• Wind and Structures
• /
• v.20 no.4
• /
• pp.549-564
• /
• 2015

The three-dimensional unsteady incompressible Reynolds-averaged Navier-Stokes equations and k-${\varepsilon}$ double equations turbulent model were used to investigate the effect on the measurements of anemometers due to a passing high-speed train. Sliding mesh technology in Fluent was utilized to treat the moving boundary problem. The high-speed train considered in this paper was with bogies and inter-carriage gaps. Combined with the results of the wind tunnel test in a published paper, the accuracy of the present numerical method was validated to be used for further study. In addition, the difference of slipstream between three-car and eight-car grouping models was analyzed, and a series of numerical simulations were carried out to study the influences of the anemometer heights, the train speeds, the crosswind speeds and the directions of the induced slipstream on the measurements of the anemometers. The results show that the influence factors of the train-induced slipstream are the passing head car and tail car. Using the three-car grouping model to analyze the train-induced flow is reasonable. The maxima of horizontal slipstream velocity tend to reduce as the height of the anemometer increases. With the train speed increasing, the relationship between $V_{train}$ and $V_{induced\;slipstream}$ can be expressed with linear increment. In the absence of natural wind conditions, from the head car arriving to the tail car leaving, the induced wind direction changes about $330^{\circ}$, while under the crosswind condition the wind direction fluctuates around $-90^{\circ}$. With the crosswind speed increasing, the peaks of $V_X,{\mid}V_{XY}-V_{wind}{\mid}$ of the head car and that of $V_X$ of the tail car tend to enlarge. Thus, when anemometers are installed along high-speed railways, it is important to study the effect on the measurements of anemometers due to the train-induced slipstream.

• Journal of architectural history
• /
• v.15 no.2
• /
• pp.95-114
• /
• 2006

This study was conducted on the premise that plan types of the public residential houses proposed after the 1945 implicatively showed the developing process of the modern housing. The formal characteristics created through the developing process were analyzed in Micro-Historically. Moreover, by providing a new viewpoint on the changes of the residential houses that occurred around 1945, we tried to provide the fundamental research background for the research on the developing processes of the future housing cultures. The research pursued mainly on the major spaces that became the modern change indices of housing plan changes from the traditional housings in 1940s to the modern housings such as the master bedrooms(An-Bang), kitchen, the main floored-space(Maru), and the secondary bedroom (Kune-Bang). The major experimental subjects are the 87 public residential plan types designed and supplied by the Korea Housing Cooperation in between 1945 and 1970. The study synthesized the developing process of the public residential houses from the traditional residential houses in 1940s through modern situation and intrusion of foreign housing cultures. Following results were derived from the study: First, various and experimental housing plan types had been proposed as public residential houses since 1945. Among them, the plan having the main floored-space(Maru) were the representative type of public residential houses and various series of houses were constructed based on this type. Second, the main floored-space(Maru) type had continued building connection order of the R-M-R that were used in the traditional houses. On the other hand, with decomposition of connecting ring between the main floored-space(Maru) and the kitchen, rationalization of women circulations and introduction of family-centered spaces had been resolved the demands of modern society. It had greate effect on settlement of the current double-row Maru plan type. Third, in Korea most of plan types for the public residential houses were proposed in between 1945 and 1965. Forth, the location of kitchen and relation between Maru and the master bedroom were arranged visually on the corner and center of the rear row with the micro change characteristics of the public residential houses. In this process, the front row was similar with traditional residential houses but the rear row was differentiated and developed with expansion of Maru and Ondol rooms, increase of closet spaces, and introduction of kitchen that divided spaces for sleeping and eating.

• Cartoon and Animation Studies
• /
• s.45
• /
• pp.417-434
• /
• 2016

The wall painting of Altamira cave "eight-legged wild boar" is often presented as a typical example of long-held desire of humanity for expressing movement. However, the eight legs are the product of so-called "double layer", of two paintings painted in different periods. Nonetheless, the explanation of Altamira cave paintings linking with the origin of animation is constantly reproduced without any particular doubt, verification or citation of sources. The fact of associating eight legs with movement is irrelevant to visual perception transcending time. This should be considered a movement expression code invented in a particular period of time. Sequential photography tried in the late 19th century, in particular, chronography of $\acute{E}tienne$-Jules Marey plays a crucial role in this. Marey's photography of which a series of sequence movements are overlapped in one frame and printed was reflected in painting works of artists including Duchamp and Balla in the early 20th century and formed as movement expression code. Animation manuals started to emerge from that period of time introduced the images of Marey's chronophotography as a way of analyzing and embodying the movement. In sum, the act of considering Altamira cave paintings of eight-legged wild boar as an expression of movement is an error intending to look at the past through today's visual code.

• Archives of Plastic Surgery
• /
• v.40 no.1
• /
• pp.36-43
• /
• 2013

Background Because there are numerous methods for reconstruction of the lower lip, it is not easy to choose the optimal method. In choosing the surgical method for lower lip reconstruction, we obtained acceptable outcomes based on our treatment strategy, which included either a barrel-shaped excision or the Webster modification of the Bernard operation. We report on the surgical outcomes based on our treatment strategy. Methods This study included 26 patients who underwent lower lip reconstructive surgery from September 1996 to September 2010. The operation was done using either a barrel-shaped excision or the Webster modification, considering the location of the defect, the size of the defect, and the amount of residual tissue on the lateral side of the vermilion after excision. Results In our series, 3 patients underwent a single barrel-shaped excision, and nine patients underwent a double barrel-shaped excision. In addition, the unilateral Webster modification was performed on in 6 patients, and there were eight cases of bilateral Webster modification. All of the patients except one were satisfied with the postoperative shape of the lip. In one case both recurrence and dehiscence occurred. One patient had a good postoperative lip shape, but had difficulty wearing a denture, and also underwent commissuroplasty. Furthermore, there were two patients who complained of drooling, and 4 with paresthesia. Conclusions A soft tissue defect resulting from wide excision of a lower lip malignancy can be successfully reconstructed using only one of two surgical methods: the barrel-shaped excision or the Webster modification of the Bernard operation.

• Journal of Chest Surgery
• /
• v.19 no.4
• /
• pp.569-577
• /
• 1986

Between October 1979 and June 1986, modified Fontan procedures have been performed on 22 patients by the Department of Thoracic and Cardiovascular Surgery, Yonsei University College of Medicine. Twelve patients had tricuspid atresia; one, congenital tricuspid stenosis; five, single ventricle; two, I-transposition of the great vessels; one, double outlet right ventricle, and one, pulmonary atresia with an intact ventricular septum. There were 9 operative deaths [mortality; 40.9%]. The causes of death were right heart failure in six patients and pulmonary venous hypertension in one who misdiagnosed preoperatively. Another two were deceased due to sepsis and cerebrovascular accident at postoperative 35 and 34 days in each. There were 7 patients below 4 years of age at the time of operation and among them 4 patients were deceased. The operative death was not related with patients` age above and below 4[p=0.211]. The relation between operative death of tricuspid anomaly and another cardiac malformations was statistically significant [p=0.048]. The operative procedures with or without valved conduit [woven dacron] was related significantly [p=0.043] in the case of the 21 of the patients, but the modified Fontan operation with a valved conduit was performed early stage in this series. Since 1982, we operated on 4 patients, doing a right atrium-right ventricle anastomosis without a conduit. All survived and remained in functional class I [NYHA]. The right atrial pressure [RAP] was elevated significantly after operation [mean 9.9$\pm$4.8 ~16.9$\pm$3.6 mmHg, p<0.001]. The relation between the postoperative RAP of the survival group [16.5$\pm$4.3 mmHg] and the group who died [17.4$\pm$2.2 mmHg] was statistically significant [p=0.047]. There was no relation between any operative death and any previous palliation. All patients were followed for 4 months to 80 months, except one who was lost to follow up at 2 months following surgery [mean 11.4 months, 238 patient. months]. All were in functional class I with 5 on medications and 7 not. One was reoperated at 70 months following the first operation, due to conduit stenosis. She was moderately impaired in activity, with hepatomegaly after the second operation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.1
• /
• pp.75-81
• /
• 2011

Supernumerary teeth are in excess of the normal number of teeth in either the primary or permanent dentitions. They are classified into supplemental teeth resembling those of the normal series and rudimentary teeth with abnormal shapes, according to their form. Most of the supernumerary teeth are rudimentary form, and supplemental teeth are much less common. Sulppemental teeth are most common in the permanent maxillary lateral incisor area and clinicians should be careful with differential diagnosis from normal teeth. Unerupted supernumerary teeth may produce several complications such as delayed eruption, displacement of permanent teeth, diastema, root resorption and cyst formation. Early detection and proper treatment plan according to the tooth alignment and root formation stage are important. Here we report 3 cases of unilateral or bilateral normal incisor shaped supernumerary lateral incisors treated by eruption observation, surgical extraction and orthodontic treatment with resin build-up.

• Publications of The Korean Astronomical Society
• /
• v.27 no.5
• /
• pp.399-409
• /
• 2012

As a part of the short-period variability survey (SPVS) at Bohyunsan Optical Astronomy Observatory, we obtained time-series BV CCD images in the region of Cyg OB3 association centered on the open cluster NGC 6871. The observations were performed for 18 nights from September 5, 2008 to September 1, 2009. We found 15 short-period variable stars in the region. They are ${\delta}$ Scuti type stars belonging to the local spiral arm, Orion spur. Among them, only two stars were previously known, and the rest are newly discovered ones. In this paper, we have performed a multiple-frequency analysis to determine frequencies of the 15 ${\delta}$ Scuti type stars, using the discrete Fourier transform and linear least-square fitting methods. One of the newly discovered variable stars is a double-mode ${\delta}$ Scuti type star with the fundamental and the first overtone modes, and two are high amplitude ${\delta}$ Scuti stars.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.270-278
• /
• 2020

In this paper, sound transmission of Micro-Perforated Plates (MPPs) installed in an impedance tube with a circular cross-section is described using an analytic method. Vibration of the plates is expressed in terms of an infinite series of modal functions, where modal function in the radial direction is given by the Bessel function. Under the plane wave assumption, a low frequency approximation is derived, and a formula for the sound transmission coefficient of multi-layered MPPs is presented using the transfer matrix method. The Sound Transmission Losses (STLs) of single and double MPPs are computed using the proposed method and compared with those done by the Finite Element Method (FEM), which shows an excellent agreement. As the perforation increases, the STL is degraded, since the STL becomes dominated by the perforation ratio rather than by vibration of the plate. The STL shows dips at natural frequencies as well as at the mass-spring-mass resonance frequency. The proposed model for the STL prediction in this study can be applied to an arbitrary number of MPPs, where each MPP may or may not have a perforation.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.11
• /
• pp.5-15
• /
• 2011

This paper presents two analysis methods for characterizing the non-linear finite strain consolidation behavior of highly deformable dredged soil deposits along with the fundamental parameters obtained in the companion paper; that is, the zero effective stress void ratio, the non-linear relationships of void ratio-effective stress and void ratio-hydraulic conductivity. The simplified Morris's analytical solution (2002) and the widely recognized numerical program, PSDDF (primary Consolidation, Secondary Compression, and Desiccation of Dredged Fill) for both single and double drainage conditions are adopted in this paper to verify a series of laboratory experiments for self-weight consolidation of the Incheon clay and Kaolinite. The comparisons show that the analysis methods proposed herein can properly simulate the long-term non-linear finite strain consolidation behavior for dredged soils in the field. In addition, a case study for the artificial Craney Island has been conducted to illustrate the importance of obtaining appropriate non-linear finite strain consolidation parameters and the applicability of PSDDF in promoting dredged soil disposal.

• Journal of Navigation and Port Research
• /
• v.33 no.1
• /
• pp.27-33
• /
• 2009

Estimation of the buckling and ultimate strength of a continuous stiffened plate subjected to combined transverse compression and lateral pressure is of high importance to ensure the safety of ship structures, particularly for the bottom plating under a deep draft condition For example, bottom plating of bulk carriers is subjected to transverse thrust caused by the bending of double bottom structure and the direct action of pressure on the side shells. Most of experimental tests, theoretical approach and numerical researches have been performed on the buckling and ultimate strength behaviour of plates or stiffened plates under combined compression and lateral pressure. With regard to stiffened panels, however, most of studies have been concerned with the load conditions of combined longitudinal thrust and lateral pressure, while fewer studies have been performed for the combined transverse thrust and lateral pressure. In addition, the previous researches are mainly concerned with an isolated rectangular plate simply supported along the all edges, whereas actual ship plating is continuous across the transverse frames and heavy girders. In the present paper, a series of elastoplastic large deflection FEA on a continuous stiffened plate is performed and then clarify the characteristic of collapse mode and explain the effect of transverse compression.