• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.39-42
• /
• 2009

The aerodynamic characteristics of aircraft winglet with structural deformation was investigated using the static FSI(Fluid-Structure Interaction) system. The system, comprised of CAD, CFD, CSD, VSI, and grid regeneration modules, was constructed. In the process VSI, grid regeneration, and integration modules were developed to combine CSD and CFD modules. As a test model, KC-135A, the double winglet suggested by Whitcomb, was selected and its aerodynamic characteristics for the rigid and deformable models was calculated by applying the static FSI system. As a result, the lift and drag coefficients of test models were reduced to 11% and 1.3%, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.7
• /
• pp.976-983
• /
• 2018

Increasing demand in developing countries for animal sources of food including red meat is predicted to double by 2050. In Indonesia, there has always been a gap between supply and demand of beef with national beef production only satisfying about 45% of demand. This paper aims to describe the current features and prospects for beef production systems in Indonesia. The first part of the article reviews and analyses Indonesian beef cattle production systems. The second part addresses issues related to the current systems for beef production that could become important for future development of the beef industry in Indonesia. Recommendations to improve breeding and reproduction, to empower smallholder farmers, to improve the capacity of industry-related institutions to enhance technology transfer, and to develop systems for industry development such as integration of palm oil or plantations with beef cattle production are briefly discussed.

• ETRI Journal
• /
• v.30 no.6
• /
• pp.783-789
• /
• 2008

A bio-inspired vision chip for edge detection was fabricated using 0.35 ${\mu}m$ double-poly four-metal complementary metal-oxide-semiconductor technology. It mimics the edge detection mechanism of a biological retina. This type of vision chip offer several advantages including compact size, high speed, and dense system integration. Low resolution and relatively high power consumption are common limitations of these chips because of their complex circuit structure. We have tried to overcome these problems by rearranging and simplifying their circuits. A vision chip of $160{\times}120$ pixels has been fabricated in $5{\times}5\;mm^2$ silicon die. It shows less than 10 mW of power consumption.

• Journal of applied mathematics & informatics
• /
• v.8 no.1
• /
• pp.165-180
• /
• 2001

This paper presents a new difference scheme for numerical solution of stiff system of ODE’s. The present study is mainly motivated to develop an absolutely stable numerical method with a high order of approximation. In this work a double implicit A-stable difference scheme with the sixth order of approximation is suggested. Another purpose of this study is to introduce automatic choice of the integration step size of the difference scheme which is derived from the proposed scheme and the one step scheme of the fourth order of approximation. The algorithm was tested by means of solving the Kreiss problem and a chemical kinetics problem. The behavior of the gas explosive mixture (H₂+ O₂) in a closed space with a mobile piston is considered in test problem 2. It is our conclusion that a hydrogen-operated engine will permit to decrease the emitted levels of hazardous atmospheric pollutants.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.228-233
• /
• 2000

It is common to apply the technology of FPGA (Fie이 Programmable Gate Array) which is one of the design methods for ASIC(Application Specific IC)to the active components used in the data processing at the digital system of satellite aircraft missile etc for compact lightness and integration of Printed Circuit Board (PCB) In carrying out the digital data processing the FPGAs are designed for the various functions of the Process Control Interrupt Control Clock Generation Error Detection and Correction (EDAC) as the individual module. In this paper an FPGA chip for Single Error Correction and Double Error Detection (SEC-DED) for EDAC is designed and simulated by using a VLSI design software LODECAP.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.2
• /
• pp.27-33
• /
• 2003

본 논문에서는 측정된 가속도신호만을 사용하여 변위응답을 추정하는 시간영역과 주파수영역에서의 동적 응답변환 알고리즘을 제시하였다. 본 알고리즘에서 사용되는 변환변위응답은 속도와 변위성분의 초기조건에 대한 정보 없이 측정된 가속도신호의 적분에 의하여 계산되며 실제 변위응답과 상관관계를 갖는다. 이에 측정된 구조물의 동적응답이 무재하부분과 자유진동부분을 포함하고 있을 때 변환응답을 보정하여 초기치 문제를 해결할 수 방법을 제시함으로써 가속도신호만을 사용하여 실제 변위응답을 추정할 수 있도록 하였다. 제시된 응답변환 알고리즘의 타당성을 평가하기위해 실교량에 대한 현장시험자료를 적용하여 변위응답을 추정하고 실측된 동적 변위와 비교하였다. 또한, 주파수영역에서의 응답변환에서 적분구간을 상이하게 사용함으로써 동적성분과 정적성분으로 분리된 추정응답을 평가할 수 있었으며 이에 따른 충격계수의 계산은 신뢰성 있는 평가방법임을 확인하였다.

• The Journal of Korea Robotics Society
• /
• v.5 no.4
• /
• pp.279-285
• /
• 2010

This paper presents the use of 3 axis accelerometer for getting the gait information including the number of gaits, stride and walking distance. Travel distance is usually calculated from the double integration of the accelerometer output with respect to time; however, the accumulated errors due to the drift are inevitable. The orientation change of the accelerometer also causes error because the gravity is added to the measured acceleration. Unless three axis orientations are completely identified, the accelerometer alone does not provide correct acceleration for estimating the travel distance. We proposed a way of minimizing the error due to the change of the orientation. Pedestrian localization is implemented with the heading angle and the travel distance. Heading angle is estimated from the rate gyro and the magnetic compass measurements. The performance of the localization is presented with experimental data.

• Computers and Concrete
• /
• v.18 no.5
• /
• pp.1019-1039
• /
• 2016

In this paper, a parallel algorithm of nonlinear dynamic analysis of three-dimensional (3D) reinforced concrete (RC) frame structures based on the platform of graphics processing unit (GPU) is proposed. Time integration is performed using Newmark method for nonlinear implicit dynamic analysis and parallelization strategies are presented. Correspondingly, a parallel Preconditioned Conjugate Gradients (PCG) solver on GPU is introduced for repeating solution of the equilibrium equations for each time step. The RC frames were simulated using fiber beam model to capture nonlinear behaviors of concrete and reinforcing bars. The parallel finite element program is developed utilizing Compute Unified Device Architecture (CUDA). The accuracy of the GPU-based parallel program including single precision and double precision was verified in comparison with ABAQUS. The numerical results demonstrated that the proposed algorithm can take full advantage of the parallel architecture of the GPU, and achieve the goal of speeding up the computation compared with CPU.

• ETRI Journal
• /
• v.25 no.4
• /
• pp.270-273
• /
• 2003

This paper presents a simple process to integrate thin-film inductors with a bottom NiFe magnetic core. NiFe thin films with a thickness of 2 to 3${\mu}m$ were deposited by sputtering. A polyimide buffer layer and shadow mask were used to relax the stress of the NiFe films. The fabricated double spiral thin-film inductor showed an inductance of 0.49${\mu}H$ and a Q factor of 4.8 at 8 MHz. The DC-DC converter with the monolithically integrated thin-film inductor showed comparable performances to those with sandwiched magnetic layers. We simplified the integration process by eliminating the planarization process for the top magnetic core. The efficiency of the DC-DC converter with the monolithic thin-film inductor was 72% when the input voltage and output voltage were 3.5 V and 6 V, respectively, at an operating frequency of 8 MHz.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.96-100
• /
• 2003

In the tensile loading of sheet metals made from polycrystalline aluminum alloys, a single deformation band appears inclined to the elongation axis in the early stage of plastic deformation, and symmetric double bands are observed in the later stage. This character of the localized deformation bands has been analyzed by a perturbation method. Macroscopic slip modes composed of slip planes and slip directions were assumed to describe the tensile and shear strains. Along time integration path, the value of the perturbation growth parameter was checked to find at which angle to the elongation axis the localized deformation bands are generated. It was shown that the mode of the localized deformation is related to asymmetry of material property.