• Journal of People, Plants, and Environment
• /
• v.24 no.3
• /
• pp.277-283
• /
• 2021

Background and objective: This study was conducted to increase understanding of agriculture through agricultural experience programs for adolescents living in self-reliance residence hall, and to investigate changes in work performance ability through changes in hand function. Methods: There were 11 subjects, and the average age was 18.2 years, all males without disabilities. The agricultural experience program consists of a total of 10 sessions including orientation and watching videos on future agriculture, creating vegetable gardens, planting, managing each crop, harvesting, visiting the processing room, and selling at a local food store. Results: The change in agricultural literacy by the agricultural experience program positively improved from a score of 113.73 to 127.91 (p = .008). The changes by sub-item are as follows. The value and safety of agri-foods (p = .020) and agriculture and natural environment (p = .007) were significantly improved. The function and value of rural areas (p = .050), production of agricultural products (p = .160), processing and distribution of agricultural products (p = .248), and agricultural policies (p = .058) were not significantly changed. The simple function of the hands was measured by the number of pegs inserted during 30 seconds, and the assembly function was measured by the number of pegs inserted during 60 seconds. In the case of simple function, the dominant hand was improved from 14.82 to 15.83 (p = .014), andthe non-dominant hand was also significantly improved from 13.79 to 15.01 (p = .002). There was no significant improvement in the simple function (p = .153) and assembly function (p = .770) of both hands. Conclusion: It is considered that the agricultural experience program will enable youths living in self-reliance residence halls to enhance their understanding of agriculture as an occupation, and enable them to play a role as wise consumers by positively affecting improvements in their agricultural literacy and simple hand functions.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.274-281
• /
• 1999

Usually sputtering and electroless plating methods were used for manufacturing metal-alloy thin film magnetic memory devices. Since electroless plating method has many merits in mass production and product variety com­pared to sputtering method, many researches about electroless plating have been performed in the United State of America and Japan. However, electroless plating method has not been studied frequently in Korea. In these respects the purpose of this research is manufacturing Co-Mn-P alloy thin film on the corning glass 2948 by electroless plating method using sodium hypophosphite as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction 0$\alpha$urred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of $80^{\circ}C$. Also magnetic charac­teristics was found to be most excellent at the pH of 9 and the temperature of $70^{\circ}C$, resulting in the coercive force of 8700e and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was $0.216\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand,(1010), (0002), (1011) orientation of hcp for a-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-Mn-P alloy deposition, coercive force was about 1000e more than that of Co P alloy, but squareness had no difference. For crystal orientation, (l01O) and (lOll) orientation of $\alpha$-Co was dominant as same as that of Co- P alloy. Likewise we could confirm the formation of longitudinal magnetization.

• International Journal of Human Ecology
• /
• v.13 no.2
• /
• pp.101-111
• /
• 2012

Children have become the target of intense and specialized food advertising efforts. This study examines the content of TV food advertising and discussed possible concerns from the perspective of children. A total of 102 ads were collected from two cable networks aimed at children. Most of the food ads used emotional appeals and did not provide information clues such as nutrition values. Ads with high sales pressure and celebrity endorsements appeared frequently and the ads for snack foods and high-carbohydrate bakery products were dominant. Understanding food ads can be a significant indicator to establish the orientation of consumer ad education and build educational programs appropriate for children. The issue that appears conspicuous in child targeted advertising and marketing is the childhood obesity and food advertising relation; subsequently, there is a need to evolve advertising that targets children into a positive educational information source.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.7
• /
• pp.1185-1192
• /
• 2003

Governing parameters for determination of the location of crack initiation and direction of crack initiation were investigated by performing fretting fatigue tests and analysis on Al 2024-T351. Fatigue tests were carried out using biaxial fatigue machine. It was shown that the dominant fatigue crack tended to initiate at the outer edge of one of the four bridge pads, growing at an angle beneath a pad, before turning perpendicular to the orientation of the axial load. Distribution of stresses generated during fretting fatigue loading along the interface was calculated by elastic FE simulation. It can be known that the location of crack initiation can be predicted by using the maximum tangential stress range. Futhermore, the crack initiation direction can also be predicted by a maximum tangential stress range.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.180-184
• /
• 2004

The tribological behavior of carbon epoxy composites whose surfaces have many small grooves of $100\mu m$ width was experimentally investigated with respect to the sliding direction against groove orientation, surface pressure (P) and velocity (V). The wear mechanism of the composites was observed to calculate the wear volume with respect to the friction coefficient using scanning electron microscopic (SEM). Experimental results show that the abrasive wear is dominant wear mechanism for the grooved composite surface and the friction and wear are greatly reduced when the sliding direction is parallel to the axis of groove because abrasive particles are removed through the grooves effectively.

• ETRI Journal
• /
• v.34 no.5
• /
• pp.779-782
• /
• 2012

$CuIn_{1-x}Ga_xSe_2$ (CIGS) thin films are grown on Mo/soda lime glass using a reactive sputtering process in which a Se cracker is used to deliver reactive Se molecules. The Cu and $(In_{0.7}Ga_{0.3})_2Se_3$ targets are simultaneously sputtered under the delivery of reactive Se. The effects of Se flux on film composition are investigated. The Cu/(In+Ga) composition ratio increases as the Se flux increases at a plasma power of less than 30 W for the Cu target. The (112) crystal orientation becomes dominant, and crystal grain size is larger with Se flux. The power conversion efficiency of a solar cell fabricated using an 800-nm CIGS film is 8.5%.

• Journal of Biomedical Engineering Research
• /
• v.21 no.2
• /
• pp.189-201
• /
• 2000

Mechanical factors in the human body are considered to play a dominant role in low back problems. Various spinal structures. including muscles, act in unison to resist the external load. An estimation of the muscle forces in this structure requires a knowledge of the orientation, location and area of cross-section of the muscles to complete the formulation of a truly three-dimensional mathematical model of the spine. The geometric parameters which are calculated were the line of action, the centroid and physiologic area of cross-section of each muscle as a function of the spinal level. This geometric data were obtained from CT scans of 11 subjects participating in this study.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3041-3043
• /
• 2000

GUI(graphical user interface) has been the dominant platform for HCI(human computer interaction). The GUI-based style of interaction has made computers simpler and easier to use. However GUI will not easily support the range of interaction necessary to meet users' needs that are natural, intuitive, and adaptive. In this paper we study an approach to track a hand in an image sequence and recognize it, in each video frame for replacing the mouse as a pointing device to virtual reality. An algorithm for real time processing is proposed by estimating of the position of the hand and segmentation, considering the orientation of motion and color distribution of hand region.

• Journal of the Korean Ceramic Society
• /
• v.27 no.5
• /
• pp.652-660
• /
• 1990

Oxidation of Mn-Zn ferrite was made in air at various temperatures ranging from 400$^{\circ}C$ to 1150$^{\circ}C$. Subsequent reduction fo these oxidized samples was also made in air at 1300-1350$^{\circ}C$ where the spinel phase of Mn-Zn ferrite is stable. Morphological observation revealed that the shape of precipitated hematite was plate or lath type on the close-packed habit plane of {111} ferrite which has a definite orientation relationship. The growth of precipitates showed the behavior fo parabolic dependence of the oxidating time. An apparent activation energy for the growth was found to be 125${\pm}$3Kcal/mol. The fact that pores are observed along the precipitates illustrates the oxidation to occur dominantly by the counterdiffusion of cations and ction vacancies. For the reductio reaction pores are found to form at the site once occupied by the precipitates and at the surface. This observation illustrates that the oxygen volitalization from interior region to the surface is the dominant process for the reduction reaction.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.505-508
• /
• 1987

The structure of vacuum evaporated PbO films is investigated. Also, the Photosensitivity and dark resistivity are measured. The dominant structure and orientation of these films were red (tetragonal) form, and <110> and <101> direction under- the suitable deposition conditions. And the crystallite size of them was about $2um{\times}0.2um$. These PbO films have good photosensitivity(r=0.9) and high dark resistivity. (${\rho}=10^{14}{\Omega}{\cdot}cm$)