• 제목/요약/키워드: double tooth

검색결과 100건 처리시간 0.026초

Alveolar ridge preservation with an open-healing approach using single-layer or double-layer coverage with collagen membranes

  • Choi, Ho-Keun;Cho, Hag-Yeon;Lee, Sung-Jo;Cho, In-Woo;Shin, Hyun-Seung;Koo, Ki-Tae;Lim, Hyun-Chang;Park, Jung-Chul
    • Journal of Periodontal and Implant Science
    • /
    • 제47권6호
    • /
    • pp.372-380
    • /
    • 2017
  • Purpose: The aim of this prospective pilot study was to compare alveolar ridge preservation (ARP) procedures with open-healing approach using a single-layer and a double-layer coverage with collagen membranes using radiographic and clinical analyses. Methods: Eleven molars from 9 healthy patients requiring extraction of the maxillary or mandibular posterior teeth were included and allocated into 2 groups. After tooth extraction, deproteinized bovine bone mineral mixed with 10% collagen was grafted into the socket and covered either with a double-layer of resorbable non-cross-linked collagen membranes (DL group, n=6) or with a single-layer (SL group, n=5). Primary closure was not obtained. Cone-beam computed tomography images were taken immediately after the ARP procedure and after a healing period of 4 months before implant placement. Radiographic measurements were made of the width and height changes of the alveolar ridge. Results: All sites healed without any complications, and dental implants were placed at all operated sites with acceptable initial stability. The measurements showed that the reductions in width at the level 1 mm apical from the alveolar crest (including the bone graft) were $-1.7{\pm}0.5mm$ in the SL group and $-1.8{\pm}0.4mm$ in the DL group, and the horizontal changes in the other areas were also similar in the DL and SL groups. The reductions in height were also comparable between groups. Conclusions: Within the limitations of this study, single-layer and double-layer coverage with collagen membranes after ARP failed to show substantial differences in the preservation of horizontal or vertical dimensions or in clinical healing. Thus, both approaches seem to be suitable for open-healing ridge preservation procedures.

Double versus single cartridge of 4% articaine infiltration into the retro-molar area for lower third molar surgery

  • Sawang, Kamonpun;Chaiyasamut, Teeranut;Kiattavornchareon, Sirichai;Pairuchvej, Verasak;Bhattarai, Bishwa Prakash;Wongsirichat, Natthamet
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제17권2호
    • /
    • pp.121-127
    • /
    • 2017
  • Background: There are no studies regarding 4% articaine infiltration injection into the retro-molar area for an impacted lower third molar (LITM) surgery. This study aimed to evaluate the efficacy of infiltration using 1.7 ml (single cartridge: SC) of 4% articaine versus 3.4 ml (double cartridges: DC) of 4% articaine with 1:100,000 epinephrine in LITM surgery. Method: This study involved 30 healthy patients with symmetrical LITM. The patients were assigned to receive either a DC or SC of 4% articaine with 1:100,000 epinephrine as a local anesthetic for each operation. Onset, duration, profoundness, need for additional anesthetic administration, total volume of anesthetic used, vitality of the tooth, and pain score during operation were recorded. Results: The DC of 4 % articaine had a significantly higher success rate (83.3%) than did the SC (53.3%; P<0.05). The duration of soft tissue anesthesia was longer in the DC group. The intra-operative pain was higher in the SC group with a significant (P < 0.05) requirement for a supplementary local anesthetic. Conclusion: We concluded that using DC for the infiltration injection had a higher success rate, longer duration of anesthesia, less intra-operative pain, and a lower amount of additional anesthesia than SC in the surgical removal of LITM. We recommend that a DC of 4% articaine and a 1:100,000 epinephrine infiltration in the retro-molar region can be an alternative anesthetic for LITM surgery.

The double-barrier technique using platelet-rich fibrin for closure of oroantral fistulas

  • Jae-Woong Jung;Sung ok Hong;Eun-Jee Lee;Ra-Yeon Kim;Yu-Jin Jee
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제49권3호
    • /
    • pp.163-168
    • /
    • 2023
  • An oroantral fistula (OAF) or oroantral communication (OAC) is an opening between the oral cavity and the maxillary sinus. If left untreated, these openings may cause chronic maxillary sinusitis. Although small defects (diameter <5 mm) may close spontaneously, larger communications require surgical intervention. Various studies have been conducted on OAC closure using a platelet-rich fibrin (PRF) membrane; most of these prior studies have involved simple direct application of PRF clots. This study introduces a new "double-barrier technique" using PRF for closure of an OAF involving sinus mucosal lifting and closure. The PRF material is inserted into the prepared maxillary sinus space, and the buccal advancement flap covers the oral side. This technique was successfully used to treat two patients with chronic OAF in the posterior maxillary region after implant removal or tooth extraction. The use of a PRF membrane in a double-barrier technique may have advantages in soft-tissue healing and could enable easy closure of chronic OAF with minimal trauma.

Efficacy of intraosseous saline injection for pain management during surgical removal of impacted mandibular third molars: a randomized double-blinded clinical trial

  • Jawahar Babu. S;Naveen Kumar Jayakumar;Pearlcid Siroraj
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제23권3호
    • /
    • pp.163-171
    • /
    • 2023
  • Background: Surgical extraction of impacted mandibular third molars is the most common procedure performed by oral surgeons. The procedure cannot be performed effectively without achieving profound anesthesia. During this procedure, patients may feel pain during surgical bone removal (at the cancellous level) or during splitting and luxation of the tooth, despite administration of routine nerve blocks. Administration of intraosseous (IO) lignocaine injections during third molar surgeries to provide effective anesthesia for pain alleviation has been documented. However, whether the anesthetic effect of lignocaine is the only reason for pain alleviation when administered intraosseously remains unclear. This conundrum motivated us to assess the efficacy of IO normal saline versus lignocaine injections during surgical removal of impacted mandibular third molars. The aim of this study was to assess the efficacy of IO normal saline as a viable alternative or adjunct to lignocaine for alleviation of intraoperative pain during surgical removal of impacted mandibular third molars. Methods: This randomized, double-blind, interventional study included 160 patients who underwent surgical extraction of impacted mandibular third molars and experienced pain during surgical removal of the buccal bone or sectioning and luxation of the tooth. The participants were divided into two groups: the study group, which included patients who would receive IO saline injections, and the control group, which included patients who would receive IO lignocaine injections. Patients were asked to complete a visual analog pain scale (VAPS) at baseline and after receiving the IO injections. Results: Of the 160 patients included in this study, 80 received IO lignocaine (control group), whereas 80 received IO saline (study group) following randomization. The baseline VAPS score of the patients and controls was 5.71 ± 1.33 and 5.68 ± 1.21, respectively. The difference between the baseline VAPS scores of the two groups was not statistically significant (P > 0.05). The difference between the numbers of patients who experienced pain relief following administration of IO lignocaine (n=74) versus saline (n=69) was not statistically significant (P > 0.05). The difference between VAPS scores measured after IO injection in both groups was not statistically significant (P >0.05) (1.05 ± 1.20 for the control group vs. 1.72 ± 1.56 for the study group) Conclusion: The study demonstrates that IO injection of normal saline is as effective as lignocaine in alleviating pain during surgical removal of impacted mandibular third molars and can be used as an effective adjunct to conventional lignocaine injection.

재생근관치료의 성공에 영향을 미치는 결정 요인에 대한 후향적 연구 (A Retrospective Study of Critical Success Factors in Regenerative Endodontic Treatment)

  • 정화경;이난영;이상호
    • 대한소아치과학회지
    • /
    • 제44권1호
    • /
    • pp.47-55
    • /
    • 2017
  • 본 연구의 목적은 괴사된 미성숙 영구치의 재생근관치료 시 성공에 영향을 미치는 결정적 인자를 평가하고자 함에 있다. 미성숙 영구치의 치수괴사로 진단된 환자 중 재생근관치료를 시행하고 1년 이상 경과 관찰한 증례로서 46개 치아가 선택되었다. 이를 대상으로 성공률과 관련된 변수로서 나이, 성별, 초진 시 치근발육단계, 치수괴사 원인, 치료과정, 임상 및 방사선학적 결과를 조사하고 관련성을 통계 분석하였다. 분석 결과, 치근발육단계는 재생근관치료의 성공률에 영향을 미치지 않았으나, 치수괴사 원인은 치외치, 우식, 외상 순으로 성공률이 높았으며 유의한 차이가 있었다. 근관내 멸균 시 국소적 항생제를 적용했을 때 높은 성공률을 보이며 통계학적 유의차를 보였으며, double과 triple antibiotic paste간에는 유의차가 없었다. 재생근관치료의 성공률을 높이기 위해 치수 괴사 원인, 특히 외상 증례에 있어 신중한 적응증 판단이 선행되어야 하며, 적절한 항생제 적용이 필요하다.

과도한 치아마모를 보이는 환자에서 수직교합고경의 증가를 동반한 단일구조 지르코니아 보철물 전악수복 (Full mouth rehabilitation with vertical increase in patient with severe tooth wear using monolithic zirconia prosthetic restoration)

  • 방지원;김성아;임선영;이용상
    • 대한치과보철학회지
    • /
    • 제58권4호
    • /
    • pp.369-377
    • /
    • 2020
  • 점진적으로 진행되는 치아의 생리적인 마모는 정상적 현상이지만, 과도한 병적 마모는 기능장애와 교합평면의 부조화 및 심미성의 상실을 야기한다. 과도한 치아마모로 인해 구치부 지지의 상실 및 보철수복의 공간이 부족한 경우 수직교합고경 증가를 동반한 전악 수복이 고려될 수 있다. 본 증례는 잔존치의 과도한 치아마모와 기울어진 치은정점, 전치부 과개교합을 보이는 환자에서 교합거상을 통해 교합고경을 회복하였으며 부족한 구치부 보철 수복공간을 확보하고, 전치부 심미성과 교합관계를 개선할 수 있는 수직교합거상을 동반한 전악수복을 시행하였다. 체계적인 분석과 진단을 통해 임시보철물을 제작하여 충분한 적응기간을 거쳤으며, 이중 스캔방식을 통하여 단일구조 지르코니아 블럭을 사용해 최종보철물로 이행하여 기능적이고 심미적인 구강회복 결과를 얻었기에 이를 보고하고자 한다.

A comparison of different compressive forces on graft materials during alveolar ridge preservation

  • Cho, In-Woo;Park, Jung-Chul;Shin, Hyun-Seung
    • Journal of Periodontal and Implant Science
    • /
    • 제47권1호
    • /
    • pp.51-63
    • /
    • 2017
  • Purpose: Following tooth extraction, alveolar ridge preservation (ARP) can maintain the dimensions of ridge height and width. Although previous studies have demonstrated the effects of ARP, few if any studies have investigated the compressive force applied during grafting. The aim of this study was to determine the effects of different compressive forces on the graft materials during ARP. Methods: After tooth extraction, sockets were filled with deproteinized bovine bone mineral with 10% porcine collagen and covered by a resorbable collagen membrane in a double-layered fashion. The graft materials were compressed using a force of 5 N in the test group (n=12) and a force of 30 N in the control group (n=12). A hidden X suture was performed to secure the graft without primary closure. Cone-beam computed tomography (CBCT) was performed immediately after grafting and 4 months later, just before implant surgery. Tissue samples were retrieved using a trephine bur from the grafted sites during implant surgery for histologic and histomorphometric evaluations. Periotest values (PTVs) were measured to assess the initial stability of the dental implants. Results: Four patients dropped out from the control group and 20 patients finished the study. Both groups healed without any complications. The CBCT measurements showed that the ridge volume was comparably preserved vertically and horizontally in both groups (P>0.05). Histomorphometric analysis demonstrated that the ratio of new bone formation was significantly greater in the test group (P<0.05). The PTVs showed no significant differences between the 2 groups (P>0.05). Conclusions: The application of a greater compressive force on biomaterials during ARP significantly enhanced new bone formation while preserving the horizontal and vertical dimensions of the alveolar ridge. Further studies are required to identity the optimal compressive force for ARP.

Effect of hydrogel-based antibiotic intracanal medicaments on crown discoloration

  • Rayan B. Yaghmoor;Jeffrey A. Platt;Kenneth J. Spolnik;Tien Min Gabriel Chu;Ghaeth H. Yassen
    • Restorative Dentistry and Endodontics
    • /
    • 제46권4호
    • /
    • pp.52.1-52.11
    • /
    • 2021
  • Objectives: This study evaluated the effects of low and moderate concentrations of triple antibiotic paste (TAP) and double antibiotic paste (DAP) loaded into a hydrogel system on crown discoloration and explored whether application of an adhesive bonding agent prevented crown discoloration. Materials and Methods: Intact human molars (n = 160) were horizontally sectioned 1 mm apical to the cementoenamel junction. The crowns were randomized into 8 experimental groups (calcium hydroxide, Ca[OH]2; 1, 10, and 1,000 mg/mL TAP and DAP; and no medicament. The pulp chambers in half of the samples were coated with an adhesive bonding agent before receiving the intracanal medicament. Color changes (ΔE) were detected by spectrophotometry after 1 day, 1 week, and 4 weeks, and after 5,000 thermal cycles, with ΔE = 3.7 as a perceptible threshold. The 1-sample t-test was used to determine the significance of color changes relative to 3.7. Analysis of variance was used to evaluate the effects of treatment, adhesive, and time on color change, and the level of significance was p < 0.05. Results: Ca(OH)2 and 1 and 10 mg/mL DAP did not cause clinically perceivable tooth discoloration. Adhesive agent use significantly decreased tooth discoloration in the 1,000 mg/mL TAP group up to 4 weeks. However, adhesive use did not significantly improve coronal discoloration after thermocycling when 1,000 mg/mL TAP was used. Conclusions: Ca(OH)2 and 1 and 10 mg/mL DAP showed no clinical discoloration. Using an adhesive significantly improved coronal discoloration up to 4 weeks with 1,000 mg/mL TAP.

상악 전치부 과잉치 외과적 발거에 관한 임상적 연구 (CLINICAL STUDY OF MAXILLARY ANTERIOR SUPERNUMERARY TEETH)

  • 송우식;김인권;이상현;이완기
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제27권1호
    • /
    • pp.46-53
    • /
    • 2001
  • The prevalence of supernumerary teeth is between $1{\sim}3%$. Of these, $90{\sim}98%$ occur in the maxilla with particular predilection for the premaxilla, preceded by mandibular third premolars, mandibular forth molars and maxillary paramolars. The most common ones occur in the maxillary anterior region, they may occur singly between the central incisors(mesiodens), or they may be double(mesiodentes). Maxillary anterior supernumeraries may erupt into the oral cavity or remain unerupted. It is found that approximately 25% are erupted, while the rest are unerupted. They are usually a small tooth with a cone-shaped crown and a short root. They may cause delayed eruption, median diastema, bodily displacement or rotation of the adjacent permanent teeth. Occasionally they may lead to the developement of dentigerous cyst or primordial cyst, or eruption into nasal cavity. In this study, 109 supernumeraries surgically extracted from premaxilla in 84 patients are analysed. The results are as follows : 1. Sex distribution of male and female is 2.2 : 1. 2. Almost cases are in pediatric age from 5 to 12 years old (87%). 3. Problems with supernumeraries are tooth malpositon, diastema, delayed eruption, eruption to nasal cavity and cyst formation. 4. Of 109 supernumeraries, 16(15%) are erupted into oral cavity, 92(84%) are impacted, and 1(1%) is erupted into nasal cavity. 5. Of 84 patients, 59(70%) have one supernumeray while 25(30%) have two supernumeraries. 6. Of 109 supernumeraries, 96(88%) are found within the region of the central incisors. 7. Of 109 supernumeraries, 94(86%) are vertically impacted, 11(10%) are horizontally impacted, 3(3%) are labiopalatally impacted and 1(1%) is impacted in nasal cavity. 8. Of 84 patients, we used palatal flap in 67(80%), labial flap in 6(7%), both flaps in 4(5%) and no flap in 7(8%). And incisive nerve was cut in 33(49%) of 67 palatal flaps. 9. Extration with ostectomy was done in 72 supernumeraries(66%), without ostectomy in 37 teeth(34%). 10. Extraction with tooth sectioning was done in 21 supernumeraries(19%), without tooth sectioning was done in 88 teeth(81%). 11. We used local anesthesia in 70 patients(83%) and general anesthesia in 14 ones(17%).

  • PDF

치형 3차원 가공시스템 (3D Processing System of Tooth shape)

  • 김영수;김남오;민완기;신석두;강원찬;김영동
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 학술대회 논문집 전문대학교육위원
    • /
    • pp.120-123
    • /
    • 2003
  • Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts have been very important technique in scientific study and engineering, expecially for system design, manufacturing and inspection. Two camera method keeps accuracy more than double than mechanical method. In this paper, we describe the processes surface data of teeth for automatic processing, transformation that changes to coping data of possible numeric data form, and processed inlay teeth. As the result of the Inlay manufacture, which can process with high resolution, therefore we construct the automatic processing system that depends on manual.

  • PDF