• 한국전산유체공학회지
• /
• 제16권4호
• /
• pp.47-54
• /
• 2011

A rotating propeller of turboprop aircraft gives much effect on the aerodynamic characteristics of wing such as lift, moment and stall. Specially propeller effect on the wing surface is much more dominant when aircrafts are in landing or take-off conditions. In the present paper, three dimensional Navier-Stokes simulations for the interaction of propeller and wing were carried out for medium sized turboprop aircraft. For rotating propeller, unsteady sliding mesh method was used to simulate a relative motion between moving and static bodies. For the power effect analysis in landing and take off configurations, double slotted flap was also considered and the aerodynamic characteristics were investigated. It was shown that the propeller slipstream enhanced the lift slope including maximum lift by eliminating local flow separation region and this enhancement was more dominant with high lift device.

• 오토저널
• /
• 제11권5호
• /
• pp.55-64
• /
• 1989

The effect of discharge have been investigated for condition of spark in a multiple spark ignition engine, as the spark duration, capacitive and inductive discharge energy were calculated for condition of spark by ignition wave and energy formula. The useful portion of spark discharge is divided into capacitance portion and inductance portion. It was found that capacitive discharge energy and spark duration were increased according to increasing number of spark, and inductive discharge energy was increased according to increasing spark interval. Therefore engine torque was increase and lean misfire limit was extended comparing with the standard ignition system. It found that spark energy was discharged within ignition delay period availability acted on the formation and growth of flame kernel, and total spark energy was increased according to increasing number of spark times, but discharged spark energy after ignition delay became unavailable energy. And the capacitive discharge energy has the dominant effect for stoichiomeric or not very rich air-fuel mixture but inductive discharge energy has the dominant effect for lean air-fuel mixture.

• 한국연초학회지
• /
• 제14권2호
• /
• pp.116-125
• /
• 1992

This experiment was conducted to examine characteristics of agronomic characters and estimate of gene effect for several mutant characters. The genetic populations were derived from cross between 83H-5 and Hicks. There were significant difference for plant height, stlk height, leaf shape and bacterial wilt disease index except leaf number, leaf length, and what is more, F3 variance is more than Bl and B2 generation from cross 83H-5 X Hicks. Gene actions for stalk height and bacterial wilt disease were estimated by 3-parameter, and by 6- parameter model for all characters except above two characters but stalk height and bacterial wilt disease index are not significant in the additive and dominance effects. Dominant$\times$dominant epitasis for plant height, dominant and dominant$\times$dominant epistasis for leaf length, additive and additive$\times$additive and dominant$\times$dominant epistasis for leaf width, and additive and additive$\times$dominant epistasis for days to flower were appeared significant in gene action.

• 대한스포츠의학회지
• /
• 제36권4호
• /
• pp.197-206
• /
• 2018

Purpose: This study analyzed the muscle activity changes induced by motions of reaching forward and chest expansion that were examined from the bilateral muscles with rectus abdominis, external oblique, multifidus, and longissimus thoracic using Pilates cadillac instrument. Methods: Nine young adult women, who have no musculoskeletal disorder and any of chronic diseases, were participated. Surface electromyography system was used for recording of all signals produced by muscles, and then normalized as percentage of maximum voluntary isometric contraction (%MVIC). The paired t-test and repeated measures of analysis of variance was performed. Results: Reaching-forward motion showed a higher muscle activity from non-dominant external oblique muscle than that of the chest-expansion motion. During both reaching-forward motion and chest-expansion motion, MVIC values collected from dominant side of external oblique muscle were shown a significantly lower than the values obtained from non-dominant side (p<0.05). Conversely, %MVIC values in external oblique muscle collected from dominant side showed a significantly higher than the values obtained from non-dominant side of the same oblique muscle (p<0.05). Reaching-forward motion was caused a higher %MVIC on non-dominant external oblique muscle than that of the chest-expansion motion (p<0.05). Regardless of dominant or non-dominant sides, external oblique muscle was shown the highest activation rate of all the other muscles during reaching forward action, and longissimus thoracic muscle was shown the highest activation rate of all the other muscles during chest expansion action. Conclusion: Reaching-forward motion is suitable for activating an external oblique muscle, and chest-expansion motion is an effective enough in activating of longissimus thoracic muscle.

• Geomechanics and Engineering
• /
• 제14권2호
• /
• pp.203-209
• /
• 2018

Reliable estimation of compressive as well as tensile in-situ stresses is critical in the design and analysis of underground structures and openings in rocks. Kaiser effect technique, which uses acoustic emission from rock specimens under cyclic load, is well established for the estimation of in-situ compressive stresses. This paper investigates the Kaiser effect on marble specimens under cyclic uniaxial compressive as well as cyclic uniaxial tensile conditions. The tensile behavior was studied by means of Brazilian tests. Each specimen was tested by applying the load in four loading cycles having magnitudes of 40%, 60%, 80% and 100% of the peak stress. The experimental results confirm the presence of Kaiser effect in marble specimens under both compressive and tensile loading conditions. Kaiser effect was found to be more dominant in the first two loading cycles and started disappearing as the applied stress approached the peak stress, where felicity effect became dominant instead. This behavior was observed to be consistent under both compressive and tensile loading conditions and can be applied for the estimation of in-situ rock stresses as a function of peak rock stress. At a micromechanical level, Kaiser effect is evident when the pre-existing stress is smaller than the crack damage stress and ambiguous when pre-existing stress exceeds the crack damage stress. Upon reaching the crack damage stress, the cracks begin to propagate and coalesce in an unstable manner. Hence acoustic emission observations through Kaiser effect analysis can help to estimate the crack damage stresses reliably thereby improving the efficiency of design parameters.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.325-334
• /
• 2021

In the open system (vessel and pipe), the maximum corrosion rate of carbon steel at ca. 80 ℃ was obtained due to the decrease of dissolved oxygen by increasing the solution temperature. Effect of temperature on the cavitation damage can be explained through several mechanisms. Moreover, when cavitation occurs on the surface of metal and alloys, whether cavitation is erosion or corrosion is still controversial. This work focused on the effect of solution temperature on the corrosion of carbon steel under cavitation in an open system, Tests were performed using an electrochemical cavitation corrosion tester in 3.5% NaCl solution and the effect of solution temperature of carbon steel was discussed. Cavitation corrosion rate can be increased by cavitation, but when the temperature increases, a dissolved oxygen content reduces at a very high speed and thus the maximum cavitation corrosion temperature changed from 80 ℃ to 45 ℃. Below the maximum cavitation temperature, the electrochemical effect was more dominant than the mechanical effect by increasing temperature, but over the maximum cavitation temperature, the mechanical effect was more dominant than the electrochemical effect by increasing temperature.

• 대한정형도수물리치료학회지
• /
• 제24권2호
• /
• pp.29-36
• /
• 2018

Background: The purpose of this study was to investigate the effect of leg lift difference on serratus and upper trapezius when exercising in a scapula in a prone position, a typical waist stabilization exercise for subjects with a winged scapula. Method: Twenty normal adults and 20 subjects with winged scapula participated in the experiment. The surface EMG recordings were obtained from external oblique muscle and internal oblique muscle during scapula protraction exercise. The presence or absence of winging of the shoulder bone was measured using an electronic digital caliper for the distance the medial border of the scapula is lifted to the rear. In prostrate pier movement posture in both groups, both legs supporting, dominant leg lifting, and non-dominant leg lifting including the scapula protraction were conducted respectively. Results: In the results of comparison between the two groups, the dominant external oblique muscle and the non-dominant internal oblique muscle tended to increase according to the difference of the leg lifting of normal people. In the winged scapula group, internal oblique muscle showed increased muscle activity more than external oblique muscle. Conclusion: It was most effective to exercise with lifting the same position leg for strengthening the same external oblique muscle, and the opposite internal oblique muscle. Also, it is effective to exercise in prone pier movement posture for trunk stability. In addition, internal oblique muscle shows increased muscle activity in subjects with winged scapula. Therefore, appropriate adjustment of external oblique muscle and internal oblique muscle may have a positive effect on scapula dysfunction for trunk stability.

• Wind and Structures
• /
• 제11권5호
• /
• pp.361-376
• /
• 2008

This paper considers internal pressure fluctuations for a range of building volumes and dominant wall opening areas. The study recognizes that the air flow in and out of the dominant opening in the envelope generates Helmholtz resonance, which can amplify the internal pressure fluctuations compared to the external pressure, at the opening. Numerical methods were used to estimate fluctuating standard deviation and peak (i.e. design) internal pressures from full-scale measured external pressures. The ratios of standard deviation and peak internal pressures to the external pressures at a dominant windward wall opening of area, AW are presented in terms of the non-dimensional opening size to volume parameter, $S^*=(a_s/\bar{U}_h)^2(A_W^{3/2}/V_{Ie})$ where $a_s$ is the speed of sound, $\bar{U}_h$ is the mean wind speed at the top of the building and $V_{Ie}$ is the effective internal volume. The standard deviation of internal pressure exceeds the external pressures at the opening, for $S^*$ greater than about 0.75, showing increasing amplification with increasing $S^*$. The peak internal pressure can be expected to exceed the peak external pressure at the opening by 10% to 50%, for $S^*$ greater than about 5. A dominant leeward wall opening also produces similar fluctuating internal pressure characteristics.

• 복식
• /
• 제61권10호
• /
• pp.89-103
• /
• 2011

The purpose of this study is to analyze the effects of dominant brand, the quality variation among brands in the extension product category and the self-construals on consumer's attitude about extension products. The experimental design consist of three-way complex factors and 226 subjects participated for the study. The results showed that when there was fashion brand extension, whether or not there was an existing dominant brand in the extension product category, the quality variation among brands in the extension product category and the types of self-construals had a significant interaction effect on their favorableness and intention to purchase the extension products. Regardless of an existing dominant brand however, the group who had an interdependent self-construal showed higher favorableness and intention to purchase the extension products when the quality variation among brands in the extension product category was lower than when it was high, whereas the group who had an independent self-construal showed no significant difference of the favorableness and intention to purchase the extension products.

• PNF and Movement
• /
• 제11권2호
• /
• pp.127-134
• /
• 2013

Purpose : The purpose of this study of normal elderly and stroke patients by comparing the dominant side and recessive side was to evaluate the differents between each Methods : Thirty-two elderly participated in this study. They were classified two groups: stroke patients group and the normal elderly group. Outcome measures were: general characteristics and BMD. General characteristics included age, height, weight and body mass index. BMD was represented in the osteoporosis index, T-score and Z-score. The measurements of bone mineral density were evaluated on the calcaneus region of the dominant and recessive side, using OsteoPro. The data analyzed using SPSS 17.0 software and the Paired-sample T-test and the Independent-sample T-test Results : OI, T-score, Z-score showed no significant differences between dominant side and recessive side in normal elderly group. But stroke patients group showed OI, T-score, Z-score significant differences between paretic side and nonparetic side. Change score subtracted recessive side from dominant side was significant differences between stroke patients group and normal elderly group. Conclusion : There is positive relationship between physical activity and BMD in stroke patients. Therefore, improved physical activity can have a beneficial effect by reducing osteoporosis in stroke patients, considering a positive relationship between physical activity and BMD.