentigerous cyst or primordial cyst, or eruption into nasal cavity. In this study, 109 supernumeraries surgically extracted from premaxilla in 84 patients are analysed. The results are as follows : 1. Sex distribution of male and female is 2.2 : 1. 2. Almost cases are in pediatric age from 5 to 12 years old (87%). 3. Problems with supernumeraries are tooth malpositon, diastema, delayed eruption, eruption to nasal cavity and cyst formation. 4. Of 109 supernumeraries, 16(15%) are erupted into oral cavity, 92(84%) are impacted, and 1(1%) is erupted into nasal cavity. 5. Of 84 patients, 59(70%) have one supernumeray while 25(30%) have two supernumeraries. 6. Of 109 supernumeraries, 96(88%) are found within the region of the central incisors. 7. Of 109 supernumeraries, 94(86%) are vertically impacted, 11(10%) are horizontally impacted, 3(3%) are labiopalatally impacted and 1(1%) is impacted in nasal cavity. 8. Of 84 patients, we used palatal flap in 67(80%), labial flap in 6(7%), both flaps in 4(5%) and no flap in 7(8%). And incisive nerve was cut in 33(49%) of 67 palatal flaps. 9. Extration with ostectomy was done in 72 supernumeraries(66%), without ostectomy in 37 teeth(34%). 10. Extraction with tooth sectioning was done in 21 supernumeraries(19%), without tooth sectioning was done in 88 teeth(81%). 11. We used local anesthesia in 70 patients(83%) and general anesthesia in 14 ones(17%).

  • PDF

3D Processing System of Tooth shape (치형 3차원 가공시스템)

  • Kim, Young-Su;Kim, Nam-Oh;Min, Wan-Ki;Shin, Suck-Doo;Kang, Won-Can;Kim, Young-Dong
    • Proceedings of the KIEE Conference
    • /
    • 2003.07e
    • /
    • pp.120-123
    • /
    • 2003
  • Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts have been very important technique in scientific study and engineering, expecially for system design, manufacturing and inspection. Two camera method keeps accuracy more than double than mechanical method. In this paper, we describe the processes surface data of teeth for automatic processing, transformation that changes to coping data of possible numeric data form, and processed inlay teeth. As the result of the Inlay manufacture, which can process with high resolution, therefore we construct the automatic processing system that depends on manual.

  • PDF