• 한국분무공학회지
• /
• 제2권2호
• /
• pp.16-23
• /
• 1997

In this research a novel two-reference-beam double pulse holographic technique for the measurments of particle sizes and velocities was developed. This holographic method features the capability of separation of the first and second particle images by using two reference beams instead of one and the change of the polarization direction of laser light. The developed holographic system was tested through the measurements of droplet sizes and velocities in the spray created by two high speed impinging jets. The overall spray pattern clearly revealed the inherent wave nature. Smaller and faster droplets were generated with larger impingement angle, higher jet velocity. and smaller orifice diameter.

• 한국태양에너지학회 논문집
• /
• 제26권1호
• /
• pp.57-64
• /
• 2006

Cr-CrO cermet solar selective coatings with a double cermets layer film structure were prepared using a special direct current (dc) magnetron sputtering technology. The typical films structures from surface to bottom substrate were measured to be an $Al_2O_3$ anti-reflection layer on a double Cr-CrO cermet layer on an Al metal infrared reflection layer. Optical properties of optimized Cr-CrO cermet solar selective coating were absorptance (${\alpha}$) = 0.95 and emittance (${\varepsilon}$) = 0.10 ($100^{\circ}C$). Atomic force microscopy (AFM) image showed that Cr-CrO cermet film was very smooth and their grain size was also very small The results of thermal stability test showed that the Cr-CrO cermet solar selective coatings were stable for use at temperature of $400^{\circ}C$.

• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.864-872
• /
• 1992

본 연구에서는 이중노출 홀로그래피 간섭계의 원리를 이용하여 임의의 2차원 적 변형에 있어서 면외 변위와 면변위(in-plane displacement) 각각에 대한 홀로그램 을 제작하고 이를 컴퓨터에 입력하여 간섭무늬를 해석함으로써 변위와 변형률의 정량 화를 시도하였다.

• 한국통신학회논문지
• /
• 제35권5A호
• /
• pp.482-489
• /
• 2010

본 논문에서는 RF PPF(Poly Phase Filter)를 이용하는 이미지 제거회로에서 광대역의 모든 RF 신호를 한꺼번에 Quadrature 신호로 변환시키는 기존 구조와 다르게 광대역의 RF 신호를 여러 개의 협대역(Narrow band)으로 세분화시켜 Quadrature 신호로 변환시키는 새로운 구조의 주파수 가변형 협대역 DQ-IRM(Double-Quadrature Image Rejection Mixer) 구조를 제안하였다. 기저대역에서 선택한 채널과 그 인접 2-3개 채널이 포함된 협대역 RF 신호만을 선택적으로 Quadrature 신호로 변환시키는 이 구조는 RF PPF의 차수를 줄일 수 있기 때문에 낮은 경로손실 특성과 높은 이미지제거 성능을 동시에 구현이 가능하다. 제안한 DQ-IRM를 이용하여 지상파 디지털멀티미디어방송(Terrestrial Digital Multimedia Broadcasting, T-DMB) 수신용 CMOS RF 튜너 칩을 설계하고 그 성능을 검증하였다. 설계된 CMOS RF 튜너 칩은 CMOS 0.18 um 테크놀로지를 이용하였으며, 170-240 MHz 주파수대역에서 약 1.26 dB의 잡음특성과 약 51 dB 이상의 이미지제거 성능을 얻었다. 설계된 칩 사이즈는 $3.0{\times}1.8mm2$이며, 총 소모전력은 동작전압 1.8 V에서 55.8 mW이다.

• 한국해양공학회지
• /
• 제26권3호
• /
• pp.61-65
• /
• 2012

Air-water flow measurements are of importance for the coastal and ocean engineering fields. Although kinematic investigations of the multi-phase flows have been conducted for long time, velocity measurements still are concerned with many researchers and engineers in coastal and ocean areas. In the present study, an imaging technique using shadowgraphy and fiber optic probe for velocity measurements of air bubbles is introduced. The shadow graphy image technique is modified from the typical image velocimetry methods, and optical fibers are used for the well-known intrusive coupled phase-detection probe system. Since the imaging technique is a non-intrusive optical method from the air, it is usually applied for 2D flows. On the other hand, the double fiber optic probes touch flows regardless of flow patterns. The results of the flow measurements by both methods are compared and discussed. The methods are also applied to the measurements of overtopping flows by a breaking wave over the structure fixed on the free surface.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제2권11호
• /
• pp.809-814
• /
• 2013

합산영역테이블은 이미지 픽셀 주변 임의의 사각 영역 내 픽셀 값의 합을 4개 픽셀의 합차로 표현할 수 있는 자료구조이다. 그러나 합산영역테이블은 픽셀의 값을 한쪽 모서리에서 다른 쪽 모서리로 순차 누적하므로, 이미지의 크기가 큰 경우에 부동소수점 방식의 표현 범위를 초과하는 문제가 일어날 수 있다. 이를 해결하기 위해 본 논문은 선형 회귀분석을 이용하여 이미지를 근사하고, 회귀분석식과의 차이만을 누적하여 정밀도 누적 오차를 감소시킬 수 있는 제안한다. 또한, 이미지의 복원 시 회귀분석식의 합을 2중 적분을 이용하여 상수시간에 구할 수 있는 방법을 함께 제안 한다. 이미지의 복원에 대한 실험을 수행하였고, 결과는 제안하는 방식이 일반적인 고정오프셋 방식보다 누적 오차를 감소시킴을 보였다.

• 대한원격탐사학회지
• /
• 제25권3호
• /
• pp.295-309
• /
• 2009

In this study, an iterative maximum a posteriori (MAP) approach using a Bayesian model of Markovrandom field (MRF) was proposed for despeckling images that contains speckle. Image process is assumed to combine the random fields associated with the observed intensity process and the image texture process respectively. The objective measure for determining the optimal restoration of this "double compound stochastic" image process is based on Bayes' theorem, and the MAP estimation employs the Point-Jacobian iteration to obtain the optimal solution. In the proposed algorithm, MRF is used to quantify the spatial interaction probabilistically, that is, to provide a type of prior information on the image texture and the neighbor window of any size is defined for contextual information on a local region. However, the window of a certain size would result in using wrong information for the estimation from adjacent regions with different characteristics at the pixels close to or on boundary. To overcome this problem, the new method is designed to use less information from more distant neighbors as the pixel is closer to boundary. It can reduce the possibility to involve the pixel values of adjacent region with different characteristics. The proximity to boundary is estimated using a non-uniformity measurement based on standard deviation of local region. The new scheme has been extensively evaluated using simulation data, and the experimental results show a considerable improvement in despeckling the images that contain speckle.

• Nuclear Engineering and Technology
• /
• 제39권4호
• /
• pp.313-326
• /
• 2007

In this paper, an algorithm to reconstruct two orthogonal images into a three-dimensional image is developed in order to measure the bubble size and volume in a two-phase boiling flow. The central-active contour model originally proposed by P. $Szczypi\'{n}ski$ and P. Strumillo is modified to reduce the dependence on the initial reference point and to increase the contour stability. The modified model is then applied to the algorithm to extract the object boundary. This improved central contour model could be applied to obscure objects using a variable threshold value. The extracted boundaries from each image are merged into a three-dimensional image through the developed algorithm. It is shown that the object reconstructed using the developed algorithm is very similar or identical to the real object. Various values such as volume and surface area are calculated for the reconstructed images and the developed algorithm is qualitatively verified using real images from rubber clay experiments and quantitatively verified by simulation using imaginary images. Finally, the developed algorithm is applied to measure the size and volume of vapor bubbles condensing in a subcooled boiling flow.

• 한국통신학회논문지
• /
• 제28권8C호
• /
• pp.827-834
• /
• 2003

본 논문에서는 간섭원리에 기반한 컴퓨터형성홀로그램과 광굴절매질인 BaTiO$_3$를 이용하여 광 정보 보호 시스템을 구현하였다. 먼저 원영상을 재생할 수 있는 이진위상홀로그램을 생성한 후, 이를 암호화할 영상으로 간주한다. 그리고 이 홀로그램에 간섭 원리를 적용하여 암호화된 영상과 기준영상(키 정보)을 얻는다. 복호화과정은 Mach-Zehnder 간섭계에서 암호화된 영상과 기준영상과의 간섭을 통해 간섭세기 정보를 얻고, 이를 LCD를 이용하여 위상 정보로 변환한 후 푸리에 변환함으로써 원영상을 얻는다. 이 과정에서 두 영상의 간섭을 통해 얻어지는 세기 정보는 주위 진동에 상당히 민감하다. 그래서 광굴절매질인 BaTiO$_3$의 SPPCM 특성을 이용하여 안정한 간섭 무늬를 얻는다. 제안된 방법은 원래의 영상 대신 그 영상의 홀로그램을 암호화하므로 이중 영상 암호 효과의 장점이 있다.

• 대한임베디드공학회논문지
• /
• 제19권1호
• /
• pp.19-25
• /
• 2024

This paper proposes an artificial intelligence-based personal information area object detection optimization method in an embedded system to de-identify personal information in video data. As an object detection optimization method, first, in order to increase the detection rate for personal information areas when detecting objects, a gyro sensor is used to collect the shooting angle of the image data when acquiring the image, and the image data is converted into a horizontal image through the collected shooting angle. Based on this, each learning model was created according to changes in the size of the image resolution of the learning data and changes in the learning method of the learning engine, and the effectiveness of the optimal learning model was selected and evaluated through an experimental method. As a de-identification method, a shuffling-based masking method was used, and double-key-based encryption of the masking information was used to prevent restoration by others. In order to reuse the original image, the original image could be restored through a security key. Through this, we were able to secure security for high personal information areas and improve usability through original image restoration. The research results of this paper are expected to contribute to industrial use of data without personal information leakage and to reducing the cost of personal information protection in industrial fields using video through de-identification of personal information areas included in video data.