• Journal of Fashion Business
• /
• v.1 no.2
• /
• pp.46-54
• /
• 1997

The purpose of this study is to understand women's wear manufacturing industries. First, the study was to investigate the present production systems and how much the automatic facility are by comparing them. This study enhanced more efficient, stable, and suitable work line. This intern will direct the way in which automatic facilities will be created. Second, through this study on the general character of the inspectors, the ratio of impaired goods, and the reasons for unsatisfactory goods, I intended to find out a way to decrease the impaired goods and to produce competitive and high quality goods. The results of the survey can be summarized as follows; 1. The result of the research on the automatic industrial facilities shows that the majority of the factories (77.4%) are 40% below the automatic facility rate. The reasons for this according to order are that was a deficit in money, no reason for expensive machines, and lack of the technique and the number of workers required to handle the machines. 2. At this time, the most required equipments are shown according to its importance; automatic sewing machine, automatic cutting machine, automatic spreading machine, and finishing & pressing machine. So in the women's wear manufacturing industries, they think that they need more automatic cutting machine, automatic spreading machine in the cutting field rather than high price automatic machine in the sewing field such as pattern former, pocket welting, automatic sleeve connecting machine and automatic label connecting machine. 3. The result of the research in the goods quality shows that the average impaired rate is 12.7% at the first inspection. In addition the average rate for complete impaired rate is 1.52%. The line system shows that it has a impaired rate that is double the rate of the pair system. Because of this, the industries plan to combine the line system and pair system to create an improved and suitable production system which can boost the quality and productivity of the goods. 4. The fabric is the main point of the impaired goods. The factors of the impaired goods in manufacturing are the lack of mental abilities of the worker, impaired fabrics and a lack of cooperation in the working system. Furthermore, there is a lack of technique for new material. 5. To prohibit impaired goods in manufacturing, there need to be a way to educate the workers and to enhance the workers' mind on the productive goods. Also there need to increase in the investments of automatic production machines. Finally there need to be a standardized working line. Therefore, there need to be an improvement on the management of the production of goods, the development of technique and an increase in the education for the workers, with this there will be a decrease in impaired goods, and an increase in better quality of goods to enforce the domestic apparel industries.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.5
• /
• pp.443-450
• /
• 2009

Purpose: Conventional image reconstruction uses simplified physical models of projection. However, real physics, for example 3D reconstruction, takes too long time to process all the data in clinic and is unable in a common reconstruction machine because of the large memory for complex physical models. We suggest the realistic distributed memory model of fast-reconstruction using parallel processing on personal computers to enable large-scale technologies. Materials and Methods: The preliminary tests for the possibility on virtual manchines and various performance test on commercial super computer, Tachyon were performed. Expectation maximization algorithm with common 2D projection and realistic 3D line of response were tested. Since the process time was getting slower (max 6 times) after a certain iteration, optimization for compiler was performed to maximize the efficiency of parallelization. Results: Parallel processing of a program on multiple computers was available on Linux with MPICH and NFS. We verified that differences between parallel processed image and single processed image at the same iterations were under the significant digits of floating point number, about 6 bit. Double processors showed good efficiency (1.96 times) of parallel computing. Delay phenomenon was solved by vectorization method using SSE. Conclusion: Through the study, realistic parallel computing system in clinic was established to be able to reconstruct by plenty of memory using the realistic physical models which was impossible to simplify.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.24 no.1
• /
• pp.31-43
• /
• 1982

Engineering phase of dairy housing systems has close connection with the milk produc- tivity of dairy cattle, the quality of milk, extension of dairy production systems, labor- saving in management of dairy cattle and the like. Moreover, the rate of investment of dairy housing facilities is of relatively high level, However, there has been almost no research effort for the improvement of engineering aspects of dairy housing systems in Korea. The purpose of this study is to find out general engineering problems and to recomm- end the improvement in dairy housing systems in Korea. Field survey by means of questionaire, direct measurements, taking pictures and sketching was conducted to get necessary information for the study. Kyung-ki Do region was firstly chosen for sampling area since it has included more than half of the number of dairy farms of the whole country. The results obtained are summarized as follows: 1. In overall dairy farm layout, the dwellings of workers were ignored in the light of sanitary environment 2. The layout of stalls in a dairy barn belongs mostly to the type of double-row face-out, which is compatible with the emphasis of manure disposal activities. 3. While the width and length of stalls were sufficiently close to the standard dimension, the width of mangers was much less than the standard dimension. 4. The width and depth of manure gutters and the width of working alleys were much. less than the standard dimension. 5. The mooring equipment was mostly in the classes of chain or rope. The watering equipment was not facilitated independantly except the one cese of using watercup. 6. The bucket milkers with one or two bucket milkers with the capacity of two cattles. each were used as milking equipment in most dairy farms. 7. There were only few milk rooms independently spaced from other space, in which the arrangement of milking equipment was much less than the standard condition. 8. The lounging ground area was averaged to be sufficient for the activity of dairy herd. 9. Silos for silage used during winter consisted of mostly bunker silos, trench silos and underground vertical silos. Ordinary vertical silos were considered for the farmers to be inconvenient for the labor saving. 10. From the view point of heat conservation and moisture removal within the dairy barns, windows were not flexible for the easy ventilation and ceiling part was not adequate for temperatur maintenance. 11. Waste treatment and disposal systems were not provided with most dairy farms, therefore the livestock waste pollution problems would be serious in the near future.

• Korean Journal of Materials Research
• /
• v.18 no.6
• /
• pp.339-346
• /
• 2008

Single-crystal $ZnIn_2S_4$ layers were grown on a thoroughly etched semi-insulating GaAs (100) substrate at $450^{\circ}C$ with a hot wall epitaxy (HWE) system by evaporating a $ZnIn_2S_4$ source at $610^{\circ}C$. The crystalline structures of the single-crystal thin films were investigated via the photoluminescence (PL) and Double-crystal X-ray rocking curve (DCRC). The temperature dependence of the energy band gap of the $ZnIn_2S_4$ obtained from the absorption spectra was well described by Varshni's relationship, $E_g(T)=2.9514\;eV-(7.24{\times}10^{-4}\;eV/K)T2/(T＋489K)$. After the as-grown $ZnIn_2S_4$ single-crystal thin films was annealed in Zn-, S-, and In-atmospheres, the origin-of-point defects of the $ZnIn_2S_4$ single-crystal thin films were investigated via the photoluminescence (PL) at 10 K. The native defects of $V_{Zn}$, $V_S$, $Zn_{int}$, and $S_{int}$ obtained from the PL measurements were classified as donor or acceptor types. Additionally, it was concluded that a heat treatment in an S-atmosphere converted $ZnIn_2S_4$ single crystal thin films into optical p-type films. Moreover, it was confirmed that In in $ZnIn_2S_4$/GaAs did not form a native defects, as In in $ZnIn_2S_4$ single-crystal thin films existed in the form of stable bonds.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.1
• /
• pp.111-137
• /
• 1991

Although a number of studies have been performed to assure that residual stress caused by a mismatch of alloy porcelain thermal expansion can contribute to clinical failure of a ceramometal restoratoin, the interactive influence of cooling rate on the magnitude of thermal expansion difference and on bond strength between them have not been extensively analyzed. The objective of this study was to determine the influence of cooling rate and the number of firing cycles on the expansion mismatch and the flexural failure resistance of metal porcelain strip. Tested alloys included one Pd-Ag alloy, one Ni-Cr-Be alloy with two kinds of porcelain, Vita and Ceramco. Metal specimens were cast into rods with a height of 13mm and a diameter of 5mm. Subsequently, the castings were subjected to scheduled firing cycles without porcelain. And the porcelain specimens after being fired were trimmed into a bar with a final dimension of 5 x 5 x 25mm. Thermal expansions of the alloys and porcelains were measured by using a push rod or a differential dialometer respectively. Porcelain glass transition temperatures and expansion values were derived alloy- porcelain pairs were assessed by comparing expansion values of the components at a porcelain glass transition temperature. Calculations were made using combinations of a Ni-Cr alloy or Pd-Ag alloy with each of two porcelain products. Metal- porcelain strip specimens were subjected to four point loading in an Instron testing machine until crack occured at the metal-cramic interface at the time of sharp decrease of load on recorder. On the basis of this study, the following conclusions may be stated : 1. Regardless of the kinds of ceramometal combinations, both of calculated and experimental data revealed that the double fired specimens exhibited a significantly lower flexural strength. 2. By the rise of the amount of mismatch, bond strength were decreased. 3. Thermal expansion value of Pd-Ag alloys were higher than of Ni-Cr alloys. 4. Expansion curves of metal were proportional to the increase of temperature and were not affected by the experimental conditions, however porcelains did not show the same magnitude of metal, and a shift of the glass transition temperature to higher temperatures was observed when cooled rapidly. 5. Alloy- porcelain thermal compatibility appeared more dependent on the porcelain than the alloy.

• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.267-276
• /
• 2015

Several analyses on tritium that is the largest release of gas or liquid radioactive waste from domestic PWR and PHWR NPPs were carried out, such as release comparison, directional frequency of wind and tritium behavior changes in environmental samples. First of all, analysis result showed that tritium released from PHWR was more than ten times as gas and double to three times as liquid in comparison to PWR in 2013. Independent release management in NPP units is needed to precisely control and analyze tritium, since there were 2 units of some NPPs having the same amount of release during analysis. In analysis on frequency of wind direction, average range showed 1.7 to 11.5% by 16-point compass. In case of analysis on sampling points by wind direction, Result showed most of the sampling points are right in places. However, There are some areas needed to examine. In analysis on tritium concentration changes in environmental samples, tritium concentration near NPPs was higher than one far away from NPPs. In case of environmental samples far from PWR, a trace of tritium occur. While, tritium concentration near NPPs was more than or equal to one further from PHWR. In conclusion, tritium occurs considerably in PHWR and is lower than standard in samples. but, it is still detected. Therefore, it is needed to strengthen control in system in NPPs and to consistently monitor tritium in environment.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.81-86
• /
• 2003

In the paper, the power amplifier using active biasing for LDMOS MRF-21060 is designed and fabricated. Driving amplifier using AH1 and parallel power amplifier AH11 is made to drive the LDMOS MRF 21060 power amplifier. The variation of current consumption in the fabricated 5 Watt power amplifier has an excellent characteristics of less than 0.1A, whereas passive biasing circuit dissipate more than 0.5A. The implemented power amplifier has the gain over 12 dB, the gain flatness of less than $\pm$0.09dB and input and output return loss of less than -19dB over the frequency range 2.11~2.17GHz. The DC operation point of this power amplifier at temperature variation from $0^{\circ}C$ to $60^{\circ}C$ is fixed by active circuit.

• The Journal of Fisheries Business Administration
• /
• v.30 no.1
• /
• pp.119-147
• /
• 1999

This article is subject to the rationalization of the cold-storage warehouse management, which gives the stabilization of the fishery production and the food life with respect to fisheries industry. In this point of view, the article examines to the structure of the cold-storage warehouse industry from the perspective of the industrial organization. To put it concretely, the article intends to apprehend the state of the structure of the industry and analyze the cold-storage warehouse's management activities. In addition, I try to find know the factors that affect the management performance(profitablity) of the industry through the cross-sectional correlation analysis. Finally, the conclusion of the article can be described as follows : \circled1 On the basis of the cold-storage capacity, there is the tendency that the industry concentrate in the area of Pusan(41.7%). \circled2 By formulating step of development of the industry, it is divided by six types. Type I is designed as raw material-storage warehouse for self-processing. Type IIis the raw material-storage warehouse for self-processing and storage-sale warehouse. Type III is the raw material-storage warehouse for self.distribution. Type IV is the raw material-storage warehouse for self-distribution and storage-sale warehouse. Type V is the net storage-sale warehouse. Type Ⅵ is the physical distribution center warehouse. Although each region has one representative type,6 types exist in all regions. \circled3 The competition structure of the industry has double structure on the basis of cold-storage capacity. \circled4 With respect to the management activity of the cold-storage warehouse, there is no change or even a decrease not increasing or not any change in sales from 1996 to 1997 \circled5 In order to try to induce the amount of shipper's materials, services that a cold-storage warehouse supply with its users include a custody-fee discount, a distribution-process service, a finance service, quality management service and so on. One of the best attractive services is the custody-fee service. \circled6 In the structure and management activity of the industry, the factors that affect management performance (profitablity) are a custody-fee discount, sales ability and capital structure of individual firm. Positive factor is sales ability and capital structure of individual firm. But, The custody-fee discount turns out to be a negative capital structure of individual film.

• Journal of Haehwa Medicine
• /
• v.18 no.1
• /
• pp.19-28
• /
• 2009

Objectives: This study was conducted to help clinical studies for treating Functional Dyspepsia with acupuncture. We inspected tendency of studies of acupuncture treatment for functional dyspepsia and analyzed the assessing instrument for it by scrutinizing Pubmed recent publications. Materials and Methods: We inspected 8 theses and scrutinized their objectives, periods, participants, materials and methods, the instrument of assessment for the studies, and criteria and symptom score for questionaire, results and JADAD score. Results: 1. Most studies were published by oriental doctors except one which was published by an American doctor. More and more studies are being published in America and written in English recently. So it is considered that western doctors think that the acupuncture treatment is useful as unorthodox medicine for functional dyspepsia. 2. Among the 4 clinical studies, 2 studies were RCT and 1 study was not RCT and 1 study with vagueness. All 4 clinical studies were not double-blinded because they were about comparison between acupuncture treatment and medicine. 3. ST36, PC6, CV12, BL21 were chiefly used, and auricular point, ST40, SP6 were also used. Manual acupuncture were used in 2 studies, and low frequency pulse and electroacupuncture were used in other studies respectively. 4. 4 clinical studies used 0~3 points symptom score as the instrument of assessment. Additional assessments were on gastric emptying time, EGG and plasma level of motilin. All thesis were not verified of validity and reliability. 5. Among the 4 reviewed thesis, 2 theses were about acupuncture as one of the various treatment of functional dyspepsia, and the other 2 theses were about efficacy of acupuncture treatment. And the result generally showed effectivity of acupuncture treatment. Conclusion: Acupuncture treatment for functional dyspepsia is considered useful as in unorthodox medicine by western doctors, and it is necessary to provide objective instrument for assessing acupuncture treatment for functional dyspepsia.

• Journal of architectural history
• /
• v.3 no.1
• /
• pp.57-82
• /
• 1994

This paper is the result of the researches and the field surveys of the villages and the dwellings of Korean immigrants in Yien-Pien area, north-eastern China. This study aims to persue both of the origin and the process of development of their settlements and dwelling types from late 19C to the present. Their processes are too complex to analysis by single view-point. I have eyes to interprete them from three pionts; 1)correspondences between the dwelling types and the econo-political history of their region, 2)cultural assimilation with the native dwelling types, and 3)the direction of their modernization with the economical development of modern China. Three village types have been pioneered; 1)the villages of indivisual immigration, 2)the villages of planned group immigration, and 3)the villages of socilistic reform villages of 1) were composed of organic village patterns and various shaped dwelling lots on the sloped site; villages both of 2) and 3), gird patterns and uniformed lots on open fields. Historically, villages of 1) were pioneered before 1931; villages of 2), 1936-1945; villages of 3), from 1945. Each of dwelling types had strong relations with the village types to which it belonged. Before 1931, dwellings were built up based on so called "Ham-buk dwelling type" which was dominent in north-eastern Korea. In the era of gruop-immigration, various dwelling types were flew into Yen-Pien from southern Korea. In modern China, their southern types were changed into Yen-Pien type as similar as Ham-book type. After 1945, with the Great leap Forward and the Cultural Revolution, as communization of indivisual properties and reorganization of rural communities, each of dwellings became smaller and simpler in aspects of scales as well as functions. There are two types in Yen-Pien dwellings, those are 'single-file' and 'double-file' type. Three sub-types of latter arc 'six-bays', 'eight-bays', and rarely 'ten-bays'. The most common element of all types is Chong-ju-k'an; which is large room with heated floor, openig to kitchen. Now, modern dwellings of Korean immigrants are changing their spatial compositions, materials, and structures. With cultural assimilation as well as modernization, especially in urban areas, they are compelled to accept the elements of Chinese dwellings. But the spatial element of "Chong-ju-k'an", which is the core element of Yen-Pien dwelling type, never fade away nor is changed.