• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.6
• /
• pp.430-435
• /
• 2013

A seasonal variation of phytoplankton community in the middle-lower part of the Nakdong River was studied in four sampling stations at monthly intervals from January to December 2012. We identified 40 genera 72 species of phytoplankton. Among these, diatoms were 36 species (50.0%), green algae 20 species (27.8%), blue-green algae 9 species (12.5%) and others 7 species (9.7%), respectively. The phytoplankton standing crops were recorded a maximum of 29,640 cells/mL at the Mulgeum (St. 4) in June and a minimum of 236 cells/mL at the Goryung (St. 1) in October. Also, Standing crops were increased with proceeding from middle part to lower part. Ecological important species were Stephanodiscus hantzschii, Cyclotella meneghiniana, Synedra acus, Aulacoseira granulata, Pediastrum sp. and Microcystis aeruginosa. Seasonal succession of phytoplankton represented that Stephanodiscus hantzschii was dominant species in winter, Cyclotella meneghiniana, Synedra acus was dominant species in spring, Microcystis aeruginosa, Cyclotella meneghiniana, Fragilaria crotonensis, Synedra acus, Aulacoseria granulata was dominant species in summer, and Aulacoseria granulata, Cyclotella meneghiniana, Fragilaria crotonensis was dominant species in autumn. In the community analysis, diversity index and dominant index were higher May~July and December~February, respectively. Also, diversity index and dominant index were decreased and increased with proceeding from middle part to lower part.

• The Korean Journal of Ecology
• /
• v.8 no.3
• /
• pp.171-176
• /
• 1985

The structure of natural vegetation and soil condition in bog area of Woopo, Changnyeung, South Korea were observed. The vegetations in the investigated area could be classified into two groups; a typical bog vegetation with dominant species of Eleocharis mamillats, Acorus calamus and Persicaria hostatosagittata and the transitional vegetation of three neighboring areas. Interspecific correlation in the investigated area was very close. In the typical bog vegetatiion regions (region II, III, V, VI, VII, VIII and X) soil pH, field moisture capacity, available P content and exchangeable K were moderate. But, In the transitiional area I, with the highest humus content, field moisture capacity and exchangeable K Salix gracilistyla was dominant. In the region IV with the lowest humus and a ailable P content and with high soil pH Geophyta was a major component species. Also Acorus region IX with the lowest content of exchangeable K Therophyta was dominant and plant species was diverse due to weak water influence. The vegetation structure of the region IX was most different from that of the whole vegetation.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.1
• /
• pp.300-307
• /
• 2015

Seasonal variation in marine macroalgal community structure was examined at the intertidal zones of Geumgap, Jindo, Korea, from October 2013 to August 2014. In total, 56 macroalgal species were identified, including 9 green, 12 brown, and 35 red algae. Annual seaweed biomass was 548.96 g wet wt. /$m^2$ with seasonal range between 371.08 g wet wt. /$m^2$ at summer and 32.91 g wet wt. /$m^2$ at winter. The dominant seaweed in terms of biomass was Sargassum thunbergii and subdominant species were Gelidium elegans, Sargassum fusiforme, and Ishige okamurae. The vertical distribution of seaweeds from the upper to lower intertidal zones was Gloiopeltis spp., Ulva spp.- S. thunbergii, S. fusiforme, Ishige okamurae - S. thunbergii, S. fusiforme, G. elegans. Annual seaweed coverage, richness index (R), evenness index (J'), and diversity index (H') values were 27.95%, 6.10, 0.38, and 1.38, respectively. Coarsely branched form was the most dominant functional group in terms of species number and biomass among benthic macroalgal species.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.6
• /
• pp.36-50
• /
• 2009

To suggest the native plants combination for restoration of the dissected sloping area, the plant communities of thirty seven quadrats from five localities of mid-southern part of Korean peninsula were surveyed from 2007 to 2008. Their flora, vegetation structure, and dominant species based on the importance value were investigated. And the soil characters (pH, moisture content, water holding capacity, and organic matter) of each dominant species were analyzed. Also, germination tests were performed to check the stability of restored native plants using seed chips. As a result, 79 native plants were suggested for the dissected sloping area : 20 trees and subtrees for the upper layer, 18 shrubs and vines for the middle layer, and 41 herbs for the lower layer, taken together their flora, dominant species, vegetation structure, soil condition, germination test, flowering period.

• KSBB Journal
• /
• v.28 no.2
• /
• pp.80-85
• /
• 2013

The bacterial community structure in a biological reactor fed influent from a wastewater treatment system was investigated by denaturing gradient gel electrophoresis (DGGE) and in situ hybridization. Sludges were collected from three biological reactors (aerobic, oxic, and anoxic tanks) at the M wastewater treatment facility (WTF). The influent of the MWTF consisted of mixed tannery wastewater (40~65%) and seafood wastewater (35~60%). The treatment processes resulted in a removal efficiency for BOD (biochemical oxygen demand) and COD (chemical oxygen demand) of 83.6~98.2% and 72.8~84.6%, respectively for tannery wastewater than for seafood wastewater resulted in greater survival of biomass in the biological reactors and a higher removal of BOD, COD, and T-N of about 8~18%. In contrast, addition of greater amounts of seafood wastewater decreased the amount of biomass in the bioreactors due to the increasing concentration of chromium from that wastewater and it also. The dominant bacterial species during the high seafood wastewater input period were Burkholderia cepacia (JX901049) and an uncultured bacterium (JF247555), while Pseudomonas geniculata (HQ256559) was dominant during the high tannery wastewater input period. Flavobacteriumsp. BF.107 (FM173271) and Hyphomicrobium zavarzinii (Y14306) were dominant under anoxic conditions.

• Korean Journal of Metals and Materials
• /
• v.50 no.9
• /
• pp.629-636
• /
• 2012

Volume shrinkage behavior accompanying the cure of resin formulations might be a critical factor when assembly processes using polymer materials are considered. In this study, cure shrinkage behavior with respect to resin formulation type and heating method was measured on sandwich structure samples by a thermomechanical analyzer (TMA). Quartz, used as a cover material for the sandwich structure, indicated the coefficient of thermal expansion close to $0ppm/^{\circ}C$. When a dynamic heating mode was conducted, a squeeze-out region and a cross-linking region for each resin formulation could be separated clearly with overlapping differential scanning calorimeter results on the TMA results. In addition, a cure shrinkage dominant region and a thermal expansion dominant region in the cross-linking region were distinguished. Consequently, the degree of cure at the initiation of the thermal expansion dominant region was successfully measured. Measurement of all resin formulations indicated the thermal expansion behavior exceeded cure shrinkage before full cure.

• Journal of Environmental Science International
• /
• v.31 no.2
• /
• pp.181-193
• /
• 2022

The study was conducted to provide basic data for stable forest management according to climate change by identifying the ecological characteristics of Mt. Dalma warm temperate forest. 30 survey plots were established for vegetation structure analysis, and communities which classified by applying TWINSPAN analysis and DCA analysis techniques. Four plant communities were subdivided into Quercus acuta-Eurya japonica community, Quercus acuta community, Quercus salicina-Camellia japonica community, and Quercus acuta-Camellia japonica community. The tree layers were dominated by Quercus acuta and Quercus salicina, and the subtree layers were dominated by Camellia japonica and Eurya japonica, and the Sasa borealis. The species diversity index were in the range of 0.849 to 0.969, and the degree of Evenness index were 0.514 to 0.569, and the similarity index were 59.57 to 75.47%. The species composition in the community indicated that the deciduous broad-leaved and coniferous trees have already been eliminated in competition with evergreen broad-leaved trees. Tree species with good cold resistance such as Quercus acuta and Quercus salicina were dominant species under current climatic conditions, but the dominant species might be changed to more shade-tolerance evergreen broad-leaved through the succession.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.1
• /
• pp.92-100
• /
• 2009

This study was carried out to investigate vegetation structure and soil properties of Angelica gigas population distributed in Jeombongsan, Bangtaesan, Odaesan, Gyebangsan and Jirisan. From August 2007 until September 2008, 5m${\times}$5m quadrat was established in native area of Angelica gigas in order to record a dominants and coverage, and soil factors at 20 sites. It was found that the altitude in the distributed areas for Angelica gigas population was 710m or more. Angelica gigas population was classified into Parasencio auriculata var. kamtschatical dominant population, Pseudostellaria palibiniana dominant population, Isodon excisus dominant population and typical dominant population. In the site of study, soil pH, electrical conductivity, soil organic matter, available phosphorous, and exchangeable potassium, exchangeable calcium, exchangeable magnesium, exchangeable natrium concentration and total nitrogen were ranged from 5.1~6.2, 0.1~0.79dS/m, 2.21~22.11%, 9.56~37.97mg/kg, 1.85~23.88cmol+/kg, 0.21~1.18cmol+/kg, 1.07~5.09cmol+/kg, 0.04~0.14cmol+/kg and 0.09~1.04% respectively. The Parasencio auriculata var. kamtschatical dominant population was found in area of high altitude and had high slope degree. But Pseudostellaria palibiniana dominant population was found in area of low altitude and low slope degree. Isodon excisus dominant population was found to have higher soil pH and exchangeable potassium concentration than the other dominant population.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.3
• /
• pp.325-331
• /
• 2022

In this study, austenitic 316L stainless steel was rolled at three different temperatures (100℃, -50℃, -196℃) at five rolling degree (0, 16, 33, 50, 66 and 80%). The rolled specimen was examined for micro structure, and the volume fraction and mechanical properties were evaluated. In particular, the rolling specimen detected the elastic wave generated in tensile and investigated the relationship between the rolling degree and the dominant frequency. As the rolling degree increased, austenite decreased and martensite increased. The volume fraction of martensite more increased at lower temperatures, but increased rapidly at the rolling degree of 50% of all rolling temperature. Tensile strength increased rapidly with the increase of the rolling degree, and was larger at lower temperatures. The elongation decreased sharply to the rolling degree of 33%, but decreased gently thereafter. The dominant frequency highly appeared as the volume fraction of martensite increased, but the dominant frequency was higher at the low temperature rolling temperature. A similar trend was also observed in the relationship between tensile strength and dominant frequency.

• Composites Research
• /
• v.16 no.4
• /
• pp.59-65
• /
• 2003

FEM analysis of the smart skin structure, and application of the sandwich structures investigated. The honeycomb manufactures only provide stillness of thickness direction and transverse shear modulus. Although these are dominant mechanical properties. the other mechanical properties are needed in FEM analysis. Hence, this work shows procedures of obtaining those mechanical properties. Honeycomb material was assumed to be ar, isotropic material and properties are estimated by its dominant honeycomb properties. The other honeycomb properties are then obtained by mechanical properties of Nomex. Buckling test and three point bending test were simulated by ABAQUS. Both the shell and solid element models were used. The results were compared with experimental results and analytical approaches. They showed good agreements. This study shows a guideline of FEM analysis of smart skin structure using commercial a FEM package.