• Transactions of Materials Processing
• /
• v.16 no.1 s.91
• /
• pp.42-47
• /
• 2007

LCD-BLU is one of kernel parts of LCD and it consists of several optical sheets: LGP, light source and mold frame. The LGP of LCD-BLU is usually manufactured by etching process and forming numerous dots with $50\sim300{\mu}m$ diameter on the surface. But the surface of the etched dots of LGP is very rough due to the characteristics of the etching process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current etched dot patterned LGP, optical pattern with continuous microlens was designed using optical simulation CAE. Also, a mold with continuous micro-lens was fabricated by UV-LiGA reflow process and applied to 7 inch size of navigator LCD-BLU in the present study.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.8
• /
• pp.720-725
• /
• 2009

Among many kinds of parts for Liquid Crystal Display (LCD), a Back Light Unit (BLU) that changes the path of the light from light source to screen is the most important part to improve optical performances such as uniformity and average value of brightness. Up to recently, design process of BLU has been carried out by depending on the experience of design engineer. Using this approach, however, is proven that it is hard to effectively deal with difficulties in a process of the LCD development such as frequent design modifications, various design requirements, and short-term development. To cope with this situation, we applied a Process Integration and Design Optimization (PIDO) based design environment. PIDO is a software package to integrate multiple simulation processes and find a better solution using various design techniques. In this research, we found a design solution satisfying all design requirements by using the PIDO.

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.1023-1035
• /
• 2008

This study conducted a survey to find out dermatitis patients' preferred garment performance and their sentiment in spring/summer knitwears. SPSS 12.0 program was used for factor analysis, frequency analysis, T-test, ANOVA, and Duncan test. The result was as follows; First, in garments, patients required 'health hygiene', 'practicality in use care', 'skin contact' and 'easy movement'. Especially, 'skin contact' is an important property to be considered in patients' clothes. Second, in garment sensitivity, patients importantly considered 'modesty', 'feminine', 'boldness', 'decency', 'easy movement', 'youth', and 'simplicity'. Third, patients preferred simple and modest plain knitwear in light color with thin and soft fabric such as plain knit. And especially, dot pattern in knitwears should be avoided. Fourth, the preferred style of patients was that 'appropriately fit with suitable ease.' They also preferred 'front closed,' ; 'boat neckline' and 'V neckline'; 'raglan sleeve' and 'set-in sleeve'. For hem trim, they preferred 'rib'. Male preferred simple and plain style with round collar of 'tubular trim' and 'rib trim', while female preferred sophisticated and characteristic style with setin sleeve.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.6
• /
• pp.891-909
• /
• 2019

This study uses a documentary survey, field survey and textile's characteristics to understand the history of the Punggi Viscose Rayon. Punggi's textile industry grew as people migrated from Pyeongan Province in the 1900s. Little is known regarding early production conditions, but documents show cottage industries in the 1940s made union cloth using silk and rayon. The Punggi weaving industry peaked after the Korean War and declined in the late 1950s. Punggi rayon at that time was mainly used for lingerie or lining, with miliary or polka dot patterns. The industry regained momentum when the power loom was introduced in the 1960s. Manufacturers also started weaving union cloth with synthetic fibers and rayon. In the 1990s, jacquard looms enabled the weaving of elaborately colored and patterned textiles for outer fabric that made Punggi rayon famous. Most Punggi rayon looms have developed in the order of manual handlooms, semiautomatic looms, Jokdapgi, to power looms. Looms equipped with dobbies or jacquard devices also changed from wooden dobby looms to wooden jacquard looms and then to iron jacquard looms. Punggi Rayon currently has its own trademark and tag, but lacks specific regulations on the blending of fibers.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.4
• /
• pp.43-48
• /
• 2012

The screen printing method is much used in the flat panel display field including the LCD, PDP, FED, organic EL, and etc. for forming the high precision micro-pattern. Also A number of studies of screen printing method has been conducted as the method for the cost down through the improvement of productivity. Because of being the dot printing method of the cylindrical shape not being the line printing method like the existing PDP barrier rib and phosphor, the pillar arrays using the screen printing method is deposited in the hemispherical type not being cylindrical shape in the existing printing process conditions. In this paper, the parameters were set on the screen printing device in order to deposit the cross-sectional shape with the cone or trapezoid shape of the pillar in depositing the pillars used the screen printing device for vacuum glazing. The cross-sectional shape slope of the pillar according to the parameters was measured. And analysis the effect of the screen printing process conditions on the cross-sectional shape slope of pillars based upon the result of being measured. The processing conditions were drawn to minimize the cross-sectional shape slope of pillar.

• Journal of Korea Game Society
• /
• v.6 no.4
• /
• pp.79-87
• /
• 2006

This paper proposes the design and implementation of engine to control characters by using machine teaming techniques. Because the proposed engine uses the context data in the rum time as the knowledge data, there is a merit which the player can not easily recognize the behavior pattern of the intelligent character. To do this, the paper proposes to develop the module which gathers and trains the context data and the module which tests to decide the optimal context control for the given context data. The developed engine is ported to FEAR and run with Quake2 and experimented far the correctness of the development and its efficiency. The experiments show that the developed engine is operated well and efficiently within the limited time.

• The Journal of Information Technology
• /
• v.5 no.2
• /
• pp.55-67
• /
• 2002

This paper presents an adaptive back propagation algorithm that update the learning parameter by the generated error, adaptively and varies the number of hidden layer node. This algorithm is expected to escaping from the local minimum and make the best environment for convergence to be change the number of hidden layer node. On the simulation tested this algorithm on two learning pattern. One was exclusive-OR learning and the other was $7{\times}5$ dot alphabetic font learning. In both examples, the probability of becoming trapped in local minimum was reduce. Furthermore, in alphabetic font learning, the neural network enhanced to learning efficient about 41.56%~58.28% for the conventional back propagation. and HNAD(Hidden Node Adding and Deleting) algorithm.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.18-21
• /
• 2004

A GFRP based composite blade was developed for a 750kW wind energy conversion system of type class I. The blade sectional geometry was designed to have a general shell-spar structure. The load cases specified in the IEC61400-1 international specification were considered. For withstanding all relevant extreme loads, the structural analysis for the complete blade was performed using a commercial FEM code. The static load carrying capacity, buckling stability, blade tip deflection and natural frequencies at various rotational speeds were evaluated to satisfy the strength requirements in accordance with the IEC61400-1 and GL Regulations. For designing a lightweight blade, the thickness and the lay-up pattern of the skin-foam sandwich structures were optimized iteratively using the DOT program T-bolts were used for joining the blade root and the hub, which were modeled using a 3D FE volume model. In order to confirm the safety of the root connection, the static stresses of the thick root laminate and the steel. bolts were predicted by taking account of the bolt pretension and the root bending moments. The calculated stresses were compared with the material strengths.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.66-75
• /
• 2002

This paper presents an adaptive back propagation algorithm that its able to enhancement for the learning efficiency with updating the learning parameter and varies the number of hidden layer node by the generated error, adaptively. This algorithm is expected to escaping from the local minimum and make the best environment for the convergence of the back propagation neural network. On the simulation tested this algorithm on three learning pattern. One was exclusive-OR learning and the another was 3-parity problem and 7${\times}$5 dot alphabetic font learning. In result that the probability of becoming trapped in local minimum was reduce. Furthermore, the neural network enhanced to learning efficient about 17.6%~64.7% for the existed back propagation. 

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.432-432
• /
• 2007

We studied optical simulation method for ultra slim backlight system. We designed 0.7mm thickness light guide plate and combined 48 white color LEDs for 12 inch wide size TFT-LCD. We designed flat shape PMMA light guide plate with both side patterned. It have vertical prism shape on upper side and ellipse dot pattern on the other side. We targeted 4500 nit brightness and uniform emission characteristic without hot spot or dark area. At first, we designed uniform emission area with more high brightness in center area and then, debugged light entering hot spot zone and direction of outgoing light flux. Although it was designing step, we obtained good result with reverse prism optical sheet and it had good repeatability because it was based on the stamper method in injection process without laser engraving or micro groove engraving method.